Date: Mon, 26 Aug 1996 11:22:31 -0300 (EST) From: "Alexsandro D. F. Correia" <acorreia@marlin.com.br> To: kuku@gilberto.physik.RWTH-Aachen.DE Cc: questions@freebsd.org Subject: Re: Problems with backups!!! (fwd)] Message-ID: <Pine.BSF.3.91.960826110553.8840A-100000@blue.marlin.com.br> In-Reply-To: <199608261201.JAA07893@marlin.com.br>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi ! My Dat drive is an EXABYTE 4200 , i use 4mm tapes . The output of dmesg, shows me this : FreeBSD 2.1.0-RELEASE #0: Fri Mar 8 09:29:15 EST 1996 imbert@blue.marlin.com.br:/usr/src/sys/compile/flavio CPU: 99-MHz Pentium 735\\90 or 815\\100 (Pentium-class CPU) Origin = "GenuineIntel" Id = 0x525 Stepping=5 Features=0x1bf<FPU,VME,PSE,MCE,CX8,APIC> real memory = 33554432 (32768K bytes) avail memory = 30838784 (30116K bytes) Probing for devices on the ISA bus: sc0 at 0x60-0x6f irq 1 on motherboard sc0: VGA color <16 virtual consoles, flags=0x0> ed1 at 0x300-0x31f irq 5 on isa ed1: address 00:20:18:01:62:35, type NE2000 (16 bit) sio0 at 0x3f8-0x3ff irq 4 on isa sio0: type 16550A sio1 at 0x2f8-0x2ff irq 3 on isa sio1: type 16550A sio2 not found at 0x3e8 sio3 not found at 0x2e8 lpt0 at 0x378-0x37f irq 7 on isa lpt0: Interrupt-driven port lp0: TCP/IP capable interface fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: NEC 765 fd0: 1.44MB 3.5in npx0 on motherboard npx0: INT 16 interface Probing for devices on the PCI bus: chip0 <Intel 82437 (Triton)> rev 2 on pci0:0 chip1 <Intel 82371 (Triton)> rev 2 on pci0:7 ahc0 <Adaptec 2940 SCSI host adapter> rev 3 int a irq 10 on pci0:9 ahc0: 2940 Single Channel, SCSI Id=7, aic7870, 255 SCBs ahc0 waiting for scsi devices to settle (ahc0:1:0): "QUANTUM VP32210 81H8" type 0 fixed SCSI 2 sd0(ahc0:1:0): Direct-Access 2103MB (4308352 512 byte sectors) (ahc0:2:0): "PIONEER CD-ROM DR-124X 1.00" type 5 removable SCSI 2 cd0(ahc0:2:0): CD-ROM cd0(ahc0:2:0): NOT READY asc:3a,0 Medium not present can't get the size ahc0:A:3: refuses syncronous negotiation. Using asyncronous transfers (ahc0:3:0): "EXABYTE EXB-4200 216" type 1 removable SCSI 2 st0(ahc0:3:0): Sequential-Access density code 0x13, drive empty vga0 <VGA-compatible display device> rev 227 int a irq 11 on pci0:10 changing root device to sd0a in_rtqtimo: adjusted rtq_reallyold to 2400 in_rtqtimo: adjusted rtq_reallyold to 1600 in_rtqtimo: adjusted rtq_reallyold to 1066 in_rtqtimo: adjusted rtq_reallyold to 710 pid 25562: ftp: uid 1007: exited on signal 11 st0(ahc0:3:0): NOT READY asc:3a,0 Medium not present swap_pager: out of space Process 8820 killed by vm_fault -- out of swap Process 8819 killed by vm_fault -- out of swap swap_pager: out of space I 've tried to use the command mt -f /dev/rst0 blocksize 512 I can do the backups, but i cant restore it !!! the machine crashes ! Thanx for your attention. Alexsandro > >> Sirs, > >> > >> Last week a sent a message , asking for help !! > >> I think my message didn't arrive to you. > >> > >> I'm having a terrible problem here to restore my backups, and i > >> hope you can help me. > >> Bellow, you can read the original message. > > > >What type of tape do you have? Is it an HP DAT ? What does the > >output of 'dmesg' show? > > > >Have you tried > > > >mt -f /dev/rst0 blocksize 256k > > > >Just guessing. > > > >> > >> Thanx a lot. > >> > >> Alexsandro > >> > >> ---------- Forwarded message ---------- > >> Date: Mon, 19 Aug 1996 11:21:11 -0300 (EST) > >> From: Alexsandro D. F. Correia <acorreia@marlin.com.br> > >> To: questions@freebsd.org > >> Cc: hackers@freebsd.org > >> Subject: Problems with backups!!! > >> > >> > >> Hi Sirs, > >> > >> I'm having lots of troubles with my backups, and i hope someone can HELP ME. > >> > >> Here we have two machines with the same configuration. > >> Pentium 100, 32 Mb RAM, HD 2.0 gb SCSI and a DAT TAPE DRIVER (EXABYTE) . > >> Running FreeBSD 2.1. > >> > >> That's the problem i have. > >> > >> When i try to restore a backup, using tar for examplem my system crashes. > >> Here follows the error msg the system sends to me: > >> > >> ahc0:target 3,lun 0 (st0) timet out > >> st0(ahc0:3:0):BUS DEVICE RESET message > >> Queued. > >> st0(ahc0:3:0):TAEGET Busy > >> ahc0:A:3:no active SCB for reconnecting > >> target - issuing ABORT. > >> SAVED_TCL == 0x30 > >> ahc0:target1,lun0(sd0) timed out > >> > >> By the way, I tested the restore on both machines, using CPIO and TAR. > >> But everytime i try to access something from the tape to the HD, the > >> system crashes. > >> > >> > >> Please, I'll be very glad if someone help me. > >> > >> Thanx a lot. > >> > >> Alexsandro Correia > >> > >> > >> > >> > > >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.3.91.960826110553.8840A-100000>