Date: Thu, 29 Mar 2007 13:16:44 +0200 From: Martin Moeller <mm@exsomnis.de> To: freebsd-questions@freebsd.org Subject: SATA DVD-RW drive not recognised by FreeBSD Message-ID: <20070329111644.GA19752@medea.exsomnis.de>
next in thread | raw e-mail | index | archive | help
--8GpibOaaTibBMecb
Content-Type: multipart/mixed; boundary="nFreZHaLTZJo0R7j"
Content-Disposition: inline
--nFreZHaLTZJo0R7j
Content-Type: text/plain; charset=iso-8859-1
Content-Disposition: inline
Content-Transfer-Encoding: quoted-printable
Hi all,
I have some trouble with my SATA-DVDRW. It's not recognised in the boot
process, although I think all kernel settings are correct. A SATA
harddisk works fine. Is there a general issue with SATA-dvd burners?
**********************************
** MY KERNEL VERSION **
**********************************
FreeBSD medea.exsomnis.de 6.2-STABLE FreeBSD 6.2-STABLE #2: Fri Mar 2
07:16:55 CET 2007 mm@medea.exsomnis.de:/usr/obj/usr/src/sys/KERNEL
amd64
**********************************
** OUTPUT OF dmesg **
**********************************
attached file (dmesg.txt)
--=20
Mit freundlichen Gr=FC=DFen
Martin M=F6ller <mm@exsomnis.de>
--nFreZHaLTZJo0R7j
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="dmesg.txt"
Content-Transfer-Encoding: quoted-printable
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-STABLE #2: Fri Mar 2 07:16:55 CET 2007
mm@medea.exsomnis.de:/usr/obj/usr/src/sys/KERNEL
ACPI APIC Table: <Nvidia AWRDACPI>
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 Processor 3500+ (2211.34-MHz K8-class CPU)
Origin =3D "AuthenticAMD" Id =3D 0x20ff2 Stepping =3D 2
Features=3D0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE=
,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
Features2=3D0x1<SSE3>
AMD Features=3D0xe2500800<SYSCALL,NX,MMX+,FFXSR,LM,3DNow!+,3DNow!>
AMD Features2=3D0x1<LAHF>
real memory =3D 1073676288 (1023 MB)
avail memory =3D 1027543040 (979 MB)
ioapic0 <Version 1.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <Nvidia AWRDACPI> on motherboard
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi0: Power Button (fixed)
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <memory> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xcc102000-0xcc102fff at device =
2.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 10 ports with 10 removable, self powered
ehci0: <NVIDIA nForce4 USB 2.0 controller> mem 0xfeb00000-0xfeb000ff at dev=
ice 2.1 on pci0
ehci0: [GIANT-LOCKED]
usb1: EHCI version 1.0
usb1: companion controller, 4 ports each: usb0
usb1: <NVIDIA nForce4 USB 2.0 controller> on ehci0
usb1: USB revision 2.0
uhub1: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 10 ports with 10 removable, self powered
umass0: Verbatim Store 'n' Go Pro, rev 2.00/2.00, addr 2
pcm0: <nVidia nForce4> port 0xd400-0xd4ff mem 0xcc101000-0xcc101fff irq 20 =
at device 4.0 on pci0
pcm0: <Avance Logic ALC850 AC97 Codec>
atapci0: <nVidia nForce CK804 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x=
170-0x177,0x376,0xf000-0xf00f at device 6.0 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
atapci1: <nVidia nForce CK804 SATA300 controller> port 0x9f0-0x9f7,0xbf0-0x=
bf3,0x970-0x977,0xb70-0xb73,0xd000-0xd00f mem 0xcc100000-0xcc100fff irq 21 =
at device 7.0 on pci0
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
pcib1: <ACPI PCI-PCI bridge> at device 9.0 on pci0
pci5: <ACPI PCI bus> on pcib1
pci5: <multimedia, video> at device 7.0 (no driver attached)
pci5: <multimedia> at device 7.1 (no driver attached)
ath0: <Atheros 5212> mem 0xcb000000-0xcb00ffff irq 18 at device 8.0 on pci5
ath0: Ethernet address: 00:0f:3d:ab:91:e2
ath0: mac 5.9 phy 4.3 radio 4.6
atapci2: <SiI 3114 SATA150 controller> port 0x9000-0x9007,0x9400-0x9403,0x9=
800-0x9807,0x9c00-0x9c03,0xa000-0xa00f mem 0xcb014000-0xcb0143ff irq 19 at =
device 10.0 on pci5
ata4: <ATA channel 0> on atapci2
ata5: <ATA channel 1> on atapci2
ata6: <ATA channel 2> on atapci2
ata7: <ATA channel 3> on atapci2
skc0: <Marvell Gigabit Ethernet> port 0xa400-0xa4ff mem 0xcb010000-0xcb013f=
ff irq 17 at device 12.0 on pci5
skc0: Marvell Yukon Lite Gigabit Ethernet rev. (0x9)
sk0: <Marvell Semiconductor, Inc. Yukon> on skc0
sk0: Ethernet address: 00:17:31:a6:a0:e4
miibus0: <MII bus> on sk0
e1000phy0: <Marvell 88E1000 Gigabit PHY> on miibus0
e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX,=
auto
pcib2: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pci4: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 12.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 13.0 on pci0
pci2: <ACPI PCI bus> on pcib4
pci2: <display, VGA> at device 0.0 (no driver attached)
pci2: <display> at device 0.1 (no driver attached)
pcib5: <ACPI PCI-PCI bridge> at device 14.0 on pci0
pci1: <ACPI PCI bus> on pcib5
acpi_tz0: <Thermal Zone> on acpi0
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xd0000-0xd3fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 2211343459 Hz quality 800
Timecounters tick every 1.000 msec
ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding disabled,=
default to deny, logging limited to 10 packets/entry by default
ad0: 152627MB <Seagate ST3160023A 8.01> at ata0-master UDMA100
acd0: DVDROM <PLEXTOR DVD-ROM PX-130A/1.02> at ata1-master UDMA33
ad6: 238475MB <Seagate ST3250624AS 3.AAE> at ata3-master SATA300
cd0 at ata1 bus 0 target 0 lun 0
cd0: <PLEXTOR DVD-ROM PX-130A 1.02> Removable CD-ROM SCSI-0 device=20
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present - t=
ray closed
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <VBTM Store 'n' Go Pro 6.51> Removable Direct Access SCSI-0 device=20
da0: 40.000MB/s transfers
da0: 961MB (1970175 512 byte sectors: 64H 32S/T 961C)
Trying to mount root from ufs:/dev/ad0s2a
sk0: link state changed to UP
ath0: link state changed to UP
--nFreZHaLTZJo0R7j--
--8GpibOaaTibBMecb
Content-Type: application/pgp-signature
Content-Disposition: inline
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.7 (FreeBSD)
iD8DBQFGC6AcRS97iHMQlZ8RAog5AKDIQ3etH2/Pf1/bl+tV/4muSHWtIACeNmp7
iyJA2gmxUtLrAS8voQ4URrE=
=wnfp
-----END PGP SIGNATURE-----
--8GpibOaaTibBMecb--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20070329111644.GA19752>