Date: Thu, 13 May 2021 07:47:56 -0700 From: Adrian Chadd <adrian.chadd@gmail.com> To: Daniel Cervus <DanieltheDeer@outlook.com> Cc: FreeBSD Wireless Mailing List <freebsd-wireless@freebsd.org> Subject: Re: Atheros AR9462 not working properly Message-ID: <CAJ-Vmo=umtf7=7BLVHAzuNXLMhi8Vv6D0=PDQAJ2-YUNmQ5tCg@mail.gmail.com> In-Reply-To: <SYBP282MB2383E8AC2B2FA63CC25531B2B8519@SYBP282MB2383.AUSP282.PROD.OUTLOOK.COM> References: <SYBP282MB238314B9C2FE1D8399BACE60B8549@SYBP282MB2383.AUSP282.PROD.OUTLOOK.COM> <SYBP282MB2383E8AC2B2FA63CC25531B2B8519@SYBP282MB2383.AUSP282.PROD.OUTLOOK.COM>
next in thread | previous in thread | raw e-mail | index | archive | help
hi! (a) it'll say 802.11g but then the channel should say HT/20 or HT/40. what's the actual output of ifconfig wlan0 ? (b) yeah, that's a bsdconfig bug :-) (c) that's fine, it's likely some crazy stuff like needing to do some packet IO during a scan; it's printed like that in case things are also hanging (d) that's fine, I gotta figure out what's up with that but it's harmless -a On Thu, 13 May 2021 at 06:25, Daniel Cervus <DanieltheDeer@outlook.com> wro= te: > > Hello, > > My laptop is using Atheros AR9462 (Dell 1901) wireless card, which is sup= posed to be supported by the ath driver, but in FreeBSD 12.2-RELEASE-p6, it= doesn=E2=80=99t work correctly. > > Although it supports 802.11n, only 802.11g network was detected. > bsdconfig displays as =E2=80=9Cunknown network interface type=E2=80=9D, b= ut during installation, it was correctly recognized. > Occasionally there=E2=80=99s =E2=80=9Cath0: ath_edma_recv_tasklet: sc_inr= eset_cnt > 0; skipping=E2=80=9D displayed. > I can connect to network in 802.11g mode, but not steadily, occasionally = =E2=80=9CFailed to add supported operating classes IE=E2=80=9D was displaye= d. > > Is that normal? > _______________________________________________ > freebsd-wireless@freebsd.org mailing list > https://lists.freebsd.org/mailman/listinfo/freebsd-wireless > To unsubscribe, send any mail to "freebsd-wireless-unsubscribe@freebsd.or= g"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAJ-Vmo=umtf7=7BLVHAzuNXLMhi8Vv6D0=PDQAJ2-YUNmQ5tCg>