Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 26 Dec 2001 13:21:42 +0100 (CET)
From:      Christoph Kukulies <kuku@gilberto.physik.rwth-aachen.de>
To:        freebsd-current@freebsd.org
Subject:   delock pccard to pci adapter
Message-ID:  <200112261221.fBQCLg968703@gilberto.physik.rwth-aachen.de>

next in thread | raw e-mail | index | archive | help
I probablz made the mistake not to look into the
hardware compatibility list when buying this card
to build a wireless access point using an ELSA
Airlancer MC-11 PCMCIA with tis DeLock (www.delock.de)

Any clues to get it working with a FreeBSD 4.4R?

:r ls
:r l
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 4.4-RELEASE #10: Wed Dec 26 10:38:18 CET 2001
    kuku@kukulies.dynip.de:/usr/src/sys/compile/BGATEI4B
Timecounter "i8254"  frequency 1193182 Hz
CPU: AMD Am5x86 Write-Through (486-class CPU)
  Origin = "AuthenticAMD"  Id = 0x4e4  Stepping = 4
  Features=0x1<FPU>
real memory  = 67108864 (65536K bytes)
avail memory = 62201856 (60744K bytes)
Preloaded elf kernel "kernel" at 0xc0314000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc031409c.
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0 on motherboard
pci0: <PCI bus> on pcib0
chip0: <Intel 82424ZX (Saturn) cache DRAM controller> at device 0.0 on pci0
ncr0: <ncr 53c810 fast10 scsi> port 0xe800-0xe8ff mem 0xfafef000-0xfafef0ff irq 9 at device 1.0 on pci0
isab0: <Intel 82378ZB PCI to ISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
de0: <Digital 21041 Ethernet> port 0xe400-0xe47f mem 0xfafee000-0xfafee07f irq 10 at device 4.0 on pci0
de0: SMC 21041 [10Mb/s] pass 2.1
de0: address 00:e0:29:0b:7a:4e
pci0: <Matrox MGA Millennium 2064W graphics accelerator> at 5.0 irq 11
chip1: <PCI to CardBus bridge (vendor=1180 device=0475)> irq 12 at device 6.0 on pci0
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xe8000-0xebfff,0xec000-0xeffff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <8 virtual consoles, flags=0x200>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 flags 0x10 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
pcfclock0: <PCF-1.0> on ppbus0
ppi0: <Parallel I/O> on ppbus0
pps0: <Pulse per second Timing Interface> on ppbus0
plip0: <PLIP network interface> on ppbus0
ed0 at port 0x280-0x29f iomem 0xcc000-0xcffff irq 5 on isa0
ed0: address 00:00:c0:d2:c2:9e, type SMC8216/SMC8216C (16 bit) 
de0: enabling 10baseT port
IP packet filtering initialized, divert enabled, rule-based forwarding disabled, default to deny, logging limited to 100 packets/entry by default
ad0: 6149MB <WDC AC26400R> [13328/15/63] at ata0-master BIOSPIO
Waiting 4 seconds for SCSI devices to settle
Mounting root from ufs:/dev/ad0s1a
da0 at ncr0 bus 0 target 0 lun 0
da0: <QUANTUM MAVERICK 540S 0901> Fixed Direct Access SCSI-2 device 
da0: 10.000MB/s transfers (10.000MHz, offset 8)
da0: 516MB (1057758 512 byte sectors: 64H 32S/T 516C)

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200112261221.fBQCLg968703>