Date: Wed, 23 Jun 1999 07:33:35 +0200 From: Thierry Herbelot <herbelot@cybercable.fr> To: Greg Lehey <grog@lemis.com> Cc: "David E. Cross" <crossd@cs.rpi.edu>, freebsd-current@FreeBSD.ORG Subject: Re: vinum in -current Message-ID: <377071AF.4541C060@cybercable.fr> References: <grog@lemis.com> <199906230214.WAA26278@cs.rpi.edu> <19990623120730.H76907@freebie.lemis.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Hello Greg, If I may intrude in this discussion, I was wondering what is the correct syntax for naming vinum drives in rc.conf. I've got two drives merged and striped with vinum, but I'm not sure what to put in rc.conf vinum_conf : drive drive1 device /dev/wd1s1h drive drive2 device /dev/wd2s1h volume initial plex org striped 512b sd length 19806208b drive drive1 sd length 19806208b drive drive2 in rc.conf : Is the following correct : vinum_drives="/dev/wd1s1h /dev/wd2s1h" or should it be vinum_drives="/dev/wd1h /dev/wd2h" Big kudos for vinum TfH Greg Lehey wrote: > [SNIP] > I've also changed the names of the drives. With the old ones, you > won't be able to start the volume after a reboot. To quote vinum(8): > > drive name option > > Define a drive. The option must be: > > device devicename Specify the device on which the drive resides. > devicename must be the name of a disk compati- > bility partition, for example /dev/da1e or > /dev/wd3h, and it should be of type vinum. Do > not use the c partition, which is reserved for > the complete disk, and should be of type > unused. It is currently possible to create > drives on other disk devices, for example > /dev/da0s1 or /dev/da0s1e, but it will not be > possible to start these drives after a reboot. > > Greg > -- > See complete headers for address, home page and phone numbers > finger grog@lemis.com for PGP public key > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-current" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?377071AF.4541C060>