Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 22 Oct 1998 09:48:07 +0200
From:      Ralf Schade <ralf.schade@koe.siemens.de>
To:        questions@FreeBSD.ORG
Subject:   building a new kernel
Message-ID:  <362EE336.BF7D040B@koe.siemens.de>

next in thread | raw e-mail | index | archive | help
Dies ist eine mehrteilige Nachricht im MIME-Format.
--------------84314F3EE69FF40ED8BF6071
Content-Type: text/plain; charset=iso-8859-1
Content-Transfer-Encoding: 8bit

Hallo,
I have an error due the compiling of a new kernel.
I send you my configfile.
Please, can you tell what´s wrong.

Thanks a lot

R. Schade

E-Mail:     mailto:Ralf.Schade@koe.siemens.de



--------------84314F3EE69FF40ED8BF6071
Content-Type: text/plain; charset=us-ascii; name="Freebie"
Content-Disposition: inline; filename="Freebie"
Content-Transfer-Encoding: 7bit

#
# GENERIC -- Generic machine with WD/AHx/NCR/BTx family disks
#
# For more information read the handbook part System Administration -> 
# Configuring the FreeBSD Kernel -> The Configuration File. 
# The handbook is available in /usr/share/doc/handbook or online as
# latest version from the FreeBSD World Wide Web server 
# <URL:http://www.FreeBSD.ORG/>;
#
# An exhaustive list of options and more detailed explanations of the 
# device lines is present in the ./LINT configuration file. If you are 
# in doubt as to the purpose or necessity of a line, check first in LINT.
#
#	$Id: GENERIC,v 1.77.2.22 1998/03/24 01:20:14 jkh Exp $

machine		"i386"
#cpu		"I386_CPU"
#cpu		"I486_CPU"
cpu		"I586_CPU"
#cpu		"I686_CPU"
ident		FREEBIE
maxusers	10

#options		MATH_EMULATE		#Support for x87 emulation
options		INET			#InterNETworking
options		FFS			#Berkeley Fast Filesystem
#options		NFS			#Network Filesystem
options		MSDOSFS			#MSDOS Filesystem
options		"CD9660"		#ISO 9660 Filesystem
options		PROCFS			#Process filesystem
options		"COMPAT_43"		#Compatible with BSD 4.3 [KEEP THIS!]
#options		SCSI_DELAY=15		#Be pessimistic about Joe SCSI device
options		BOUNCE_BUFFERS		#include support for DMA bounce buffers
options		UCONSOLE		#Allow users to grab the console
options		FAILSAFE		#Be conservative
options		USERCONFIG		#boot -c editor
options		VISUAL_USERCONFIG	#visual boot -c editor

config		kernel	root on wd0

#controller	isa0
#controller	eisa0
controller	pci0

controller	fdc0	at isa? port "IO_FD1" bio flags 1  irq 6 drq 2 vector fdintr
disk		fd0	at fdc0 drive 0
#disk		fd1	at fdc0 drive 1
tape		ft0	at fdc0 drive 2

#options		"CMD640"	# work around CMD640 chip deficiency
controller	wdc0	at isa? port "IO_WD1" bio irq 14 vector wdintr
disk		wd0	at wdc0 drive 0
disk		wd1	at wdc0 drive 1

controller	wdc1	at isa? port "IO_WD2" bio irq 15 vector wdintr
disk		wd2	at wdc1 drive 0
#disk		wd3	at wdc1 drive 1

options		ATAPI		#Enable ATAPI support for IDE bus
#options		ATAPI_STATIC	#Don't do it as an LKM
device		wcd0		#IDE CD-ROM
#device		wfd0		#IDE floppy (LS-120)

# A single entry for any of these controllers (ncr, ahb, ahc, amd) is
# sufficient for any number of installed devices.
#
# Note: The dpt driver is present in this release but was left disabled
# due to its relatively late entry (it's almost certainly benign to enable
# it but we didn't want to risk any chance of destabilizing 2.2.6).  To
# enable DPT support, uncomment the dpt0 controller entry and the two
# options DPTOPT and DPT_MEASURE_PERFORMANCE entries below.

#controller	ncr0
#controller	amd0
#controller	ahb0
#controller	ahc0
#controller	dpt0
#controller	bt0	at isa? port "IO_BT0" bio irq ? vector bt_isa_intr
#controller	uha0	at isa? port "IO_UHA0" bio irq ? drq 5 vector uhaintr
#controller	aha0	at isa? port "IO_AHA0" bio irq ? drq 5 vector ahaintr
#controller	aic0	at isa? port 0x340 bio irq 11 vector aicintr
#controller	nca0	at isa? port 0x1f88 bio irq 10 vector ncaintr
#controller	nca1	at isa? port 0x350 bio irq 5 vector ncaintr
#controller	sea0	at isa? bio irq 5 iomem 0xc8000 iosiz 0x2000 vector seaintr

#options		DPTOPT			# will go away soon
#options   		DPT_MEASURE_PERFORMANCE	# just enable for now
#options		DPT_VERIFY_HINTR	# Some hardware must have it!
#options		DPT_TRACK_CCB_STATES	# Some hardware must have it!
#options    		DPT_HANDLE_TIMEOUTS	# Some hardware must have it!
#options		DPT_TIMEOUT_FACTOR=4	# Some hardware needs more

#controller	scbus0

#device		sd0

#device		od0	#See LINT for possible `od' options.

#device		st0

#device		cd0	#Only need one of these, the code dynamically grows

#device		wt0	at isa? port 0x300 bio irq 5 drq 1 vector wtintr
#device		mcd0	at isa? port 0x300 bio irq 10 vector mcdintr

#controller	matcd0	at isa? port 0x230 bio

#device		scd0	at isa? port 0x230 bio

# syscons is the default console driver, resembling an SCO console
device		sc0	at isa? port "IO_KBD" tty irq 1 vector scintr
# Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver
#device		vt0	at isa? port "IO_KBD" tty irq 1 vector pcrint
options		XSERVER			# support for X server
#options		FAT_CURSOR		# start with block cursor
# If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines
#options		PCVT_SCANSET=2		# IBM keyboards are non-std

# Mandatory, don't remove
device		npx0	at isa? port "IO_NPX" flags 0x1 irq 13 vector npxintr

#
# Laptop support (see LINT for more options)
#
#device		apm0    at isa?	disable	# Advanced Power Management
#options		APM_BROKEN_STATCLOCK	# Workaround some buggy APM BIOS
# PCCARD (PCMCIA) support
#controller	card0
#device		pcic0	at card?
#device		pcic1	at card?

device		sio0	at isa? port "IO_COM1" tty irq 4 vector siointr
device		sio1	at isa? port "IO_COM2" tty irq 3 vector siointr
#device		sio2	at isa? disable port "IO_COM3" tty irq 5 vector siointr
#device		sio3	at isa? disable port "IO_COM4" tty irq 9 vector siointr

device		lpt0	at isa? port? tty irq 7 vector lptintr
#device		lpt1	at isa? port? tty
#device		mse0	at isa? port 0x23c tty irq 5 vector mseintr

#device		psm0	at isa? port "IO_KBD" conflicts tty irq 12 vector psmintr

# Order is important here due to intrusive probes, do *not* alphabetize
# this list of network interfaces until the probes have been fixed.
# Right now it appears that the ie0 must be probed before ep0. See
# revision 1.20 of this file.
#device de0
#device fxp0
#device tx0
#device vx0

#device ed0 at isa? port 0x280 net irq 10 iomem 0xd8000 vector edintr
#device ie0 at isa? port 0x300 net irq 10 iomem 0xd0000 vector ieintr
#device ep0 at isa? port 0x300 net irq 10 vector epintr
#device ex0 at isa? port? net irq? vector exintr
#device fe0 at isa? port 0x300 net irq ? vector feintr
#device le0 at isa? port 0x300 net irq 5 iomem 0xd0000 vector le_intr
#device lnc0 at isa? port 0x280 net irq 10 drq 0 vector lncintr
#device ze0 at isa? port 0x300 net irq 5 iomem 0xd8000 vector zeintr
#device zp0 at isa? port 0x300 net irq 10 iomem 0xd8000 vector zpintr

pseudo-device	loop
pseudo-device	ether
pseudo-device	log
pseudo-device	sl	1
pseudo-device	ppp	1
pseudo-device	vn	1
pseudo-device	tun	1
pseudo-device	pty	16
pseudo-device	gzip		# Exec gzipped a.out's

# KTRACE enables the system-call tracing facility ktrace(2).
# This adds 4 KB bloat to your kernel, and slightly increases
# the costs of each syscall.
options		KTRACE		#kernel tracing

# This provides support for System V shared memory.
#
options         SYSVSHM

--------------84314F3EE69FF40ED8BF6071--


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?362EE336.BF7D040B>