Date: Sat, 9 Jan 2010 21:43:23 +0900 From: Hashimoto <hsmtkk@gmail.com> To: freebsd-questions@freebsd.org Subject: Inserting PC card NIC, system stops Message-ID: <6bae2c431001090443h40bb2f65md7a2d531db9c9a48@mail.gmail.com>
next in thread | raw e-mail | index | archive | help
Hello.
I have a problem with a PC card Ethernet interface.
When I insert the PC card to my laptop,
the system hungs and makes no response.
When I eject the card,
the system starts again and works fine.
(working
-> insert the card
stopping
-> eject the card
working)
Of course, I cannot use this card for network interface.
(ifconfig command does not show this interface.)
Are there some workarounds to work this card correctly?
Regards.
<PC Card>
Corega CG-LAPCCTXD
$ uname -a
FreeBSD musca.localdomain 8.0-RELEASE-p2 FreeBSD 8.0-RELEASE-p2 #0
r201741: Fri Jan 8 01:01:18 JST 2010
root@aries.localdomain:/usr/obj/usr/src/sys/GENERIC i386
<insert PC card and eject it>
$ tail /var/log/messages
Jan 9 21:29:12 musca kernel: cbb1: ready never happened, status = 00
Jan 9 21:29:12 musca kernel: ed0: <corega K.K. (CG-LAPCCTXD)> at port
0x100-0x11f irq 11 function 0 config 32 on pccard1
Jan 9 21:29:12 musca kernel: Novell probe generic 6
Jan 9 21:29:12 musca kernel: device_attach: ed0 attach returned 6
$ dmesg
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-RELEASE-p2 #0 r201741: Fri Jan 8 01:01:18 JST 2010
root@aries.localdomain:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Mobile AMD Duron(tm) Processor (847.43-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x670 Stepping = 0
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
AMD Features=0xc0440800<SYSCALL,<b18>,MMX+,3DNow!+,3DNow!>
real memory = 134217728 (128 MB)
avail memory = 100007936 (95 MB)
kbd1 at kbdmux0
acpi0: <INSYDE RSDT_000> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x5> port 0x62,0x66 on acpi0
acpi_button0: <Sleep Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci_link2: BIOS IRQ 11 for 0.11.INTA is invalid
pci0: <ACPI PCI bus> on pcib0
agp0: <VIA 82C8363 (Apollo KT133x/KM133) host to PCI bridge> on hostb0
agp0: aperture size is 256M
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> mem
0xe0000000-0xe007ffff,0x90000000-0x97ffffff irq 10 at device 0.0 on
pci1
cbb0: <TI1420 PCI-CardBus Bridge> at device 8.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [FILTER]
cbb1: <TI1420 PCI-CardBus Bridge> at device 8.1 on pci0
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
cbb1: [FILTER]
fwohci0: <NEC uPD72871/2> mem 0xf0001000-0xf0001fff irq 5 at device 11.0 on pci0
fwohci0: [ITHREAD]
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:40:d0:01:00:01:be:36
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 1024 bytes.
fwohci0: max_rec 1024 -> 2048
firewire0: <IEEE1394(FireWire) bus> on fwohci0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x10a4000
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:40:d0:01:be:36
fwe0: Ethernet address: 02:40:d0:01:be:36
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: 00:40:d0:01:00:01:be:36 @ 0xfffe00000000,
S400, maxrec 2048
fwohci0: Initiate bus reset
fwohci0: fwohci_intr_core: BUS reset
fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, CYCLEMASTER mode
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 8231 UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1100-0x110f at device 17.1 on
pci0
atapci0: Correcting VIA config for southbridge data corruption bug
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
uhci0: <VIA 83C572 USB controller> port 0x1200-0x121f irq 10 at device
17.2 on pci0
uhci0: [ITHREAD]
uhci0: LegSup = 0x8030
usbus0: <VIA 83C572 USB controller> on uhci0
uhci1: <VIA 83C572 USB controller> port 0x1300-0x131f irq 10 at device
17.3 on pci0
uhci1: [ITHREAD]
uhci1: LegSup = 0xa030
usbus1: <VIA 83C572 USB controller> on uhci1
pci0: <bridge> at device 17.4 (no driver attached)
pci0: <multimedia, audio> at device 17.5 (no driver attached)
pci0: <simple comms> at device 17.6 (no driver attached)
vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xe800-0xe8ff mem
0xf0000000-0xf00000ff irq 10 at device 18.0 on pci0
vr0: Quirks: 0x0
vr0: Revision: 0x51
miibus0: <MII bus> on vr0
smcphy0: <SMSC LAN83C183 10/100 media interface> PHY 1 on miibus0
smcphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr0: Ethernet address: 00:40:d0:1d:3d:83
vr0: [ITHREAD]
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model GlidePoint, device ID 0
atrtc0: <AT realtime clock> port 0x70-0x75 irq 8 on acpi0
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FILTER]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppc0: [ITHREAD]
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: [ITHREAD]
lpt0: <Printer> on ppbus0
lpt0: [ITHREAD]
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
cpu0: <ACPI CPU> on acpi0
powernow0: <PowerNow! K7> on cpu0
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem
0xc0000-0xcbfff,0xe0000-0xe0fff,0xe6000-0xe6fff,0xeb000-0xeffff pnpid
ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 847429537 Hz quality 800
Timecounters tick every 1.000 msec
firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
firewire0: bus manager 0
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
ad0: 19077MB <IC25N020ATCS04 0 CA2OA74A> at ata0-master UDMA100
ugen0.1: <VIA> at usbus0
uhub0: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <VIA> at usbus1
uhub1: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
acd0: CDRW <UJDA710/1.50> at ata1-master UDMA33
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
Trying to mount root from ufs:/dev/ad0s1a
--
Kouki Hashimoto
hsmtkk@gmail.com
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?6bae2c431001090443h40bb2f65md7a2d531db9c9a48>