Date: Fri, 21 Jul 2000 17:02:52 -0400 (EDT) From: Carl Mascott <cmascott@thecia.net> To: cmascott@thecia.net, duhring@charter.net, freebsd-stable@freebsd.org Subject: Re: Can't disable adv0 device in 4.0-STABLE-20000718 GENERIC Message-ID: <200007212102.RAA00822@callisto.local> In-Reply-To: <00072115081700.00957@dave.uhring.com>
next in thread | previous in thread | raw e-mail | index | archive | help
David Uhring <duhring@charter.net> wrote: > On Fri, 21 Jul 2000, Carl Mascott wrote: > > FreeBSD 4.0-STABLE-20000718 > > > > I just tried booting the boot floppies (that's all I have) on > > a machine with a SoundBlaster 16 at port 220H. I went into > > device config and disabled the adv0 device (Advansys SCSI). > > I answered "y" to the "save settings" prompt. Yet I'm still > > getting the following during hardware probing: > > > > adv1: Invalid baseport of 0x220 specified. Nearest valid baseport > > is 0x320. Failing probe. > > > > Right after this, I get: > > > > unknown0: <Audio> at port 0x220-0x22f, [ ... ] > > > > which looks correct. > > > > I also get a couple more failed adv1 probes which I didn't > > write down. The one shown is the first one. > > > > It looks like the adv0 device cannot be disabled, and its > > hardware probe thinks the SB16 is an Advansys HBA. > > > > P.S. I'm not subscribed to this list. > > > Can't be a GENERIC kernel, GENERIC has no sound support. Remove any existing > drivers for sound and insert: > > device pcm > device sbc0 at isa? port 0x220 irq 5 drq 1 flags 0x15 > > Recompile and install the kernel. Reboot and note whether sbc0 or sbc1 shows > up in dmesg. After boot, cd /dev & ./MAKEDEV snd0 or ./MAKEDEV snd1 as > appropriate. FreeBSD properly supports the true SB 16. Maybe you should also > delete (rm) the offending /dev/adv1. I guess I wasn't clear in my original message, because this is the second reply I've gotten telling me how to fix my sound problem. I wasn't reporting a sound problem: I was reporting a problem with the adv0 driver (see the sentence "It looks like..."). To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200007212102.RAA00822>