Date: Mon, 14 Apr 2008 17:15:39 +0200 From: usleepless@gmail.com To: Hansa <mythtv@logic-q.nl> Cc: freebsd-multimedia@freebsd.org Subject: Re: pvr-xxx on 7.0 Message-ID: <c39ec84c0804140815h73d28e07s708108dae156027c@mail.gmail.com> In-Reply-To: <MKEKIEMCICOPMNPAOBMEEENEDAAA.mythtv@logic-q.nl> References: <c39ec84c0804110805s384d34b8x705786e48038dd40@mail.gmail.com> <MKEKIEMCICOPMNPAOBMEEENEDAAA.mythtv@logic-q.nl>
next in thread | previous in thread | raw e-mail | index | archive | help
On Mon, Apr 14, 2008 at 3:42 PM, Hansa <mythtv@logic-q.nl> wrote: > Any chance this is going to work in FreeBSD 6.2? do not top-post plz. > > -----Oorspronkelijk bericht----- > > Van: owner-freebsd-multimedia@freebsd.org > > [mailto:owner-freebsd-multimedia@freebsd.org]Namens usleepless@gmail.com > > Verzonden: vrijdag 11 april 2008 17:05 > > Aan: Kevin Downey > > CC: freebsd-multimedia@freebsd.org; Mike Tancsa > > Onderwerp: Re: pvr-xxx on 7.0 > > > > > > > > > the port from http://usleepless.110mb.com/pvrxxx_port.tgz automagically > > > downloads all the firmware stuff, but I believe you need to > > run "make makesum" > > > because the distinfo file is out of date. > > > > the port is updated @ http://usleepless.110mb.com/pvrxxx_port.tgz > > > > - should build flawless on 7.0 > > - now unloads firmware-kld-modules > > - "make makesum" should not be necessary > > - should be able to switch back from svga/composite to tuner > > - added 3:2 pulldown control in pvr250-setchannel to see if it makes a > > difference for anybody > > > > i observed something strange on 7.0 with this driver. mplayer is now > > able to sync a/v properly when doing "mplayer /dev/cxm0". i would like > > to hear from others about this. > > > > regards, > > > > usleepless > > > > _______________________________________________ > > freebsd-multimedia@freebsd.org mailing list > > http://lists.freebsd.org/mailman/listinfo/freebsd-multimedia > > To unsubscribe, send any mail to > > "freebsd-multimedia-unsubscribe@freebsd.org" > > regards, usleep
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?c39ec84c0804140815h73d28e07s708108dae156027c>