Date: Thu, 6 Feb 2003 10:19:12 -0500 From: The Anarcat <anarcat@anarcat.ath.cx> To: freebsd-current@freebsd.org Subject: xmms looping forever Message-ID: <20030206151912.GA809@lenny.anarcat.ath.cx>
next in thread | raw e-mail | index | archive | help
--jI8keyz6grp/JLjh
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
Content-Transfer-Encoding: quoted-printable
Hi!
I recently upgraded my machine from 4.7-stable to 5.0-release. The
upgrade went almost smoothly. I say almost because so many things
changed between 4.x and -current that I missed a few. :) But overall,
I'm quite happy with the results.
I had problems with almost all my apps, at first. Third part
applications that weren't recompiled during the buildworld (ports) had
linking problems. Take wget, for example:
anarcat@lenny[~]% wget
/usr/libexec/ld-elf.so.1: /usr/local/lib/libintl.so.4: Undefined symbol "st=
pcpy"
anarcat@lenny[~]%=20
Recopmiling wget solves the problem.
Some folks pointed out to me this might be due to the fact I forgot to
include COMPAT4X=3Dyes in my make.conf. At first I had considered
upgrading from -release to -current (because I'm a careless freak), so
I already had my /usr/src cvsup'd to yesterday's current. So I builded
world over that and installed it.
Of course, that didn't solve the linking problem. But it made another
problem appear. My dear user-friendly xmms now fails to start. This
machine is used by the whole family here and I got really embarrassed
over this. :) xmms seemed to pop an empty window, and sucked all the
CPU time available on my AMD Druon 1GHz:
CPU states: 14.4% user, 0.0% nice, 84.4% system, 1.2% interrupt, 0.0% id=
le
Mem: 116M Active, 56M Inact, 92M Wired, 600K Cache, 92M Buf, 862M Free
Swap: 498M Total, 1452K Used, 496M Free
=2E..
891 anarcat 115 0 15820K 7060K RUN 0:05 82.69% 18.31% xmms
=2E..
So I told my self, "eh, that's -current for you!" ;) And I thought
that -release wasn't so bad after all and that the upgrade didn't give
me anything good anyways. So I downgraded to -release.
Without success. xmms hangs as before. But it used to work on
-release!!! How is that possible?
Using SIGINFO, I've witnessed the following:
load: 1.12 cmd: xmms 9744 [*Giant] 0.33u 0.85s 1% 7144k
load: 1.19 cmd: xmms 9744 [*Giant] 0.41u 1.06s 1% 7144k
load: 1.19 cmd: xmms 9744 [running] 0.41u 1.09s 1% 7144k
load: 1.19 cmd: xmms 9744 [*Giant] 0.41u 1.12s 1% 7144k
load: 1.19 cmd: xmms 9744 [running] 0.41u 1.14s 1% 7144k
But I'm able to see this only when it system is loaded (with the
compilation of a port, for example). So I suspect xmms is somehow
looping over the giant lock, for some reason.
truss gives me the following:
sigprocmask(0x3,0x28144710,0x0) =3D 0 (0x0)
SIGNAL 27
SIGNAL 27
gettimeofday(0x281678b8,0x0) =3D 0 (0x0)
sigprocmask(0x3,0x28167924,0x0) =3D 0 (0x0)
sigreturn(0xbfbff4a0) =3D 0 (0x0)
sigreturn(0xbfbff330) =3D 135891072 (0x8198880)
sigreturn(0xbfbff330) =3D 135891072 (0x8198880)
sigreturn(0xbfbff330) =3D 135891072 (0x8198880)
And ktrace:
26035 xmms CALL mmap(0,0x4788,0x3,0x1000,0xffffffff,0,0,0)
26035 xmms RET mmap 686489600/0x28eb0000
26035 xmms CALL munmap(0x28eb0000,0x4788)
26035 xmms RET munmap 0
26035 xmms CALL mprotect(0x28e3c000,0x62000,0x5)
26035 xmms RET mprotect 0
26035 xmms CALL sigprocmask(0x3,0x28144710,0)
26035 xmms RET sigprocmask 0
26035 xmms PSIG SIGPROF caught handler=3D0x28159510 mask=3D0x0 code=
=3D0x0
26035 xmms CALL gettimeofday(0x281678b8,0)
26035 xmms RET gettimeofday 0
26035 xmms CALL sigprocmask(0x3,0x28167924,0)
26035 xmms RET sigprocmask 0
26035 xmms CALL sigreturn(0xbfbff4a0)
26035 xmms RET sigreturn JUSTRETURN
26035 xmms PSIG SIGSEGV caught handler=3D0x28159510 mask=3D0x0 code=
=3D0xc
26035 xmms CALL sigreturn(0xbfbff330)
26035 xmms RET sigreturn JUSTRETURN
26035 xmms PSIG SIGSEGV caught handler=3D0x28159510 mask=3D0x0 code=
=3D0xc
I include my dmesg at the end of this mail, in the meantime, here are
the pcm sysctls that might be relevant:
root@lenny[/usr/home/anarcat]# sysctl hw.snd =
=20
hw.snd.targetirqrate: 32
hw.snd.report_soft_formats: 1
hw.snd.verbose: 1
hw.snd.unit: 0
hw.snd.maxautovchans: 2
hw.snd.pcm0.buffersize: 4096
hw.snd.pcm0.vchans: 1
I also tried:
root@lenny[/usr/home/anarcat]# sysctl hw.snd =20
hw.snd.targetirqrate: 32
hw.snd.report_soft_formats: 1
hw.snd.verbose: 1
hw.snd.unit: 0
hw.snd.maxautovchans: 0
hw.snd.pcm0.buffersize: 4096
hw.snd.pcm0.vchans: 0
I had odd crashes with xmms before, but *crashes*, no hangs. :)
I am available for testing and debugging, and I am eager to solve this
problem, since xmms is a must here, right now. I'd be forced to
downgrade to 4.7-stable (!) but I feel I'll have the same results. :)
A.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-RELEASE #2: Wed Feb 5 22:17:29 EST 2003
anarcat@lenny.anarcat.ath.cx:/usr/obj/usr/src/sys/LENNY
Preloaded elf kernel "/boot/kernel/kernel" at 0xc05e9000.
Preloaded elf module "/boot/kernel/linux.ko" at 0xc05e90a8.
Preloaded elf module "/boot/kernel/snd_emu10k1.ko" at 0xc05e9154.
Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc05e9204.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc05e92b0.
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 1008993741 Hz
CPU: AMD Duron(tm) Processor (1008.99-MHz 686-class CPU)
Origin =3D "AuthenticAMD" Id =3D 0x670 Stepping =3D 0
Features=3D0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,=
CMOV,PAT,PSE36,MMX,FXSR,SSE>
AMD Features=3D0xffffffffc0440000<RSVD,AMIE,DSP,3DNow!>
real memory =3D 1207877632 (1151 MB)
avail memory =3D 1167839232 (1113 MB)
Initializing GEOMetry subsystem
netsmb_dev: loaded
Pentium Pro MTRR support enabled
VESA: v2.0, 32768k memory, flags:0x1, mode table:0xc04c3e82 (1000022)
VESA: ATI RADEON III
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <ASUS A7V-133 > on motherboard
ACPI-0625: *** Info: GPE Block0 defined as GPE0 to GPE15
Using $PIR table, 9 entries at 0xc00f1750
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-fast" frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <VIA 82C8363 (Apollo KT133A) host to PCI bridge> mem 0xe6000000-0xe7f=
fffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
drm0: <ATI Radeon QY VE (AGP)> port 0xd800-0xd8ff mem 0xd7000000-0xd700ffff=
,0xd8000000-0xdfffffff irq 11 at device 0.0 on pci1
info: [drm] AGP at 0xe6000000 32MB
info: [drm] Initialized radeon 1.1.1 20010405 on minor 0
isab0: <PCI-ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA100 controller> port 0xb800-0xb80f at device 4.1 on=
pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xb400-0xb41f irq 9 at device 4.2 o=
n pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xb000-0xb01f irq 9 at device 4.3 o=
n pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
viapropm0: SMBus I/O base at 0xe800
viapropm0: <VIA VT82C686A Power Management Unit> port 0xe800-0xe80f at devi=
ce 4.4 on pci0
viapropm0: SMBus revision code 0x40
smb0: <SMBus generic I/O> on smbus0
vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0x9400-0x94ff mem 0xd6800000-0=
xd68000ff irq 9 at device 9.0 on pci0
vr0: Ethernet address: 00:50:ba:64:e3:6a
miibus0: <MII bus> on vr0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcm0: <Creative EMU10K1> port 0x9000-0x901f irq 5 at device 10.0 on pci0
atapci1: <Promise ATA100 controller> port 0x7000-0x703f,0x7400-0x7403,0x780=
0-0x7807,0x8000-0x8003,0x8400-0x8407 mem 0xd6000000-0xd601ffff irq 10 at de=
vice 17.0 on pci0
ata2: at 0x8400 on atapci1
ata3: at 0x7800 on atapci1
speaker0 port 0x61 on acpi0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x=
3f2-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model MouseMan+, device ID 0
orm0: <Option ROMs> at iomem 0xcc000-0xce7ff,0xc0000-0xcafff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
IPsec: Initialized Security Association Processing.
acpi_cpu: CPU throttling enabled, 16 steps from 100% to 6.2%
ad4: 38182MB <MAXTOR 4K040H2> [77578/16/63] at ata2-master UDMA100
MBREXT Slice 5 on ad4s2:
0000 00 01 01 c1 0b fe bf 42 3f 00 00 00 c3 a6 54 02 |.......B?.....T.|
[0] f:00 typ:11 s(CHS):193/1/1 e(CHS):66/254/191 s:63 l:39102147
0000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
cd0 at ata0 bus 0 target 0 lun 0
cd0: <PLEXTOR CD-R PX-W4012A 1.01> Removable CD-ROM SCSI-0 device=20
cd0: 33.000MB/s transfers
cd0: cd present [4294967146 x 2048 byte records]
cd1 at ata1 bus 0 target 0 lun 0
cd1: <LG CD-ROM CRD-8522B 2.02> Removable CD-ROM SCSI-0 device=20
cd1: 16.000MB/s transfers
cd1: Attempt to query device size failed: NOT READY, Medium not present
Mounting root from ufs:/dev/ad4s3a
Out of ktrace request objects.
--=20
Imagination is more important than knowledge
- Albert Einstein
--jI8keyz6grp/JLjh
Content-Type: application/pgp-signature
Content-Disposition: inline
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.1 (FreeBSD)
iD8DBQE+QnzvttcWHAnWiGcRAsXZAJ9jPOerl/TqyspKE37DFqE0Tm7NCwCglyXB
NqMjQqoFhkJd3q4fHTL5AbQ=
=tRe3
-----END PGP SIGNATURE-----
--jI8keyz6grp/JLjh--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030206151912.GA809>