Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 14 Feb 2007 16:34:18 -0600
From:      Derek Ragona <derek@computinginnovations.com>
To:        "Dak Ghatikachalam" <dghatikachalam@gmail.com>, "FreeBSD - Questions" <freebsd-questions@freebsd.org>
Subject:   Re: RAID 10-LUN Question
Message-ID:  <6.0.0.22.2.20070214161344.0278ad60@mail.computinginnovations.com>
In-Reply-To: <ba29b9b40702141254v4ca8e5c9n21ee1083781c37dc@mail.gmail.co m>
References:  <ba29b9b40702141254v4ca8e5c9n21ee1083781c37dc@mail.gmail.com>

next in thread | previous in thread | raw e-mail | index | archive | help
RAID 10 uses even numbered drive sets, usually in 4's, so 4 drives, 8 
drives, 12 drives, etc.  Depending on how 24/7 self-managed you want the 
array, you should plan for at least 2 hot spare drives for fail over.

So in your setup you could have one logical array made up of 12 drives, 
with 2 spares, and one left for the OS.  One consideration in striping is 
the stripe size.  Stripe size effects performance but also storage 
efficiency.  So you want to balance those factors in choosing a stripe size.

One last issue, is make sure you have enough cache on the RAID controller.

         -Derek


At 02:54 PM 2/14/2007, Dak Ghatikachalam wrote:
>Hi Freebsd
>
>
>We have DELL/EMC CX-300 storage array hardware , Navisphere. , which consist
>of  15 Disks 320GB, I am planning to use this for Oracle( Linux) + SQL
>server(M$) purpose.
>
>We need to get that redundancy using RAID 10 and  striple for the best
>performance.
>
>My thoughts are  take most even number of possible disks( leaving private
>system partition area) and create the raid groups and kick a separate LUNS
>for MSSQL purpose.
>
>With this hardware config, Do you have any suggestion on getting the best
>performance and redundancy in place
>
>Thanks
>Dak
>_______________________________________________
>freebsd-questions@freebsd.org mailing list
>http://lists.freebsd.org/mailman/listinfo/freebsd-questions
>To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org"
>
>--
>This message has been scanned for viruses and
>dangerous content by MailScanner, and is
>believed to be clean.
>MailScanner thanks transtec Computers for their support.
>

-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
MailScanner thanks transtec Computers for their support.




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?6.0.0.22.2.20070214161344.0278ad60>