Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 8 Sep 2014 12:16:53 -0300
From:      Thiago Farina <tfransosi@gmail.com>
To:        Adrian Chadd <adrian@freebsd.org>
Cc:        "freebsd-wireless@freebsd.org" <freebsd-wireless@freebsd.org>, Nathan Whitehorn <nwhitehorn@freebsd.org>
Subject:   Re: Issues with urtwn
Message-ID:  <CACnwZYcTJFncV7p_1hVKi=QCuHz%2BzRxE70sKs89d8B=vOBkMKw@mail.gmail.com>
In-Reply-To: <CAJ-Vmonrxc2CY%2BLsY4jeh19MbELxDcP6iHXGCyogV_9H6%2BnwOw@mail.gmail.com>
References:  <540C751F.6050202@freebsd.org> <CACnwZYfK_F4KnzsbrWnZS3sPB22HJ=v03VuhOTfFa8usFy_45w@mail.gmail.com> <CAJ-Vmonrxc2CY%2BLsY4jeh19MbELxDcP6iHXGCyogV_9H6%2BnwOw@mail.gmail.com>

next in thread | previous in thread | raw e-mail | index | archive | help
On Sun, Sep 7, 2014 at 11:36 PM, Adrian Chadd <adrian@freebsd.org> wrote:
> Hi,
>
> On 7 September 2014 19:16, Thiago Farina <tfransosi@gmail.com> wrote:
>> On Sun, Sep 7, 2014 at 12:09 PM, Nathan Whitehorn
>> <nwhitehorn@freebsd.org> wrote:
>>> I've been having some issues with connection stability in urtwn for several
>>> months. The usual symptom is that after some period of time the connection
>>> will apparently stall. If I'm running ping continuously, for instance, it
>>> will at some point stop receiving replies. Then, sometime later, immediately
>>> if I use the "reassociate" command in wpa_cli, the connection will fix
>>> itself and all the packets I didn't get earlier get delivered at once:
>>> hundreds of ping replies, for instance, some with time stamps minutes in the
>>> past. No data is actually lost, though.
>>>
>>> I think the issue is that the driver does not actually support powersave
>>> mode (maybe it should?) but reports to the AP that it does:
>>>
>>>> ifconfig wlan0 list sta (this is on the AP)
>>> ADDR               AID CHAN RATE RSSI IDLE  TXSEQ  RXSEQ CAPS FLAG
>>> 80:1f:02:cc:47:a9    1   11  11M  8.5    0   5526  55712 EPS AE      RSN
>>>
>>> I don't know enough about wireless to fix this, but the AP waiting for a
>>> powersave poll and never getting one seems consistent with the problem.
>>
>> I think what you are relating here is what I observed recently too.
>> Sorry, I'm new to FreeBSD. Just installed it recently, and I noticed
>> that after I left it idle (I went to do something for some hours) for
>> some time it lost the connection. Only rebooting makes it connect
>> again to my network.
>
> Which NIC are you seeing this on?
>
Mine is urtwn0: Realtek RTL8187L from my Gateway laptop.

--
Thiago Farina



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CACnwZYcTJFncV7p_1hVKi=QCuHz%2BzRxE70sKs89d8B=vOBkMKw>