Date: Sat, 13 Feb 1999 11:01:04 -0500 From: Vince Gonzalez <vince@nycrc.net> To: freebsd-scsi@FreeBSD.ORG Subject: NCR 810 and Sony Spressa 960 Message-ID: <19990213110104.A475@nycrc.net>
next in thread | raw e-mail | index | archive | help
I've got an NCR 810 scsi card and a Sony Spressa 960.
I'm having problems getting this combination to work. I'm running 3.0-RELEASE,
with a generic kernel. The boot gets to the line
ncr0: SCSI phase error fixup: CCB already dequeued (0xf0862600)
and sits there a while. Eventually, the timeout messages start, and a long while
later (don't know exactly how long, I left it booting overnight) it
gives up and finishes the boot. This whole problem is strange, because this
stuff works fine under Linux and Windows 98 (on the same machine). Clearly, BSD
does not care for my CD-R. Is this simply a matter of installing a newer
kernel?
Thanks for any help!
Here's my dmesg output:
Copyright (c) 1992-1998 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 3.0-RELEASE #0: Sat Oct 17 17:45:06 GMT 1998
jkh@kickme.freebsd.org:/usr/src/sys/compile/GENERIC
Timecounter "i8254" frequency 1193182 Hz cost 3191 ns
CPU: Pentium II (quarter-micron) (300.68-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x652 Stepping=2
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,<b24>>
real memory = 67108864 (65536K bytes)
avail memory = 62488576 (61024K bytes)
Probing for devices on PCI bus 0:
chip0: <Intel 82443BX host to PCI bridge> rev 0x03 on pci0.0.0
chip1: <Intel 82443BX host to AGP bridge> rev 0x03 on pci0.1.0
chip2: <Intel 82371AB PCI to ISA bridge> rev 0x02 on pci0.7.0
ide_pci0: <Intel PIIX4 Bus-master IDE controller> rev 0x01 on pci0.7.1
chip3: <Intel 82371AB USB host controller> rev 0x01 int d irq 255 on pci0.7.2
chip4: <Intel 82371AB Power management controller> rev 0x02 on pci0.7.3
fxp0: <Intel EtherExpress Pro 10/100B Ethernet> rev 0x05 int a irq 12 on pci0.11.0
fxp0: Ethernet address 00:a0:c9:e8:1d:51
ncr0: <ncr 53c810 fast10 scsi> rev 0x02 int a irq 10 on pci0.13.0
Probing for devices on PCI bus 1:
vga0: <VGA-compatible display device> rev 0x21 int a irq 11 on pci1.0.0
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
ed0 not found at 0x280
fe0 not found at 0x300
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
psm0 not found at 0x60
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): <IBM-DTTA-351010>
wd0: 9671MB (19807200 sectors), 19650 cyls, 16 heads, 63 S/T, 512 B/S
wdc0: unit 1 (wd1): <Maxtor 85120A8>
wd1: 4884MB (10003392 sectors), 9924 cyls, 16 heads, 63 S/T, 512 B/S
wdc1 at 0x170-0x177 irq 15 on isa
wdc1: unit 0 (atapi): <TOSHIBA CD-ROM XM-5702B/2826>, removable, accel, ovlap, dma, iordy
wcd0: 2067Kb/sec, 256Kb cache, audio play, 255 volume levels, ejectable tray
wcd0: 120mm data disc loaded, unlocked
wt0 not found at 0x300
mcd0 not found at 0x300
matcdc0 not found at 0x230
scd0 not found at 0x230
ie0: unknown board_id: f000
ie0 not found at 0x300
ep0 not found at 0x300
ex0 not found
le0 not found at 0x300
lnc0 not found at 0x280
ze0 not found at 0x300
zp0 not found at 0x300
cs0 not found at 0x300
adv0 not found at 0x330
bt0 not found at 0x134
aha0 not found at 0x134
npx0 on motherboard
npx0: INT 16 interface
Waiting 15 seconds for SCSI devices to settle
ncr0: SCSI phase error fixup: CCB already dequeued (0xf0862600)
ncr0: timeout nccb=0xf0862600 (skip)
ncr0: timeout nccb=0xf0862600 (skip)
ncr0: timeout nccb=0xf0862600 (skip)
ncr0: timeout nccb=0xf0862600 (skip)
ncr0: timeout nccb=0xf0862a00 (skip)
ncr0: timeout nccb=0xf0862a00 (skip)
ncr0: timeout nccb=0xf0862a00 (skip)
ncr0: timeout nccb=0xf0862a00 (skip)
ncr0: timeout nccb=0xf0862a00 (skip)
ncr0: timeout nccb=0xf0862e00 (skip)
ncr0: timeout nccb=0xf0862e00 (skip)
ncr0: timeout nccb=0xf0862e00 (skip)
ncr0: timeout nccb=0xf0862e00 (skip)
ncr0: timeout nccb=0xf0862e00 (skip)
ncr0: timeout nccb=0xf0860200 (skip)
ncr0: timeout nccb=0xf0860200 (skip)
ncr0: timeout nccb=0xf0860200 (skip)
ncr0: timeout nccb=0xf0860200 (skip)
ncr0: timeout nccb=0xf0860200 (skip)
ncr0: timeout nccb=0xf0860600 (skip)
ncr0: timeout nccb=0xf0860600 (skip)
ncr0: timeout nccb=0xf0860600 (skip)
ncr0: timeout nccb=0xf0860600 (skip)
ncr0: timeout nccb=0xf0860600 (skip)
ncr0: timeout nccb=0xf0860e00 (skip)
ncr0: timeout nccb=0xf0860e00 (skip)
ncr0: timeout nccb=0xf0860e00 (skip)
ncr0: timeout nccb=0xf0860e00 (skip)
ncr0: timeout nccb=0xf0860e00 (skip)
ncr0: timeout nccb=0xf0865400 (skip)
ncr0: timeout nccb=0xf0865400 (skip)
ncr0: timeout nccb=0xf0865400 (skip)
ncr0: timeout nccb=0xf0865400 (skip)
ncr0: timeout nccb=0xf0865400 (skip)
changing root device to wd1s1a
ncr0: timeout nccb=0xf0862000 (skip)
ncr0: timeout nccb=0xf0862000 (skip)
(cd0:ncr0:0:1:0): got CAM status 0x4b
(cd0:ncr0:0:1:0): fatal error, failed to attach to device(cd0:ncr0:0:1:0): removing device entry
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-scsi" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19990213110104.A475>