Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 25 Apr 2003 05:08:11 -0500
From:      Larry Rosenman <ler@lerctr.org>
To:        current@freebsd.org
Subject:   5.0-CURRENT, still with the Integer Divide Exception
Message-ID:  <10230000.1051265291@lerlaptop.lerctr.org>

next in thread | raw e-mail | index | archive | help
I just tried again with 5-CURRENT, and still get a Integer Divide 
Exception.

I tried adding Nate's 20030328 ACPI code, and it didn't change things.

The DB> stuff tells me it's at cbb_intr+22.

Warner,

   Does this give you any hints?

   Also, when I have the card in slot0, it usually does NOT initialize, but 
if it's in
   Slot 1, it does.

Dmesg:
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #6: Fri Apr 25 04:21:28 CDT 2003
    ler@lerlaptop:/usr/obj/usr/src/sys/LERLAPTOP
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0588000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc05880a8.
Timecounter "i8254"  frequency 1193182 Hz
Timecounter "TSC"  frequency 1129576034 Hz
CPU: Intel(R) Pentium(R) III Mobile CPU      1133MHz (1129.58-MHz 686-class 
CPU)
  Origin = "GenuineIntel"  Id = 0x6b1  Stepping = 1
 
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV
,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 527958016 (503 MB)
avail memory = 506650624 (483 MB)
Pentium Pro MTRR support enabled
ACPI version 20030328 initializing
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <FUJ    ERG     > on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 9 entries at 0xc00fdf30
AcpiOsDerivePciId: bus 0 dev 31 func 0
AcpiOsDerivePciId: bus 1 dev 10 func 0
AcpiOsDerivePciId: bus 1 dev 10 func 1
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-fast"  frequency 3579545 Hz
AcpiOsDerivePciId: bus 0 dev 0 func 0
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xfc08-0xfc0b on acpi0
acpi_cpu0: <CPU> port 0x530-0x537 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82830M (830M GMCH) SVGA controller> mem 
0xe0000000-0xe007ffff,0xe8000000-0xefffffff irq 11 at device 2.0 on pci0
agp0: detected 8060k stolen memory
agp0: aperture size is 128M
pci0: <display> at device 2.1 (no driver attached)
uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0x18c0-0x18df 
irq 11 at device 29.0 on pci0
usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0x18e0-0x18ff 
irq 11 at device 29.1 on pci0
usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib1
cbb0: <TI1520 PCI-CardBus Bridge> irq 11 at device 10.0 on pci1
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb1: <TI1520 PCI-CardBus Bridge> irq 11 at device 10.1 on pci1
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
rl0: <RealTek 8139 10/100BaseTX> port 0x2000-0x20ff mem 
0xe0200800-0xe02008ff irq 11 at device 13.0 on pci1
rl0: Realtek 8139B detected. Warning, this may be unstable in autoselect 
mode
rl0: Ethernet address: 00:e0:00:7e:d0:45
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fwohci0: vendor=10cf, dev=2010
fwohci0: <1394 Open Host Controller Interface> mem 0xe0200000-0xe02007ff 
irq 11 at device 14.0 on pci1
fwohci0: PCI bus latency is 64.
fwohci0: Could not map memory
device_probe_and_attach: fwohci0 attach returned 6
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 UDMA100 controller> port 
0x1c20-0x1c2f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 mem 
0xe0100000-0xe01003ff at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
ichsmb0: <Intel 82801CA (ICH3) SMBus controller> port 0x1c00-0x1c1f irq 11 
at device 31.3 on pci0
smbus0: <System Management Bus> on ichsmb0
smb0: <SMBus generic I/O> on smbus0
pcm0: <Intel 82801CA (ICH3)> port 0x1880-0x18bf,0x1000-0x10ff irq 11 at 
device 31.5 on pci0
pcm0: <SigmaTel STAC9756/57 AC97 Codec>
pci0: <simple comms> at device 31.6 (no driver attached)
acpi_button0: <Power Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_acad0: <AC adapter> on acpi0
acpi_cmbat0: <Control method Battery> on acpi0
speaker0 port 0x61 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
acpi_ec0: <embedded controller> port 0x66,0x62 on acpi0
acpi_ec0: can't install GPE handler for \\_SB_.PCI0.LPC0.EC__ - 
AE_BAD_PARAMETER
device_probe_and_attach: acpi_ec0 attach returned 6
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2e8-0x2ef irq 3 on acpi0
sio1: type 16550A
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 1 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/15 bytes threshold
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 
0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
acpi_ec0: <embedded controller> port 0x66,0x62 on acpi0
acpi_ec0: can't install GPE handler for \\_SB_.PCI0.LPC0.EC__ - 
AE_BAD_PARAMETER
device_probe_and_attach: acpi_ec0 attach returned 6
orm0: <Option ROMs> at iomem 0xcc800-0xcefff,0xc0000-0xcc7ff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
wi0: <The Linksys Group, Inc. Instant Wireless Network PC Card> at port 
0x100-0x13f irq 11 function 0 config 1 on pccard1
wi0: 802.11 address: 00:06:25:18:1a:37
wi0: using RF:PRISM3(PCMCIA)
wi0: Intersil Firmware: Primary (1.1.0), Station (1.4.2)
wi0: supported rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
ad0: 57231MB <FUJITSU MHS2060AT> [116280/16/63] at ata0-master UDMA100
acd0: CD-RW <SONY CD-RW CRX800E> at ata1-master PIO4
cd0 at ata1 bus 0 target 0 lun 0
cd0: <SONY CD-RW  CRX800E 1.1c> Removable CD-ROM SCSI-0 device
cd0: 16.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
Mounting root from ufs:/dev/ad0s2a
WARNING: / was not properly dismounted
WARNING: /tmp was not properly dismounted
/tmp: mount pending error: blocks 0 files 1
/tmp: superblock summary recomputed
WARNING: /usr was not properly dismounted
WARNING: /var was not properly dismounted
WARNING: /shared was not properly dismounted
/shared: superblock summary recomputed
WARNING: /stable/var was not properly dismounted
/stable/var: superblock summary recomputed
WARNING: /stable/usr was not properly dismounted
/stable/usr: superblock summary recomputed
WARNING: /stable/tmp was not properly dismounted
/stable/tmp: superblock summary recomputed


-- 
Larry Rosenman                     http://www.lerctr.org/~ler
Phone: +1 972-414-9812                 E-Mail: ler@lerctr.org
US Mail: 1905 Steamboat Springs Drive, Garland, TX 75044-6749





Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?10230000.1051265291>