Date: Thu, 3 Dec 2015 08:06:11 +0000 (UTC) From: Andrew Rybchenko <arybchik@FreeBSD.org> To: src-committers@freebsd.org, svn-src-all@freebsd.org, svn-src-head@freebsd.org Subject: svn commit: r291682 - head/sys/dev/sfxge/common Message-ID: <201512030806.tB386BX3012498@repo.freebsd.org>
next in thread | raw e-mail | index | archive | help
Author: arybchik Date: Thu Dec 3 08:06:10 2015 New Revision: 291682 URL: https://svnweb.freebsd.org/changeset/base/291682 Log: sfxge: regenerate MCDI headers Sponsored by: Solarflare Communications, Inc. MFC after: 2 days Modified: head/sys/dev/sfxge/common/efx_regs_mcdi.h Modified: head/sys/dev/sfxge/common/efx_regs_mcdi.h ============================================================================== --- head/sys/dev/sfxge/common/efx_regs_mcdi.h Thu Dec 3 07:42:00 2015 (r291681) +++ head/sys/dev/sfxge/common/efx_regs_mcdi.h Thu Dec 3 08:06:10 2015 (r291682) @@ -4451,8 +4451,12 @@ /* MC_CMD_DRV_ATTACH_IN msgrequest */ #define MC_CMD_DRV_ATTACH_IN_LEN 12 -/* new state (0=detached, 1=attached) to set if UPDATE=1 */ +/* new state to set if UPDATE=1 */ #define MC_CMD_DRV_ATTACH_IN_NEW_STATE_OFST 0 +#define MC_CMD_DRV_ATTACH_LBN 0 +#define MC_CMD_DRV_ATTACH_WIDTH 1 +#define MC_CMD_DRV_PREBOOT_LBN 1 +#define MC_CMD_DRV_PREBOOT_WIDTH 1 /* 1 to set new state, or 0 to just report the existing state */ #define MC_CMD_DRV_ATTACH_IN_UPDATE_OFST 4 /* preferred datapath firmware (for Huntington; ignored for Siena) */ @@ -4474,12 +4478,12 @@ /* MC_CMD_DRV_ATTACH_OUT msgresponse */ #define MC_CMD_DRV_ATTACH_OUT_LEN 4 -/* previous or existing state (0=detached, 1=attached) */ +/* previous or existing state, see the bitmask at NEW_STATE */ #define MC_CMD_DRV_ATTACH_OUT_OLD_STATE_OFST 0 /* MC_CMD_DRV_ATTACH_EXT_OUT msgresponse */ #define MC_CMD_DRV_ATTACH_EXT_OUT_LEN 8 -/* previous or existing state (0=detached, 1=attached) */ +/* previous or existing state, see the bitmask at NEW_STATE */ #define MC_CMD_DRV_ATTACH_EXT_OUT_OLD_STATE_OFST 0 /* Flags associated with this function */ #define MC_CMD_DRV_ATTACH_EXT_OUT_FUNC_FLAGS_OFST 4 @@ -4491,6 +4495,10 @@ #define MC_CMD_DRV_ATTACH_EXT_OUT_FLAG_LINKCTRL 0x1 /* enum: The function can perform privileged operations */ #define MC_CMD_DRV_ATTACH_EXT_OUT_FLAG_TRUSTED 0x2 +/* enum: The function does not have an active port associated with it. The port + * refers to the Sorrento external FPGA port. + */ +#define MC_CMD_DRV_ATTACH_EXT_OUT_FLAG_NO_ACTIVE_PORT 0x3 /***********************************/ @@ -5230,6 +5238,55 @@ #define MC_CMD_SET_MAC_IN_FLAG_INCLUDE_FCS_LBN 0 #define MC_CMD_SET_MAC_IN_FLAG_INCLUDE_FCS_WIDTH 1 +/* MC_CMD_SET_MAC_EXT_IN msgrequest */ +#define MC_CMD_SET_MAC_EXT_IN_LEN 32 +/* The MTU is the MTU programmed directly into the XMAC/GMAC (inclusive of + * EtherII, VLAN, bug16011 padding). + */ +#define MC_CMD_SET_MAC_EXT_IN_MTU_OFST 0 +#define MC_CMD_SET_MAC_EXT_IN_DRAIN_OFST 4 +#define MC_CMD_SET_MAC_EXT_IN_ADDR_OFST 8 +#define MC_CMD_SET_MAC_EXT_IN_ADDR_LEN 8 +#define MC_CMD_SET_MAC_EXT_IN_ADDR_LO_OFST 8 +#define MC_CMD_SET_MAC_EXT_IN_ADDR_HI_OFST 12 +#define MC_CMD_SET_MAC_EXT_IN_REJECT_OFST 16 +#define MC_CMD_SET_MAC_EXT_IN_REJECT_UNCST_LBN 0 +#define MC_CMD_SET_MAC_EXT_IN_REJECT_UNCST_WIDTH 1 +#define MC_CMD_SET_MAC_EXT_IN_REJECT_BRDCST_LBN 1 +#define MC_CMD_SET_MAC_EXT_IN_REJECT_BRDCST_WIDTH 1 +#define MC_CMD_SET_MAC_EXT_IN_FCNTL_OFST 20 +/* enum: Flow control is off. */ +/* MC_CMD_FCNTL_OFF 0x0 */ +/* enum: Respond to flow control. */ +/* MC_CMD_FCNTL_RESPOND 0x1 */ +/* enum: Respond to and Issue flow control. */ +/* MC_CMD_FCNTL_BIDIR 0x2 */ +/* enum: Auto neg flow control. */ +/* MC_CMD_FCNTL_AUTO 0x3 */ +/* enum: Priority flow control (eftest builds only). */ +/* MC_CMD_FCNTL_QBB 0x4 */ +/* enum: Issue flow control. */ +/* MC_CMD_FCNTL_GENERATE 0x5 */ +#define MC_CMD_SET_MAC_EXT_IN_FLAGS_OFST 24 +#define MC_CMD_SET_MAC_EXT_IN_FLAG_INCLUDE_FCS_LBN 0 +#define MC_CMD_SET_MAC_EXT_IN_FLAG_INCLUDE_FCS_WIDTH 1 +/* Select which parameters to configure. A parameter will only be modified if + * the corresponding control flag is set. If SET_MAC_ENHANCED is not set in + * capabilities then this field is ignored (and all flags are assumed to be + * set). + */ +#define MC_CMD_SET_MAC_EXT_IN_CONTROL_OFST 28 +#define MC_CMD_SET_MAC_EXT_IN_CFG_MTU_LBN 0 +#define MC_CMD_SET_MAC_EXT_IN_CFG_MTU_WIDTH 1 +#define MC_CMD_SET_MAC_EXT_IN_CFG_DRAIN_LBN 1 +#define MC_CMD_SET_MAC_EXT_IN_CFG_DRAIN_WIDTH 1 +#define MC_CMD_SET_MAC_EXT_IN_CFG_REJECT_LBN 2 +#define MC_CMD_SET_MAC_EXT_IN_CFG_REJECT_WIDTH 1 +#define MC_CMD_SET_MAC_EXT_IN_CFG_FCNTL_LBN 3 +#define MC_CMD_SET_MAC_EXT_IN_CFG_FCNTL_WIDTH 1 +#define MC_CMD_SET_MAC_EXT_IN_CFG_FCS_LBN 4 +#define MC_CMD_SET_MAC_EXT_IN_CFG_FCS_WIDTH 1 + /* MC_CMD_SET_MAC_OUT msgresponse */ #define MC_CMD_SET_MAC_OUT_LEN 0 @@ -5831,6 +5888,26 @@ #define MC_CMD_NVRAM_INFO_OUT_PHYSDEV_OFST 16 #define MC_CMD_NVRAM_INFO_OUT_PHYSADDR_OFST 20 +/* MC_CMD_NVRAM_INFO_V2_OUT msgresponse */ +#define MC_CMD_NVRAM_INFO_V2_OUT_LEN 28 +#define MC_CMD_NVRAM_INFO_V2_OUT_TYPE_OFST 0 +/* Enum values, see field(s): */ +/* MC_CMD_NVRAM_TYPES/MC_CMD_NVRAM_TYPES_OUT/TYPES */ +#define MC_CMD_NVRAM_INFO_V2_OUT_SIZE_OFST 4 +#define MC_CMD_NVRAM_INFO_V2_OUT_ERASESIZE_OFST 8 +#define MC_CMD_NVRAM_INFO_V2_OUT_FLAGS_OFST 12 +#define MC_CMD_NVRAM_INFO_V2_OUT_PROTECTED_LBN 0 +#define MC_CMD_NVRAM_INFO_V2_OUT_PROTECTED_WIDTH 1 +#define MC_CMD_NVRAM_INFO_V2_OUT_TLV_LBN 1 +#define MC_CMD_NVRAM_INFO_V2_OUT_TLV_WIDTH 1 +#define MC_CMD_NVRAM_INFO_V2_OUT_A_B_LBN 7 +#define MC_CMD_NVRAM_INFO_V2_OUT_A_B_WIDTH 1 +#define MC_CMD_NVRAM_INFO_V2_OUT_PHYSDEV_OFST 16 +#define MC_CMD_NVRAM_INFO_V2_OUT_PHYSADDR_OFST 20 +/* Writes must be multiples of this size. Added to support the MUM on Sorrento. + */ +#define MC_CMD_NVRAM_INFO_V2_OUT_WRITESIZE_OFST 24 + /***********************************/ /* MC_CMD_NVRAM_UPDATE_START @@ -6214,6 +6291,8 @@ #define MC_CMD_SENSOR_CCOM_AVREG_1V8_SUPPLY 0x39 /* enum: CCOM AVREG 1v8 supply (external ADC): mV */ #define MC_CMD_SENSOR_CCOM_AVREG_1V8_SUPPLY_EXTADC 0x3a +/* enum: CCOM RTS temperature: degC */ +#define MC_CMD_SENSOR_CONTROLLER_RTS 0x3b /* enum: Not a sensor: reserved for the next page flag */ #define MC_CMD_SENSOR_PAGE1_NEXT 0x3f /* enum: controller internal temperature sensor voltage on master core @@ -6942,6 +7021,10 @@ * operations */ #define MC_CMD_MUM_OP_QSFP 0xc +/* enum: Request discrete and SODIMM DDR info (type, size, speed grade, voltage + * level) from MUM + */ +#define MC_CMD_MUM_OP_READ_DDR_INFO 0xd /* MC_CMD_MUM_IN_NULL msgrequest */ #define MC_CMD_MUM_IN_NULL_LEN 4 @@ -7127,6 +7210,10 @@ #define MC_CMD_MUM_IN_PROGRAM_CLOCKS_FLAGS_OFST 8 #define MC_CMD_MUM_IN_PROGRAM_CLOCKS_OVERCLOCK_110_LBN 0 #define MC_CMD_MUM_IN_PROGRAM_CLOCKS_OVERCLOCK_110_WIDTH 1 +#define MC_CMD_MUM_IN_PROGRAM_CLOCKS_CLOCK_NIC_FROM_FPGA_LBN 1 +#define MC_CMD_MUM_IN_PROGRAM_CLOCKS_CLOCK_NIC_FROM_FPGA_WIDTH 1 +#define MC_CMD_MUM_IN_PROGRAM_CLOCKS_CLOCK_REF_FROM_XO_LBN 2 +#define MC_CMD_MUM_IN_PROGRAM_CLOCKS_CLOCK_REF_FROM_XO_WIDTH 1 /* MC_CMD_MUM_IN_FPGA_LOAD msgrequest */ #define MC_CMD_MUM_IN_FPGA_LOAD_LEN 8 @@ -7196,6 +7283,11 @@ #define MC_CMD_MUM_IN_QSFP_POLL_BIST_HDR_OFST 4 #define MC_CMD_MUM_IN_QSFP_POLL_BIST_IDX_OFST 8 +/* MC_CMD_MUM_IN_READ_DDR_INFO msgrequest */ +#define MC_CMD_MUM_IN_READ_DDR_INFO_LEN 4 +/* MUM cmd header */ +/* MC_CMD_MUM_IN_CMD_OFST 0 */ + /* MC_CMD_MUM_OUT msgresponse */ #define MC_CMD_MUM_OUT_LEN 0 @@ -7338,6 +7430,69 @@ #define MC_CMD_MUM_OUT_QSFP_POLL_BIST_LEN 4 #define MC_CMD_MUM_OUT_QSFP_POLL_BIST_TEST_OFST 0 +/* MC_CMD_MUM_OUT_READ_DDR_INFO msgresponse */ +#define MC_CMD_MUM_OUT_READ_DDR_INFO_LENMIN 24 +#define MC_CMD_MUM_OUT_READ_DDR_INFO_LENMAX 248 +#define MC_CMD_MUM_OUT_READ_DDR_INFO_LEN(num) (8+8*(num)) +/* Discrete (soldered) DDR resistor strap info */ +#define MC_CMD_MUM_OUT_READ_DDR_INFO_DISCRETE_DDR_INFO_OFST 0 +#define MC_CMD_MUM_OUT_READ_DDR_INFO_VRATIO_LBN 0 +#define MC_CMD_MUM_OUT_READ_DDR_INFO_VRATIO_WIDTH 16 +#define MC_CMD_MUM_OUT_READ_DDR_INFO_RESERVED1_LBN 16 +#define MC_CMD_MUM_OUT_READ_DDR_INFO_RESERVED1_WIDTH 16 +/* Number of SODIMM info records */ +#define MC_CMD_MUM_OUT_READ_DDR_INFO_NUM_RECORDS_OFST 4 +/* Array of SODIMM info records */ +#define MC_CMD_MUM_OUT_READ_DDR_INFO_SODIMM_INFO_RECORD_OFST 8 +#define MC_CMD_MUM_OUT_READ_DDR_INFO_SODIMM_INFO_RECORD_LEN 8 +#define MC_CMD_MUM_OUT_READ_DDR_INFO_SODIMM_INFO_RECORD_LO_OFST 8 +#define MC_CMD_MUM_OUT_READ_DDR_INFO_SODIMM_INFO_RECORD_HI_OFST 12 +#define MC_CMD_MUM_OUT_READ_DDR_INFO_SODIMM_INFO_RECORD_MINNUM 2 +#define MC_CMD_MUM_OUT_READ_DDR_INFO_SODIMM_INFO_RECORD_MAXNUM 30 +#define MC_CMD_MUM_OUT_READ_DDR_INFO_BANK_ID_LBN 0 +#define MC_CMD_MUM_OUT_READ_DDR_INFO_BANK_ID_WIDTH 8 +/* enum: SODIMM bank 1 (Top SODIMM for Sorrento) */ +#define MC_CMD_MUM_OUT_READ_DDR_INFO_BANK1 0x0 +/* enum: SODIMM bank 2 (Bottom SODDIMM for Sorrento) */ +#define MC_CMD_MUM_OUT_READ_DDR_INFO_BANK2 0x1 +/* enum: Total number of SODIMM banks */ +#define MC_CMD_MUM_OUT_READ_DDR_INFO_NUM_BANKS 0x2 +#define MC_CMD_MUM_OUT_READ_DDR_INFO_TYPE_LBN 8 +#define MC_CMD_MUM_OUT_READ_DDR_INFO_TYPE_WIDTH 8 +#define MC_CMD_MUM_OUT_READ_DDR_INFO_RANK_LBN 16 +#define MC_CMD_MUM_OUT_READ_DDR_INFO_RANK_WIDTH 4 +#define MC_CMD_MUM_OUT_READ_DDR_INFO_VOLTAGE_LBN 20 +#define MC_CMD_MUM_OUT_READ_DDR_INFO_VOLTAGE_WIDTH 4 +#define MC_CMD_MUM_OUT_READ_DDR_INFO_NOT_POWERED 0x0 /* enum */ +#define MC_CMD_MUM_OUT_READ_DDR_INFO_1V25 0x1 /* enum */ +#define MC_CMD_MUM_OUT_READ_DDR_INFO_1V35 0x2 /* enum */ +#define MC_CMD_MUM_OUT_READ_DDR_INFO_1V5 0x3 /* enum */ +/* enum: Values 5-15 are reserved for future usage */ +#define MC_CMD_MUM_OUT_READ_DDR_INFO_1V8 0x4 +#define MC_CMD_MUM_OUT_READ_DDR_INFO_SIZE_LBN 24 +#define MC_CMD_MUM_OUT_READ_DDR_INFO_SIZE_WIDTH 8 +#define MC_CMD_MUM_OUT_READ_DDR_INFO_SPEED_LBN 32 +#define MC_CMD_MUM_OUT_READ_DDR_INFO_SPEED_WIDTH 16 +#define MC_CMD_MUM_OUT_READ_DDR_INFO_STATE_LBN 48 +#define MC_CMD_MUM_OUT_READ_DDR_INFO_STATE_WIDTH 4 +/* enum: No module present */ +#define MC_CMD_MUM_OUT_READ_DDR_INFO_ABSENT 0x0 +/* enum: Module present supported and powered on */ +#define MC_CMD_MUM_OUT_READ_DDR_INFO_PRESENT_POWERED 0x1 +/* enum: Module present but bad type */ +#define MC_CMD_MUM_OUT_READ_DDR_INFO_PRESENT_BAD_TYPE 0x2 +/* enum: Module present but incompatible voltage */ +#define MC_CMD_MUM_OUT_READ_DDR_INFO_PRESENT_BAD_VOLTAGE 0x3 +/* enum: Module present but unknown SPD */ +#define MC_CMD_MUM_OUT_READ_DDR_INFO_PRESENT_BAD_SPD 0x4 +/* enum: Module present but slot cannot support it */ +#define MC_CMD_MUM_OUT_READ_DDR_INFO_PRESENT_BAD_SLOT 0x5 +/* enum: Modules may or may not be present, but cannot establish contact by I2C + */ +#define MC_CMD_MUM_OUT_READ_DDR_INFO_NOT_REACHABLE 0x6 +#define MC_CMD_MUM_OUT_READ_DDR_INFO_RESERVED2_LBN 52 +#define MC_CMD_MUM_OUT_READ_DDR_INFO_RESERVED2_WIDTH 12 + /* MC_CMD_RESOURCE_SPECIFIER enum */ /* enum: Any */ #define MC_CMD_RESOURCE_INSTANCE_ANY 0xffffffff @@ -7410,6 +7565,8 @@ #define NVRAM_PARTITION_TYPE_DYNAMIC_CONFIG 0x500 /* enum: Expansion ROM configuration data for port 0 */ #define NVRAM_PARTITION_TYPE_EXPROM_CONFIG_PORT0 0x600 +/* enum: Synonym for EXPROM_CONFIG_PORT0 as used in pmap files */ +#define NVRAM_PARTITION_TYPE_EXPROM_CONFIG 0x600 /* enum: Expansion ROM configuration data for port 1 */ #define NVRAM_PARTITION_TYPE_EXPROM_CONFIG_PORT1 0x601 /* enum: Expansion ROM configuration data for port 2 */ @@ -7418,6 +7575,8 @@ #define NVRAM_PARTITION_TYPE_EXPROM_CONFIG_PORT3 0x603 /* enum: Non-volatile log output partition */ #define NVRAM_PARTITION_TYPE_LOG 0x700 +/* enum: Non-volatile log output of second core on dual-core device */ +#define NVRAM_PARTITION_TYPE_LOG_SLAVE 0x701 /* enum: Device state dump output partition */ #define NVRAM_PARTITION_TYPE_DUMP 0x800 /* enum: Application license key storage partition */ @@ -7450,6 +7609,20 @@ #define NVRAM_PARTITION_TYPE_MUM_USER_ROM 0xc05 /* enum: MUM fuses and lockbits partition. */ #define NVRAM_PARTITION_TYPE_MUM_FUSELOCK 0xc06 +/* enum: UEFI expansion ROM if separate from PXE */ +#define NVRAM_PARTITION_TYPE_EXPANSION_UEFI 0xd00 +/* enum: Spare partition 0 */ +#define NVRAM_PARTITION_TYPE_SPARE_0 0x1000 +/* enum: Spare partition 1 */ +#define NVRAM_PARTITION_TYPE_SPARE_1 0x1100 +/* enum: Spare partition 2 */ +#define NVRAM_PARTITION_TYPE_SPARE_2 0x1200 +/* enum: Spare partition 3 */ +#define NVRAM_PARTITION_TYPE_SPARE_3 0x1300 +/* enum: Spare partition 4 */ +#define NVRAM_PARTITION_TYPE_SPARE_4 0x1400 +/* enum: Spare partition 5 */ +#define NVRAM_PARTITION_TYPE_SPARE_5 0x1500 /* enum: Start of reserved value range (firmware may use for any purpose) */ #define NVRAM_PARTITION_TYPE_RESERVED_VALUES_MIN 0xff00 /* enum: End of reserved value range (firmware may use for any purpose) */ @@ -7699,6 +7872,8 @@ #define MC_CMD_INIT_RXQ_IN_FLAG_PREFIX_WIDTH 1 #define MC_CMD_INIT_RXQ_IN_FLAG_DISABLE_SCATTER_LBN 9 #define MC_CMD_INIT_RXQ_IN_FLAG_DISABLE_SCATTER_WIDTH 1 +#define MC_CMD_INIT_RXQ_IN_FLAG_FORCE_EV_MERGING_LBN 10 +#define MC_CMD_INIT_RXQ_IN_FLAG_FORCE_EV_MERGING_WIDTH 1 /* Owner ID to use if in buffer mode (zero if physical) */ #define MC_CMD_INIT_RXQ_IN_OWNER_ID_OFST 20 /* The port ID associated with the v-adaptor which should contain this DMAQ. */ @@ -7759,6 +7934,8 @@ #define MC_CMD_INIT_RXQ_EXT_IN_PS_BUFF_64K 0x4 /* enum */ #define MC_CMD_INIT_RXQ_EXT_IN_FLAG_WANT_OUTER_CLASSES_LBN 18 #define MC_CMD_INIT_RXQ_EXT_IN_FLAG_WANT_OUTER_CLASSES_WIDTH 1 +#define MC_CMD_INIT_RXQ_EXT_IN_FLAG_FORCE_EV_MERGING_LBN 19 +#define MC_CMD_INIT_RXQ_EXT_IN_FLAG_FORCE_EV_MERGING_WIDTH 1 /* Owner ID to use if in buffer mode (zero if physical) */ #define MC_CMD_INIT_RXQ_EXT_IN_OWNER_ID_OFST 20 /* The port ID associated with the v-adaptor which should contain this DMAQ. */ @@ -8091,6 +8268,46 @@ #define MC_CMD_PROXY_CONFIGURE_IN_ALLOWED_MCDI_MASK_OFST 44 #define MC_CMD_PROXY_CONFIGURE_IN_ALLOWED_MCDI_MASK_LEN 64 +/* MC_CMD_PROXY_CONFIGURE_EXT_IN msgrequest */ +#define MC_CMD_PROXY_CONFIGURE_EXT_IN_LEN 112 +#define MC_CMD_PROXY_CONFIGURE_EXT_IN_FLAGS_OFST 0 +#define MC_CMD_PROXY_CONFIGURE_EXT_IN_ENABLE_LBN 0 +#define MC_CMD_PROXY_CONFIGURE_EXT_IN_ENABLE_WIDTH 1 +/* Host provides a contiguous memory buffer that contains at least NUM_BLOCKS + * of blocks, each of the size REQUEST_BLOCK_SIZE. + */ +#define MC_CMD_PROXY_CONFIGURE_EXT_IN_STATUS_BUFF_ADDR_OFST 4 +#define MC_CMD_PROXY_CONFIGURE_EXT_IN_STATUS_BUFF_ADDR_LEN 8 +#define MC_CMD_PROXY_CONFIGURE_EXT_IN_STATUS_BUFF_ADDR_LO_OFST 4 +#define MC_CMD_PROXY_CONFIGURE_EXT_IN_STATUS_BUFF_ADDR_HI_OFST 8 +/* Must be a power of 2 */ +#define MC_CMD_PROXY_CONFIGURE_EXT_IN_STATUS_BLOCK_SIZE_OFST 12 +/* Host provides a contiguous memory buffer that contains at least NUM_BLOCKS + * of blocks, each of the size REPLY_BLOCK_SIZE. + */ +#define MC_CMD_PROXY_CONFIGURE_EXT_IN_REQUEST_BUFF_ADDR_OFST 16 +#define MC_CMD_PROXY_CONFIGURE_EXT_IN_REQUEST_BUFF_ADDR_LEN 8 +#define MC_CMD_PROXY_CONFIGURE_EXT_IN_REQUEST_BUFF_ADDR_LO_OFST 16 +#define MC_CMD_PROXY_CONFIGURE_EXT_IN_REQUEST_BUFF_ADDR_HI_OFST 20 +/* Must be a power of 2 */ +#define MC_CMD_PROXY_CONFIGURE_EXT_IN_REQUEST_BLOCK_SIZE_OFST 24 +/* Host provides a contiguous memory buffer that contains at least NUM_BLOCKS + * of blocks, each of the size STATUS_BLOCK_SIZE. This buffer is only needed if + * host intends to complete proxied operations by using MC_CMD_PROXY_CMD. + */ +#define MC_CMD_PROXY_CONFIGURE_EXT_IN_REPLY_BUFF_ADDR_OFST 28 +#define MC_CMD_PROXY_CONFIGURE_EXT_IN_REPLY_BUFF_ADDR_LEN 8 +#define MC_CMD_PROXY_CONFIGURE_EXT_IN_REPLY_BUFF_ADDR_LO_OFST 28 +#define MC_CMD_PROXY_CONFIGURE_EXT_IN_REPLY_BUFF_ADDR_HI_OFST 32 +/* Must be a power of 2, or zero if this buffer is not provided */ +#define MC_CMD_PROXY_CONFIGURE_EXT_IN_REPLY_BLOCK_SIZE_OFST 36 +/* Applies to all three buffers */ +#define MC_CMD_PROXY_CONFIGURE_EXT_IN_NUM_BLOCKS_OFST 40 +/* A bit mask defining which MCDI operations may be proxied */ +#define MC_CMD_PROXY_CONFIGURE_EXT_IN_ALLOWED_MCDI_MASK_OFST 44 +#define MC_CMD_PROXY_CONFIGURE_EXT_IN_ALLOWED_MCDI_MASK_LEN 64 +#define MC_CMD_PROXY_CONFIGURE_EXT_IN_RESERVED_OFST 108 + /* MC_CMD_PROXY_CONFIGURE_OUT msgresponse */ #define MC_CMD_PROXY_CONFIGURE_OUT_LEN 0 @@ -9439,6 +9656,16 @@ #define MC_CMD_GET_CAPABILITIES_OUT_LEN 20 /* First word of flags. */ #define MC_CMD_GET_CAPABILITIES_OUT_FLAGS1_OFST 0 +#define MC_CMD_GET_CAPABILITIES_OUT_DRV_ATTACH_PREBOOT_LBN 7 +#define MC_CMD_GET_CAPABILITIES_OUT_DRV_ATTACH_PREBOOT_WIDTH 1 +#define MC_CMD_GET_CAPABILITIES_OUT_RX_FORCE_EVENT_MERGING_LBN 8 +#define MC_CMD_GET_CAPABILITIES_OUT_RX_FORCE_EVENT_MERGING_WIDTH 1 +#define MC_CMD_GET_CAPABILITIES_OUT_SET_MAC_ENHANCED_LBN 9 +#define MC_CMD_GET_CAPABILITIES_OUT_SET_MAC_ENHANCED_WIDTH 1 +#define MC_CMD_GET_CAPABILITIES_OUT_UNKNOWN_UCAST_DST_FILTER_ALWAYS_MULTI_RECIPIENT_LBN 10 +#define MC_CMD_GET_CAPABILITIES_OUT_UNKNOWN_UCAST_DST_FILTER_ALWAYS_MULTI_RECIPIENT_WIDTH 1 +#define MC_CMD_GET_CAPABILITIES_OUT_VADAPTOR_PERMIT_SET_MAC_WHEN_FILTERS_INSTALLED_LBN 11 +#define MC_CMD_GET_CAPABILITIES_OUT_VADAPTOR_PERMIT_SET_MAC_WHEN_FILTERS_INSTALLED_WIDTH 1 #define MC_CMD_GET_CAPABILITIES_OUT_TX_MAC_SECURITY_FILTERING_LBN 12 #define MC_CMD_GET_CAPABILITIES_OUT_TX_MAC_SECURITY_FILTERING_WIDTH 1 #define MC_CMD_GET_CAPABILITIES_OUT_ADDITIONAL_RSS_MODES_LBN 13 @@ -9506,6 +9733,8 @@ #define MC_CMD_GET_CAPABILITIES_OUT_RXDP_TEST_FW_RX_HDR_SPLIT 0x107 /* enum: RXDP Test firmware image 8 */ #define MC_CMD_GET_CAPABILITIES_OUT_RXDP_TEST_FW_DISABLE_DL 0x108 +/* enum: RXDP Test firmware image 9 */ +#define MC_CMD_GET_CAPABILITIES_OUT_RXDP_TEST_FW_DOORBELL_DELAY 0x10b /* TxDPCPU firmware id. */ #define MC_CMD_GET_CAPABILITIES_OUT_TX_DPCPU_FW_ID_OFST 6 #define MC_CMD_GET_CAPABILITIES_OUT_TX_DPCPU_FW_ID_LEN 2 @@ -9851,6 +10080,26 @@ /***********************************/ +/* MC_CMD_VSWITCH_QUERY + * read some config of v-switch. For now this command is an empty placeholder. + * It may be used to check if a v-switch is connected to a given EVB port (if + * not, then the command returns ENOENT). + */ +#define MC_CMD_VSWITCH_QUERY 0x63 +#undef MC_CMD_0x63_PRIVILEGE_CTG + +#define MC_CMD_0x63_PRIVILEGE_CTG SRIOV_CTG_GENERAL + +/* MC_CMD_VSWITCH_QUERY_IN msgrequest */ +#define MC_CMD_VSWITCH_QUERY_IN_LEN 4 +/* The port to which the v-switch is connected. */ +#define MC_CMD_VSWITCH_QUERY_IN_UPSTREAM_PORT_ID_OFST 0 + +/* MC_CMD_VSWITCH_QUERY_OUT msgresponse */ +#define MC_CMD_VSWITCH_QUERY_OUT_LEN 0 + + +/***********************************/ /* MC_CMD_VPORT_ALLOC * allocate a v-port. */ @@ -9887,6 +10136,8 @@ #define MC_CMD_VPORT_ALLOC_IN_FLAGS_OFST 8 #define MC_CMD_VPORT_ALLOC_IN_FLAG_AUTO_PORT_LBN 0 #define MC_CMD_VPORT_ALLOC_IN_FLAG_AUTO_PORT_WIDTH 1 +#define MC_CMD_VPORT_ALLOC_IN_FLAG_VLAN_RESTRICT_LBN 1 +#define MC_CMD_VPORT_ALLOC_IN_FLAG_VLAN_RESTRICT_WIDTH 1 /* The number of VLAN tags to insert/remove. An error will be returned if * incompatible with the number of VLAN tags specified for the upstream * v-switch. @@ -9940,6 +10191,8 @@ #define MC_CMD_VADAPTOR_ALLOC_IN_FLAGS_OFST 8 #define MC_CMD_VADAPTOR_ALLOC_IN_FLAG_AUTO_VADAPTOR_LBN 0 #define MC_CMD_VADAPTOR_ALLOC_IN_FLAG_AUTO_VADAPTOR_WIDTH 1 +#define MC_CMD_VADAPTOR_ALLOC_IN_FLAG_PERMIT_SET_MAC_WHEN_FILTERS_INSTALLED_LBN 1 +#define MC_CMD_VADAPTOR_ALLOC_IN_FLAG_PERMIT_SET_MAC_WHEN_FILTERS_INSTALLED_WIDTH 1 /* The number of VLAN tags to strip on receive */ #define MC_CMD_VADAPTOR_ALLOC_IN_NUM_VLANS_OFST 12 /* The number of VLAN tags to transparently insert/remove. */ @@ -10021,6 +10274,30 @@ /***********************************/ +/* MC_CMD_VADAPTOR_QUERY + * read some config of v-adaptor. + */ +#define MC_CMD_VADAPTOR_QUERY 0x61 +#undef MC_CMD_0x61_PRIVILEGE_CTG + +#define MC_CMD_0x61_PRIVILEGE_CTG SRIOV_CTG_GENERAL + +/* MC_CMD_VADAPTOR_QUERY_IN msgrequest */ +#define MC_CMD_VADAPTOR_QUERY_IN_LEN 4 +/* The port to which the v-adaptor is connected. */ +#define MC_CMD_VADAPTOR_QUERY_IN_UPSTREAM_PORT_ID_OFST 0 + +/* MC_CMD_VADAPTOR_QUERY_OUT msgresponse */ +#define MC_CMD_VADAPTOR_QUERY_OUT_LEN 12 +/* The EVB port flags as defined at MC_CMD_VPORT_ALLOC. */ +#define MC_CMD_VADAPTOR_QUERY_OUT_PORT_FLAGS_OFST 0 +/* The v-adaptor flags as defined at MC_CMD_VADAPTOR_ALLOC. */ +#define MC_CMD_VADAPTOR_QUERY_OUT_VADAPTOR_FLAGS_OFST 4 +/* The number of VLAN tags that may still be added */ +#define MC_CMD_VADAPTOR_QUERY_OUT_NUM_AVAILABLE_VLAN_TAGS_OFST 8 + + +/***********************************/ /* MC_CMD_EVB_PORT_ASSIGN * assign a port to a PCI function. */ @@ -10558,6 +10835,76 @@ /***********************************/ +/* MC_CMD_VPORT_RECONFIGURE + * Replace VLAN tags and/or MAC addresses of an existing v-port. If the v-port + * has already been passed to another function (v-port's user), then that + * function will be reset before applying the changes. + */ +#define MC_CMD_VPORT_RECONFIGURE 0xeb +#undef MC_CMD_0xeb_PRIVILEGE_CTG + +#define MC_CMD_0xeb_PRIVILEGE_CTG SRIOV_CTG_GENERAL + +/* MC_CMD_VPORT_RECONFIGURE_IN msgrequest */ +#define MC_CMD_VPORT_RECONFIGURE_IN_LEN 44 +/* The handle of the v-port */ +#define MC_CMD_VPORT_RECONFIGURE_IN_VPORT_ID_OFST 0 +/* Flags requesting what should be changed. */ +#define MC_CMD_VPORT_RECONFIGURE_IN_FLAGS_OFST 4 +#define MC_CMD_VPORT_RECONFIGURE_IN_REPLACE_VLAN_TAGS_LBN 0 +#define MC_CMD_VPORT_RECONFIGURE_IN_REPLACE_VLAN_TAGS_WIDTH 1 +#define MC_CMD_VPORT_RECONFIGURE_IN_REPLACE_MACADDRS_LBN 1 +#define MC_CMD_VPORT_RECONFIGURE_IN_REPLACE_MACADDRS_WIDTH 1 +/* The number of VLAN tags to insert/remove. An error will be returned if + * incompatible with the number of VLAN tags specified for the upstream + * v-switch. + */ +#define MC_CMD_VPORT_RECONFIGURE_IN_NUM_VLAN_TAGS_OFST 8 +/* The actual VLAN tags to insert/remove */ +#define MC_CMD_VPORT_RECONFIGURE_IN_VLAN_TAGS_OFST 12 +#define MC_CMD_VPORT_RECONFIGURE_IN_VLAN_TAG_0_LBN 0 +#define MC_CMD_VPORT_RECONFIGURE_IN_VLAN_TAG_0_WIDTH 16 +#define MC_CMD_VPORT_RECONFIGURE_IN_VLAN_TAG_1_LBN 16 +#define MC_CMD_VPORT_RECONFIGURE_IN_VLAN_TAG_1_WIDTH 16 +/* The number of MAC addresses to add */ +#define MC_CMD_VPORT_RECONFIGURE_IN_NUM_MACADDRS_OFST 16 +/* MAC addresses to add */ +#define MC_CMD_VPORT_RECONFIGURE_IN_MACADDRS_OFST 20 +#define MC_CMD_VPORT_RECONFIGURE_IN_MACADDRS_LEN 6 +#define MC_CMD_VPORT_RECONFIGURE_IN_MACADDRS_NUM 4 + +/* MC_CMD_VPORT_RECONFIGURE_OUT msgresponse */ +#define MC_CMD_VPORT_RECONFIGURE_OUT_LEN 4 +#define MC_CMD_VPORT_RECONFIGURE_OUT_FLAGS_OFST 0 +#define MC_CMD_VPORT_RECONFIGURE_OUT_RESET_DONE_LBN 0 +#define MC_CMD_VPORT_RECONFIGURE_OUT_RESET_DONE_WIDTH 1 + + +/***********************************/ +/* MC_CMD_EVB_PORT_QUERY + * read some config of v-port. + */ +#define MC_CMD_EVB_PORT_QUERY 0x62 +#undef MC_CMD_0x62_PRIVILEGE_CTG + +#define MC_CMD_0x62_PRIVILEGE_CTG SRIOV_CTG_GENERAL + +/* MC_CMD_EVB_PORT_QUERY_IN msgrequest */ +#define MC_CMD_EVB_PORT_QUERY_IN_LEN 4 +/* The handle of the v-port */ +#define MC_CMD_EVB_PORT_QUERY_IN_PORT_ID_OFST 0 + +/* MC_CMD_EVB_PORT_QUERY_OUT msgresponse */ +#define MC_CMD_EVB_PORT_QUERY_OUT_LEN 8 +/* The EVB port flags as defined at MC_CMD_VPORT_ALLOC. */ +#define MC_CMD_EVB_PORT_QUERY_OUT_PORT_FLAGS_OFST 0 +/* The number of VLAN tags that may be used on a v-adaptor connected to this + * EVB port. + */ +#define MC_CMD_EVB_PORT_QUERY_OUT_NUM_AVAILABLE_VLAN_TAGS_OFST 4 + + +/***********************************/ /* MC_CMD_DUMP_BUFTBL_ENTRIES * Dump buffer table entries, mainly for command client debug use. Dumps * absolute entries, and does not use chunk handles. All entries must be in @@ -10601,6 +10948,14 @@ #define MC_CMD_SET_RXDP_CONFIG_IN_DATA_OFST 0 #define MC_CMD_SET_RXDP_CONFIG_IN_PAD_HOST_DMA_LBN 0 #define MC_CMD_SET_RXDP_CONFIG_IN_PAD_HOST_DMA_WIDTH 1 +#define MC_CMD_SET_RXDP_CONFIG_IN_PAD_HOST_LEN_LBN 1 +#define MC_CMD_SET_RXDP_CONFIG_IN_PAD_HOST_LEN_WIDTH 2 +/* enum: pad to 64 bytes */ +#define MC_CMD_SET_RXDP_CONFIG_IN_PAD_HOST_64 0x0 +/* enum: pad to 128 bytes (Medford only) */ +#define MC_CMD_SET_RXDP_CONFIG_IN_PAD_HOST_128 0x1 +/* enum: pad to 256 bytes (Medford only) */ +#define MC_CMD_SET_RXDP_CONFIG_IN_PAD_HOST_256 0x2 /* MC_CMD_SET_RXDP_CONFIG_OUT msgresponse */ #define MC_CMD_SET_RXDP_CONFIG_OUT_LEN 0 @@ -10623,6 +10978,10 @@ #define MC_CMD_GET_RXDP_CONFIG_OUT_DATA_OFST 0 #define MC_CMD_GET_RXDP_CONFIG_OUT_PAD_HOST_DMA_LBN 0 #define MC_CMD_GET_RXDP_CONFIG_OUT_PAD_HOST_DMA_WIDTH 1 +#define MC_CMD_GET_RXDP_CONFIG_OUT_PAD_HOST_LEN_LBN 1 +#define MC_CMD_GET_RXDP_CONFIG_OUT_PAD_HOST_LEN_WIDTH 2 +/* Enum values, see field(s): */ +/* MC_CMD_SET_RXDP_CONFIG/MC_CMD_SET_RXDP_CONFIG_IN/PAD_HOST_LEN */ /***********************************/ @@ -11508,6 +11867,10 @@ #define MC_CMD_PCIE_TUNE_RXEQ_GET_OUT_DFE_TAP4 0x5 /* enum: DFE Tap5 (0 - max negative, 32 - zero, 63 - max positive) */ #define MC_CMD_PCIE_TUNE_RXEQ_GET_OUT_DFE_TAP5 0x6 +/* enum: DFE DLev */ +#define MC_CMD_PCIE_TUNE_RXEQ_GET_OUT_DFE_DLEV 0x7 +/* enum: Figure of Merit */ +#define MC_CMD_PCIE_TUNE_RXEQ_GET_OUT_FOM 0x8 #define MC_CMD_PCIE_TUNE_RXEQ_GET_OUT_PARAM_LANE_LBN 8 #define MC_CMD_PCIE_TUNE_RXEQ_GET_OUT_PARAM_LANE_WIDTH 4 #define MC_CMD_PCIE_TUNE_RXEQ_GET_OUT_LANE_0 0x0 /* enum */ @@ -12133,12 +12496,27 @@ #define MC_CMD_PRIVILEGE_MASK_IN_GRP_ONLOAD 0x4 /* enum */ #define MC_CMD_PRIVILEGE_MASK_IN_GRP_PTP 0x8 /* enum */ #define MC_CMD_PRIVILEGE_MASK_IN_GRP_INSECURE_FILTERS 0x10 /* enum */ -#define MC_CMD_PRIVILEGE_MASK_IN_GRP_MAC_SPOOFING 0x20 /* enum */ +/* enum: Deprecated. Equivalent to MAC_SPOOFING_TX combined with CHANGE_MAC. */ +#define MC_CMD_PRIVILEGE_MASK_IN_GRP_MAC_SPOOFING 0x20 #define MC_CMD_PRIVILEGE_MASK_IN_GRP_UNICAST 0x40 /* enum */ #define MC_CMD_PRIVILEGE_MASK_IN_GRP_MULTICAST 0x80 /* enum */ #define MC_CMD_PRIVILEGE_MASK_IN_GRP_BROADCAST 0x100 /* enum */ #define MC_CMD_PRIVILEGE_MASK_IN_GRP_ALL_MULTICAST 0x200 /* enum */ #define MC_CMD_PRIVILEGE_MASK_IN_GRP_PROMISCUOUS 0x400 /* enum */ +/* enum: Allows to set the TX packets' source MAC address to any arbitrary MAC + * adress. + */ +#define MC_CMD_PRIVILEGE_MASK_IN_GRP_MAC_SPOOFING_TX 0x800 +/* enum: Privilege that allows a Function to change the MAC address configured + * in its associated vAdapter/vPort. + */ +#define MC_CMD_PRIVILEGE_MASK_IN_GRP_CHANGE_MAC 0x1000 +/* enum: Privilege that allows a Function to install filters that specify VLANs + * that are not in the permit list for the associated vPort. This privilege is + * primarily to support ESX where vPorts are created that restrict traffic to + * only a set of permitted VLANs. See the vPort flag FLAG_VLAN_RESTRICT. + */ +#define MC_CMD_PRIVILEGE_MASK_IN_GRP_UNRESTRICTED_VLAN 0x2000 /* enum: Set this bit to indicate that a new privilege mask is to be set, * otherwise the command will only read the existing mask. */ @@ -12396,7 +12774,7 @@ /* Sector type */ #define MC_CMD_XPM_WRITE_SECTOR_IN_TYPE_OFST 4 /* Enum values, see field(s): */ -/* MC_CMD_XPM_READ_SECTOR_OUT/TYPE */ +/* MC_CMD_XPM_READ_SECTOR/MC_CMD_XPM_READ_SECTOR_OUT/TYPE */ /* Sector size */ #define MC_CMD_XPM_WRITE_SECTOR_IN_SIZE_OFST 8 /* Sector data */ @@ -12516,4 +12894,54 @@ /* MC_CMD_XPM_WRITE_TEST_OUT msgresponse */ #define MC_CMD_XPM_WRITE_TEST_OUT_LEN 0 + +/***********************************/ +/* MC_CMD_EXEC_SIGNED + * Check the CMAC of the contents of IMEM and DMEM against the value supplied + * and if correct begin execution from the start of IMEM. The caller supplies a + * key ID, the length of IMEM and DMEM to validate and the expected CMAC. CMAC + * computation runs from the start of IMEM, and from the start of DMEM + 16k, + * to match flash booting. The command will respond with EINVAL if the CMAC + * does match, otherwise it will respond with success before it jumps to IMEM. + */ +#define MC_CMD_EXEC_SIGNED 0x10c +#undef MC_CMD_0x10c_PRIVILEGE_CTG + +#define MC_CMD_0x10c_PRIVILEGE_CTG SRIOV_CTG_ADMIN + +/* MC_CMD_EXEC_SIGNED_IN msgrequest */ +#define MC_CMD_EXEC_SIGNED_IN_LEN 28 +/* the length of code to include in the CMAC */ +#define MC_CMD_EXEC_SIGNED_IN_CODELEN_OFST 0 +/* the length of date to include in the CMAC */ +#define MC_CMD_EXEC_SIGNED_IN_DATALEN_OFST 4 +/* the XPM sector containing the key to use */ +#define MC_CMD_EXEC_SIGNED_IN_KEYSECTOR_OFST 8 +/* the expected CMAC value */ +#define MC_CMD_EXEC_SIGNED_IN_CMAC_OFST 12 +#define MC_CMD_EXEC_SIGNED_IN_CMAC_LEN 16 + +/* MC_CMD_EXEC_SIGNED_OUT msgresponse */ +#define MC_CMD_EXEC_SIGNED_OUT_LEN 0 + + +/***********************************/ +/* MC_CMD_PREPARE_SIGNED + * Prepare to upload a signed image. This will scrub the specified length of + * the data region, which must be at least as large as the DATALEN supplied to + * MC_CMD_EXEC_SIGNED. + */ +#define MC_CMD_PREPARE_SIGNED 0x10d +#undef MC_CMD_0x10d_PRIVILEGE_CTG + +#define MC_CMD_0x10d_PRIVILEGE_CTG SRIOV_CTG_ADMIN + +/* MC_CMD_PREPARE_SIGNED_IN msgrequest */ +#define MC_CMD_PREPARE_SIGNED_IN_LEN 4 +/* the length of data area to clear */ +#define MC_CMD_PREPARE_SIGNED_IN_DATALEN_OFST 0 + +/* MC_CMD_PREPARE_SIGNED_OUT msgresponse */ +#define MC_CMD_PREPARE_SIGNED_OUT_LEN 0 + #endif /* _SIENA_MC_DRIVER_PCOL_H */
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201512030806.tB386BX3012498>