Date: Wed, 27 Nov 2002 13:20:31 -0600 From: "Brian Henning" <b1henning@hotmail.com> To: <questions@FreeBSD.ORG> Subject: dmesg for modem Message-ID: <OE59JrNKBqujsclWXSZ000109cc@hotmail.com>
next in thread | raw e-mail | index | archive | help
Hello, i have a winmodem onboard in my laptop and i was trying to see if freebsd recognizes it in dmesg. what should i grep for to see if it is in there? it is a LT win modem and i don't think it will work with bsd, i just want to find it in dmesg. thanks, brian Copyright (c) 1992-2002 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.0-DP2 #1: Sat Nov 16 13:38:33 GMT 2002 root@tomcat.bmah.org:/usr/obj/usr/src/sys/GENERIC Preloaded elf kernel "/boot/kernel/kernel" at 0xc0679000. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc06790a8. Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 696582327 Hz CPU: Pentium III/Pentium III Xeon/Celeron (696.58-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x686 Stepping = 6 Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV, PAT,PSE36,MMX,FXSR,SSE> real memory = 67043328 (63 MB) avail memory = 58204160 (55 MB) Initializing GEOMetry subsystem Pentium Pro MTRR support enabled npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <PTLTD RSDT > on motherboard Using $PIR table, 7 entries at 0xc00fdf50 acpi0: power button is handled as a fixed feature programming model. Timecounter "ACPI-safe" frequency 3579545 Hz acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 acpi_cpu0: <CPU> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 ---- initial configuration ------------------------ \\_SB_.LNKD irq 10: [ 10] low,level,sharable 0.7.3 \\_SB_.LNKA irq 10: [ 10] low,level,sharable 0.4.0 \\_SB_.LNKB irq 10: [ 10] low,level,sharable 0.4.1 \\_SB_.LNKC irq 5: [ 3 5 7 9 10 11] low,level,sharable 0.8.0 \\_SB_.LNKD irq 10: [ 10] low,level,sharable 0.16.0 \\_SB_.LNKB irq 10: [ 10] low,level,sharable 0.16.1 \\_SB_.LNKB irq 10: [ 10] low,level,sharable 0.17.0 \\_SB_.LNKD irq 10: [ 10] low,level,sharable 0.17.1 ---- before setting priority for links ------------ ---- before fixup boot-disabled links ------------- ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- \\_SB_.LNKD irq 10: [ 10] low,level,sharable 0.7.3 \\_SB_.LNKA irq 10: [ 10] low,level,sharable 0.4.0 \\_SB_.LNKB irq 10: [ 10] low,level,sharable 0.4.1 \\_SB_.LNKC irq 5: [ 3 5 7 9 10 11] low,level,sharable 0.8.0 \\_SB_.LNKD irq 10: [ 10] low,level,sharable 0.16.0 \\_SB_.LNKB irq 10: [ 10] low,level,sharable 0.16.1 \\_SB_.LNKB irq 10: [ 10] low,level,sharable 0.17.0 \\_SB_.LNKD irq 10: [ 10] low,level,sharable 0.17.1 pci0: <ACPI PCI bus> on pcib0 agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 ---- initial configuration ------------------------ \\_SB_.LNKA irq 10: [ 10] low,level,sharable 1.0.0 ---- before setting priority for links ------------ ---- before fixup boot-disabled links ------------- ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- \\_SB_.LNKA irq 10: [ 10] low,level,sharable 1.0.0 pci1: <ACPI PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) cbb0: <TI1420 PCI-CardBus Bridge> at device 4.0 on pci0 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 pcib0: slot 4 INTA is routed to irq 10 cbb1: <TI1420 PCI-CardBus Bridge> at device 4.1 on pci0 cardbus1: <CardBus bus> on cbb1 pccard1: <16-bit PCCard bus> on cbb1 pcib0: slot 4 INTB is routed to irq 10 isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 ATA33 controller> port 0x1050-0x105f at device 7.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x1060-0x107f irq 10 at device 7.2 on pci0 usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached) pci0: <multimedia, audio> at device 8.0 (no driver attached) pci0: <simple comms> at device 16.0 (no driver attached) atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model IntelliMouse, device ID 3 acpi_ec0: <embedded controller> port 0x66,0x62 on acpi0 acpi_acad0: <AC adapter> on acpi0 acpi_cmbat0: <Control method Battery> on acpi0 fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ppc0 port 0x378-0x37f irq 7 on acpi0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 orm0: <Option ROMs> at iomem 0xe4000-0xe7fff,0xc0000-0xcffff on isa0 pmtimer0 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 or not responding sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 10.000 msec acpi_cpu: CPU throttling enabled, 8 steps from 100% to 12.5% ed1: <D-Link DFE-670TXD> at port 0x100-0x11f irq 10 function 0 config 32 on pccard0 ed1: address 00:05:5d:51:49:e6, type Linksys (16 bit) ukphy0: <Generic IEEE 802.3u media interface> on miibus0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ata1-slave: timeout waiting for interrupt ata1-slave: ATAPI identify failed ad0: 9590MB <FUJITSU MHM2100AT> [19485/16/63] at ata0-master UDMA33 acd0: CDROM <SR243T> at ata1-master PIO4 MBREXT Slice 5 on ad0s3: 0000 00 01 c1 fc 0b fe ff ff 3f 00 00 00 89 06 31 00 |........?.....1.| [0] f:00 typ:11 s(CHS):252/1/193 e(CHS):255/254/255 s:63 l:3212937 0000 00 00 c1 ff 05 fe ff ff c8 06 31 00 82 7d 00 00 |..........1..}..| [1] f:00 typ:5 s(CHS):255/0/193 e(CHS):255/254/255 s:3213000 l:32130 MBREXT Slice 6 on ad0s3: 0000 00 01 c1 ff 01 fe ff ff 3f 00 00 00 43 7d 00 00 |........?...C}..| [0] f:00 typ:1 s(CHS):255/1/193 e(CHS):255/254/255 s:63 l:32067 0000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 Mounting root from ufs:/dev/ad0s2a WARNING: / was not properly dismounted WARNING: /tmp was not properly dismounted /tmp: superblock summary recomputed WARNING: /usr was not properly dismounted /usr: superblock summary recomputed netsmb_dev: loaded To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?OE59JrNKBqujsclWXSZ000109cc>