Date: Mon, 23 Oct 2000 22:17:06 +0200 From: "Ron Klinkien" <ron@zappa.demon.nl> To: <current@freebsd.org> Subject: My Cardbus and Xircom Realport Ethernet II 10/100 experience... Message-ID: <006d01c03d2e$36cf0220$0304a8c0@demon.nl>
next in thread | raw e-mail | index | archive | help
I run FreeBSD 5.0 on my Compaq Presario 1246 laptop
including an Xircom Realport Ethernet II 10/100 cardbus card.
My kernel includes:
device cardbus
device pccbb
device xe
dmesg reports:
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #0: Mon Oct 23 21:31:52 CEST 2000
root@goblin.demon.nl:/usr/src/sys/compile/GOBLIN
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 398525604 Hz
CPU: AMD-K6(tm) 3D processor (398.53-MHz 586-class CPU)
Origin = "AuthenticAMD" Id = 0x58c Stepping = 12
Features=0x8021bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX>
AMD Features=0x80000800<SYSCALL,3DNow!>
real memory = 92209152 (90048K bytes)
avail memory = 86573056 (84544K bytes)
Preloaded elf kernel "kernel" at 0xc030e000.
K6-family MTRR support enabled (2 registers)
VESA: v2.0, 8192k memory, flags:0x0, mode table:0xc00c70f8 (c00070f8)
VESA: Copyright 1998 TRIDENT MICROSYSTEMS INC.
Using $PIR table, 5 entries at 0xc00fdf90
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pcib1: <PCI to PCI bridge (vendor=1106 device=8501)> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <Trident model 8420 VGA-compatible display device> at 0.0 irq 9
isab0: <VIA 82C686 PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA66 controller> port 0x1820-0x182f at device 7.1 on
pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0x1800-0x181f irq 11 at device 7.2
on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ums0: Logitech USB Mouse, rev 1.10/4.00, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
isab1: <PCI to ISA bridge (vendor=1106 device=3057)> at device 7.4 on pci0
pcm0: <VIA VT82C686A AC'97 Audio> port
0x1830-0x1833,0x1834-0x1837,0x1000-0x10ff irq 11 at device 7.5 on pci0
pci0: <unknown card> (vendor=0x11c1, dev=0x0449) at 9.0 irq 9
pccbb0: <TI1211 PCI-CardBus Bridge> at device 10.0 on pci0
pccbb0: PCI Memory allocated: 18020000
pci_cfgintr: 0:10:A routed to irq 9
cardbus0: <Cardbus bus (newcard)> on pccbb0
pccbb0: Cannot attach pccard bus!
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
unknown: <PNP0303> can't assign resources
unknown: <PNP0501> can't assign resources
unknown: <PNP0400> can't assign resources
unknown: <PNP0700> can't assign resources
ad0: 4126MB <TOSHIBA MK4313MAT> [8944/15/63] at ata0-master UDMA33
acd0: CDROM <TOSHIBA CD-ROM XM-7002B> at ata1-master using PIO4
Mounting root from ufs:/dev/ad0s3a
pccbb0: card inserted: event=0x00000000, state=30000820
pccbb0: pccbb_power: CARD_VCC_3V and CARD_VPP_UC [1]
cardbus0: reading CIS data from ROM
Product version: 5.0
Product name: Xircom | CardBus Ethernet II 10/100 | CBEII-10/100 | 1.03 |
TUPLE: Unknown(0x88) [4]: 5e a9 eb 00
TUPLE: Unknown(0x8a) [12]: 39 30 30 31 4f 42 45 42 41 39 35 45
TUPLE: Unknown(0x8b) [4]: 01 00 00 00
Manufacturer ID: 0501030181
TUPLE: DATE [4]: 70 4b 23 28
Functions: Network Adaptor, Multi-Functioned
Function Extension: 04060010a4eba95e
Function Extension: 0102
Function Extension: 0280969800
Function Extension: 0200e1f505
Function Extension: 0301
Function Extension: 0303
Function Extension: 0501
TUPLE: DEVICE_OC [4]: 02 4f 02 ff
cardbus0: Opening BAR: type=MEM, bar=10, len=0080
cardbus0: Opening BAR: type=MEM, bar=14, len=0080
cardbus0: Opening BAR: type=MEM, bar=18, len=0100
cardbus0: Opening BAR: type=MEM, bar=28, len=0400
TUPLE: CONFIG_CB [7]: 03 02 03 01 00 00 ff
TUPLE: CFTABLE_ENTRY_CB [8]: 41 b0 b0 bc 8e 0e fb 04
TUPLE: CFTABLE_ENTRY_CB [9]: 02 b8 02 b0 bc 8e 1c fb 04
TUPLE: NO_LINK [0]:
cardbus0: <unknown card> (vendor=0x115d, dev=0x0003) at 0.0 irq 0
pccbb0: card activation failed
According to files in /usr/src/sys/dev/xe/* the card is supported by the xe
driver.
What to do to get this card working? I have the feeling I got real close...
Regards,
Ron.
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?006d01c03d2e$36cf0220$0304a8c0>