Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 09 Apr 2012 08:41:15 -0600
From:      Ian Lepore <freebsd@damnhippie.dyndns.org>
To:        Konstantin Belousov <kostikbel@gmail.com>
Cc:        current@freebsd.org, Warner Losh <imp@bsdimp.com>, drivers@freebsd.org
Subject:   Re: device_attach(9) and driver initialization
Message-ID:  <1333982475.1082.61.camel@revolution.hippie.lan>
In-Reply-To: <20120408035838.GY2358@deviant.kiev.zoral.com.ua>
References:  <20120407125056.GS2358@deviant.kiev.zoral.com.ua> <1333810001.1082.36.camel@revolution.hippie.lan> <20120407145728.GV2358@deviant.kiev.zoral.com.ua> <CCBC36A4-CC13-465B-A151-A41DEDF7E55B@bsdimp.com> <20120408035838.GY2358@deviant.kiev.zoral.com.ua>

next in thread | previous in thread | raw e-mail | index | archive | help
On Sun, 2012-04-08 at 06:58 +0300, Konstantin Belousov wrote:
> On Sat, Apr 07, 2012 at 09:10:55PM -0600, Warner Losh wrote:
> > 
> > On Apr 7, 2012, at 8:57 AM, Konstantin Belousov wrote:
> > 
> > > On Sat, Apr 07, 2012 at 08:46:41AM -0600, Ian Lepore wrote:
> > >> On Sat, 2012-04-07 at 15:50 +0300, Konstantin Belousov wrote:
> > >>> Hello,
> > >>> there seems to be a problem with device attach sequence offered by newbus.
> > >>> Basically, when device attach method is executing, device is not fully
> > >>> initialized yet. Also the device state in the newbus part of the world
> > >>> is DS_ALIVE. There is definitely no shattering news in the statements,
> > >>> but drivers that e.g. create devfs node to communicate with consumers
> > >>> are prone to a race.
> > >>> 
> > >>> If /dev node is created inside device attach method, then usermode
> > >>> can start calling cdevsw methods before device fully initialized itself.
> > >>> Even more, if device tries to use newbus helpers in cdevsw methods,
> > >>> like device_busy(9), then panic occurs "called for unatteched device".
> > >>> I get reports from users about this issues, to it is not something
> > >>> that only could happen.
> > >>> 
> > >>> I propose to add DEVICE_AFTER_ATTACH() driver method, to be called
> > >>> from newbus right after device attach finished and newbus considers
> > >>> the device fully initialized. Driver then could create devfs node
> > >>> in the after_attach method instead of attach. Please see the patch below.
> > >>> 
> > >>> diff --git a/sys/kern/device_if.m b/sys/kern/device_if.m
> > >>> index eb720eb..9db74e2 100644
> > >>> --- a/sys/kern/device_if.m
> > >>> +++ b/sys/kern/device_if.m
> > >>> @@ -43,6 +43,10 @@ INTERFACE device;
> > >>> # Default implementations of some methods.
> > >>> #
> > >>> CODE {
> > >>> +	static void null_after_attach(device_t dev)
> > >>> +	{
> > >>> +	}
> > >>> +
> > >>> 	static int null_shutdown(device_t dev)
> > >>> 	{
> > >>> 	    return 0;
> > >>> @@ -199,6 +203,21 @@ METHOD int attach {
> > >>> };
> > >>> 
> > >>> /**
> > >>> + * @brief Notify the driver that device is in attached state
> > >>> + *
> > >>> + * Called after driver is successfully attached to the device and
> > >>> + * corresponding device_t is fully operational. Driver now may expose
> > >>> + * the device to the consumers, e.g. create devfs nodes.
> > >>> + *
> > >>> + * @param dev		the device to probe
> > >>> + *
> > >>> + * @see DEVICE_ATTACH()
> > >>> + */
> > >>> +METHOD void after_attach {
> > >>> +	device_t dev;
> > >>> +} DEFAULT null_after_attach;
> > >>> +
> > >>> +/**
> > >>>  * @brief Detach a driver from a device.
> > >>>  *
> > >>>  * This can be called if the user is replacing the
> > >>> diff --git a/sys/kern/subr_bus.c b/sys/kern/subr_bus.c
> > >>> index d485b9f..6d849cb 100644
> > >>> --- a/sys/kern/subr_bus.c
> > >>> +++ b/sys/kern/subr_bus.c
> > >>> @@ -2743,6 +2743,7 @@ device_attach(device_t dev)
> > >>> 	dev->state = DS_ATTACHED;
> > >>> 	dev->flags &= ~DF_DONENOMATCH;
> > >>> 	devadded(dev);
> > >>> +	DEVICE_AFTER_ATTACH(dev);
> > >>> 	return (0);
> > >>> }
> > >>> 
> > >> 
> > >> Does device_get_softc() work before attach is completed?  (I don't have
> > >> time to go look in the code right now).  If so, then a mutex initialized
> > >> and acquired early in the driver's attach routine, and also acquired in
> > >> the driver's cdev implementation routines before using any newbus
> > >> functions other than device_get_softc(), would solve the problem without
> > >> a driver api change that would make it harder to backport/MFC driver
> > >> changes.
> > > No, 'a mutex' does not solve anything. It only adds enourmous burden
> > > on the driver developers, because you cannot sleep under mutex. Changing
> > > the mutex to the sleepable lock also does not byy you much, since
> > > you need to somehow solve the issues with some cdevsw call waking up
> > > thread sleeping into another cdevsw call, just for example.
> > > 
> > > Singlethreading a driver due to this race is just silly.
> > > 
> > > And, what do you mean by 'making it harder to MFC' ? How ?
> > 
> > driver_attach()
> > {
> > 	...
> > 	softc->flags = 0; // redundant, since softc is initialized to 0.
> > 	softc->cdev = device_create...();
> > 	...
> > 	softc->flags |= READY;
> > }
> > 
> > driver_open(...)
> > {
> > 	if (!(softc->flags & READY))
> > 		return ENXIO;
> > 	...
> > }
> > 
> > What's the big burden here?
> The burden is that your proposal does not work. As I described above,
> device_busy() calls from cdevsw method panic if open() is called before
> DS_ATTACHED is set by newbus. And, DS_ATTACHED is only set after device
> attach() method returned, so no workarounds from attach() could solve
> this.

One thing that keeps floating to the front of my brain is that all the
proposals so far (including my not-well-thought-out mutex suggestion)
requires changing every existing driver to get the new safe behavior.

Hmmm.  Looking at the code, not very many drivers call device_busy().
Why is that?  

I agree that calling device_create() should be deferred until the driver
is ready to handle requests.  That's only part of the fix if the newbus
support routines are still going to have a window where they can panic
because the internal state variables haven't yet transitioned to the
correct state.  

Also, the implementation of device_busy() looks to be unsafe unless it's
being implicitly protected by some locking in a call chain that isn't
jumping out at me with simple grepping of the code.  For example,
concurrent callers in a device's open() and close() methods for a driver
that calls busy/unbusy from cdev open/close could leave the parent
device's busy count in an indeterminate state.  Could fixing this by
enforcing single threading through busy/unbusy provide an opportunity to
fix the original problem by having the attach code acquire the same
lock, so that an early call to a cdev method that invokes device_busy()
ends up sleeping until the attach routine returns?  That way you don't
single-thread the whole cdev open/close handling, just the part that's
currently causing a problem.

-- Ian





Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1333982475.1082.61.camel>