Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 22 Jun 2007 10:18:57 -0700
From:      "Mark Stout" <mcs@vpm.com>
To:        "Brian A. Seklecki" <bseklecki@collaborativefusion.com>
Cc:        jackbarnett@gmail.com, illoai@gmail.com, Mark Stout <mark_stout04@yahoo.com>, freebsd-questions@freebsd.org
Subject:   RE: Upgrading to 6.2-RELEASE from 6.2-STABLE
Message-ID:  <DOEDIFELHLGPGLILFJKMCEAOCNAA.mcs@vpm.com>
In-Reply-To: <1182437459.68077.106.camel@soundwave.pgh.priv.collaborativefusion.com>

next in thread | previous in thread | raw e-mail | index | archive | help
The mountroot was failing to find and mount /dev/da0s1a.  The device
/dev/da0s1a is in /etc/fstab.  Going to the loader prompt and loading the
old kernel booted fine.  So the problem appears to lie somewhere in the boot
files or I added a option/device I probably should not have in the kernel.




> -----Original Message-----
> From: Brian A. Seklecki [mailto:bseklecki@collaborativefusion.com]
> Sent: Thursday, June 21, 2007 7:51 AM
> To: Mark Stout
> Cc: Mark Stout; jackbarnett@gmail.com; illoai@gmail.com;
> freebsd-questions@freebsd.org
> Subject: RE: Upgrading to 6.2-RELEASE from 6.2-STABLE
>
>
> not sure about fbsd but nbsd tries to resolve the BIOS drive ID (hex
> 0x80?) that the 1st stage boot loader loaded off of into a candidate to
> initialize the file system mount from.
>
> Then it goes after /etc/fstab, which has to agree .
>
> ~BAS
>
> On Wed, 2007-06-20 at 21:25 -0700, Mark Stout wrote:
> > Well I got the server up and running on the old kernel.  I redid the
> > buildworld and buildkernel.  I've held off for now on doing
> installworld and
> > installkernel until I get a better understanding of what caused me to go
> > into mountroot.  I use the "Escape to loader prompt" prompt to
> load the old
> > kernel.
> >
> > Does anyone know what causes one to load into a mountroot prompt?
> >
> >
> >
> > > -----Original Message-----
> > > From: Brian A. Seklecki [mailto:bseklecki@collaborativefusion.com]
> > > Sent: Wednesday, June 13, 2007 8:52 AM
> > > To: Mark Stout
> > > Cc: jackbarnett@gmail.com; illoai@gmail.com; mcs@vpm.com;
> > > freebsd-questions@freebsd.org
> > > Subject: Re: Upgrading to 6.2-RELEASE from 6.2-STABLE
> > >
> > >
> > > entering:
> > >
> > > mountroot> ufs:da0s1a
> > >
> > > ...doesn't work
> > >
> > > What does "?" command list.
> > >
> > > ~BAS
> > >
> > > On Tue, 2007-06-12 at 19:37 -0700, Mark Stout wrote:
> > > > I couldn't load da0s1a even though /dev/da0s1a is my root
> > > drive.  Manually load my old kernel from the prompt worked.
> > > >
> > > > I believe the mountroot is during the boot load.  I'm not
> > > anywhere near being able to do anything.
> > > >
> > > > I have no idea what the problem is.
> > > >
> > > >  [jackbarnett@gmail.com] wrote:
> > > >
> > > > no idea, but maybe:
> > > >     boot /boot/kernel/kernel
> > > > or
> > > >     boot /boot/kernel.old/kernel
> > > >
> > > > What is 'mountroot' - is that the boot loader or the kernel/system
> > > > giving you that?
> > > >
> > > > try mounting your root drive!
> > > >
> > > > do a `df -k`, anything already mounted?
> > > >
> > > > oh!  or try:
> > > >     fsck
> > > >
> > > > did it ask you to login?
> > > >
> > > >
> > > > Mark Stout wrote:
> > > > > I followed all the steps in the handbook as well as UPDATED
> > > and after a installworld and mergemaster its booting into
> > > 'mountroot>' and nothing I type mounts.  This is a production
> > > machine so I'm in dire need of assistence.
> > > > >
> > > > >  [illoai@gmail.com] wrote:
> > > > > On 11/06/07, Mark Stout <mcs@vpm.com> wrote:
> > > > >
> > > > >
> > > > >>> Following the tasks in Rebuilding "world" in the handbook
> > > > >>>
> > > http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/makeworl
> > > d.html I removed the
> > > > >>> /usr/obj directory and did a buildworld.  When tryinmg to
> > > compile the kernel its failing on
> > > > >>> unknown option "MD5".  Commenting that out it fails on the
> > > line above MD5,  options LKM.
> > > > >>>  What's happening here?  These two options papear in the
> > > LINT file.  I can't find anything
> > > > >>> that explains why this would happen.
> > > > >>>
> > > > >> A follow-up to my last email.  I copied GENERIC to RADIUS2 and
> > > > >> symlinked to /root/kernel.  Then added the various LINT options.
> > > > >>
> > > > >> I started commenting out what is failing when I try to
> compile a new
> > > > >> kernel.  All are from the LINT file.  Is MD5 a default
> that does not
> > > > >> need to be specifically added?  What about ICMP_BANDLIM?  And
> > > > >> support for IDE drives. Are these already handed elsewhere
> > > in GENERIC?
> > > > >>
> > > > >> # These all failed as unknown options:
> > > > >> unknown option "MD5"
> > > > >> unknown option "LKM"
> > > > >> unknown option "CD9660_ROOTDELAY"
> > > > >> unknown option "NSWAPDEV"
> > > > >> unknown option "TCP_COMPAT_42"
> > > > >> unknown option "ICMP_BANDLIM"  (found in Handbook in Chapter
> > > 14 Securing FreeBSD)
> > > > >>
> > > > >>
> > > > >> # Do not understand why these are fialing
> > > > >> config: Error: device "acd0" is unknown
> > > > >> config: Error: device "wfd0" is unknown
> > > > >> config: Error: device "wst0" is unknown
> > > > >>
> > > > >> # This failed as a syntax error
> > > > >> controller      wdc0    at isa? port "IO_WD1" bio irq 14
> > > > >>
> > > > >>
> > > > >
> > > > > Most of the above looks like old, deprecated
> > > > > stuff from 5.x and earlier (the "controller wdc0"
> > > > > line reminds me of 3.x or maybe NetBSD).
> > > > >
> > > > > IDE drive support is all handled by ata(4), all
> > > > > you should need for those in your kernel config
> > > > > is:
> > > > > device          ata
> > > > > device          atadisk
> > > > > device          atapicd
> > > > > (and obviously:)
> > > > > device eisa
> > > > > device pci
> > > > > Which are already part of GENERIC.
> > > > >
> > > > > /usr/src/sys/<arch>/conf/LINT doesn't exist in 6.x.
> > > > > Try looking at /usr/src/sys/<arch>/conf/NOTES
> > > > > and /usr/src/sys/conf/NOTES for knobs to twist
> > > > > and buttons to push.
> > > > >
> > > > >
> > > >
> > > >
> > > >
> > > >
> > > > _______________________________________________
> > > > freebsd-questions@freebsd.org mailing list
> > > > http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> > > > To unsubscribe, send any mail to
> > > "freebsd-questions-unsubscribe@freebsd.org"
> > > --
> > > Brian A. Seklecki <bseklecki@collaborativefusion.com>
> > > Collaborative Fusion, Inc.
> > >
> > >
> > >
> > >
> > > IMPORTANT: This message contains confidential information and is
> > > intended only for the individual named. If the reader of this
> > > message is not an intended recipient (or the individual
> > > responsible for the delivery of this message to an intended
> > > recipient), please be advised that any re-use, dissemination,
> > > distribution or copying of this message is prohibited.  Please
> > > notify the sender immediately by e-mail if you have received this
> > > e-mail by mistake and delete this e-mail from your system.
> > >
> > >
> >
> >
> >
> >
> >
> >
> >
> --
> Brian A. Seklecki <bseklecki@collaborativefusion.com>
> Collaborative Fusion, Inc.
>
>
>
>
> IMPORTANT: This message contains confidential information and is
> intended only for the individual named. If the reader of this
> message is not an intended recipient (or the individual
> responsible for the delivery of this message to an intended
> recipient), please be advised that any re-use, dissemination,
> distribution or copying of this message is prohibited.  Please
> notify the sender immediately by e-mail if you have received this
> e-mail by mistake and delete this e-mail from your system.
>
>




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?DOEDIFELHLGPGLILFJKMCEAOCNAA.mcs>