Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 17 Oct 2003 01:39:48 +0600
From:      "maxim" <m.maslennikov@uralcom.com>
To:        freebsd-questions@FreeBSD.ORG
Subject:   PNP ISA Modem Motorola Premier 33.6 Internal can't install
Message-ID:  <002f01c3941d$42a1d390$4a1f320a@MMaslennikov>

next in thread | raw e-mail | index | archive | help
Hello,

I have PNP ISA modem, programe pnpinfo write out:
Checking for Plug-n-Play devices...

Card assigned CSN #1
Vendor ID MOT1580 (0x8015f435), Serial Number 0x19647968
PnP Version 1.0, Vendor Version 0
Device Description: Motorola Premier 33.6 Internal

Logical Device ID: MOT1580 0x8015f435 #0
        Device supports I/O Range Check
TAG Start DF
    I/O Range 0x3e8 .. 0x3e8, alignment 0x8, len 0x8
        [not 16-bit addr]
    IRQ: 3 4 5 7  - only one type (true/edge)
TAG Start DF
    I/O Range 0x2e8 .. 0x2e8, alignment 0x8, len 0x8
        [not 16-bit addr]
    IRQ: 3 4 5 7  - only one type (true/edge)
TAG Start DF
    I/O Range 0x3f8 .. 0x3f8, alignment 0x8, len 0x8
        [not 16-bit addr]
    IRQ: 4  - only one type (true/edge)
TAG Start DF
    I/O Range 0x2f8 .. 0x2f8, alignment 0x8, len 0x8
        [not 16-bit addr]
    IRQ: 3  - only one type (true/edge)
TAG Start DF
    I/O Range 0x2e8 .. 0x2e8, alignment 0x8, len 0x8
        [not 16-bit addr]
    IRQ: 10 11 12 15  - only one type (true/edge)
TAG Start DF
    I/O Range 0x3e8 .. 0x3e8, alignment 0x8, len 0x8
        [not 16-bit addr]
    IRQ: 10 11 12 15  - only one type (true/edge)
TAG Start DF
    I/O Range 0x0 .. 0x3f8, alignment 0x8, len 0x8
        [not 16-bit addr]
    IRQ: 3 4 5 7  - only one type (true/edge)
TAG Start DF
    I/O Range 0x0 .. 0x3f8, alignment 0x8, len 0x8
        [not 16-bit addr]
    IRQ: 10 11 12 15  - only one type (true/edge)
TAG End DF
End Tag

Successfully got 28 resources, 1 logical fdevs
-- card select # 0x0001

CSN MOT1580 (0x8015f435), Serial Number 0x19647968

Logical device #0
IO:  0x03e8 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
IRQ 3 0
DMA 4 0
IO range check 0x00 activate 0x01

But I can't see new sio device.
How can I solve the problem?
How does FreeBSD configurate PNP isa devices?

Kind Regards,
Maxim Maslennikov.



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?002f01c3941d$42a1d390$4a1f320a>