Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 9 Nov 2004 16:30:18 +0100
From:      messmate <messmate@free.fr>
To:        freebsd-questions@freebsd.org
Subject:   Re: Upgrading 5.3-Beta1 to 5.3-RELEASE
Message-ID:  <20041109163018.6d238202@eric.placeverte.home>
In-Reply-To: <20041109013813.GC576@internode.com.au>
References:  <3E7680C2-31E9-11D9-BD44-000393934006@npc-usa.com> <20041109013813.GC576@internode.com.au>

next in thread | previous in thread | raw e-mail | index | archive | help
On Tue, 9 Nov 2004 12:08:14 +1030
Adam Smith <adam@internode.com.au> wrote:

>On Mon, Nov 08, 2004 at 04:49:42PM -0800, Curtis Vaughan said:
>> Just want to be sure that I do the right thing.
>> 
>> So, my version at present is 5.3-BETA1 and I want to install 5.3.
>> I supposed I could just install 5.3 over my current version, but 
>> wouldn't an upgrade work just as well?
>> 
>> Finally, want to make sure I have the procedure right:
>> 
>>  ??? go to: /usr/local/etc/cvsup
>>  ??? issue the following command: /usr/local/bin/cvsup -g -L 2 
>> stable-supfile
>>  ??? once finished, then go to: /usr/src
>>  ??? enter the commands:
>
>There are some nicer ways to do this.  Check
>http://www.bugman.cx/cvsup/ for my make.conf, release-supfile and
>ports-supfile for examples.  You can copy these three files into your
>/etc directory, and using the make.conf file, you can now just 'cd
>/usr/src' and then issue a 'make update'.  Your make.conf flags will
>tell CVSup what to do.
>
>Make sure you edit the three files carefully, as you'll want to specify
>a local CVSup server *and* you'll want to make sure the make.conf flags
>are correct.  Remember that whenever you run 'make', the commands in
>make.conf are passed as options to the make command.  That means if you
>have'WITHOUT_X11=true' in your make.conf file, that will get passed to
>every single port build you perform.
>
>If you already have a make.conf file you might want to just copy out
>the MASTER_ lines and all of the SUP lines (including PORTSSUPFILE) and
>put them into your own make.conf.
>
>> make buildworld KERNCONF=yourkernelname (for name, look to config
>file > found in /usr/src/sys/i386/conf/)
>
>Just 'make buildworld' is fine here.  You don't need to specify a
>kernel name when issuing a buildworld.
>
>>  make buildkernel KERNCONF=yourkernelname (look to / )
>>  make installkernel KERNCONF=yourkernelname
>>  reboot
>
>You can do a 'make buildworld' and a 'make buildkernel
>KERNCONF=yourkernel' while you're booted into multi-user (ie normal)
>FreeBSD.  You can even install the kernel from here before rebooting,
>but after you've built the two, you should switch to single user mode
>and then run:
>
>make installkernel KERNCONF=yourkernelname
>make installworld
>
>Then follow with:
>
>> mergemaster -p ?
>
>*snip*
>
>>  reboot
>
>So basically:
>
> o  update from cvs
>      # cd /usr/src
>      # make update
> o  build world/kernel in your normal or single-user mode
>      # cd /usr/obj
>      # rm -rf *
>      # cd /usr/src
>      # make buildworld
>      # make buildkernel KERNCONF=YOURKERNEL
> o  install kernel/world in single user mode
>      # reboot [ Choose single User Mode ]
>      # cd /usr/src
>      # make installkernel KERNCONF=YOURKERNEL
>      # make installworld
> o  run mergemaster -p
>      # mergemaster -p
> o  reboot 
>      # reboot
>
>It's fairly straight-forward once you get the gist :)
>
>-- 
>Adam Smith
Hummm, after that all i reconsider if i did the rigth thing ??
I upgrade from 5.3-beta7 to 5.3-RELEASE as follows :
-Changed in /stand/sysinstall.. Options: 5.3-7 to 5.3-RELEASE
-Then did simply an upgrade.
And all was downloaded and installed, but not xorg where xorg-librairies
won't install :(
A uname -a chows effectively 5.3-RELEASE .
Anybody can confirm this method of upgrading ?
mess-mate



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20041109163018.6d238202>