Date: Tue, 27 Jun 2006 10:24:03 -0400 From: Vivek Khera <vivek@khera.org> To: Pete French <petefrench@ticketswitch.com> Cc: freebsd-amd64@freebsd.org Subject: Re: SMP system not running SMP Message-ID: <E8BDC013-C9DD-4913-BF45-1022F1BB81BC@khera.org> In-Reply-To: <E1FvEDL-000A7v-BH@dilbert.firstcallgroup.co.uk> References: <E1FvEDL-000A7v-BH@dilbert.firstcallgroup.co.uk>
next in thread | previous in thread | raw e-mail | index | archive | help
--Apple-Mail-11--835131565
Content-Type: multipart/mixed;
boundary=Apple-Mail-10--835131701
--Apple-Mail-10--835131701
Content-Transfer-Encoding: 7bit
Content-Type: text/plain;
charset=US-ASCII;
format=flowed
On Jun 27, 2006, at 10:06 AM, Pete French wrote:
>> Sun Fire X4100 dual opteron, Adaptec 2230 SLP PCI-X card attached to
>> 14-disk U320 disk array. FreeBSD 6.0-REL. Running non-stop since
>> January as a busy postgresql server. I'm buying another one this
>> week since they're so stable.
>
> Whats the motherboard and chipset ? The problem only seems to
> happen on those 8111 / 8131 based boards - if it's one of those
> and it runs then I'd be extremely interested!
No clue. Here's the dmesg if it provides you clues:
--Apple-Mail-10--835131701
Content-Transfer-Encoding: 7bit
Content-Type: application/octet-stream;
x-unix-mode=0644;
name="dmesg.boot"
Content-Disposition: attachment;
filename=dmesg.boot
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.0-RELEASE-p4 #0: Fri Jan 27 13:43:53 EST 2006
vivek@rt.m1e.net:/n/lorax1/usr6/obj.amd64/n/lorax1/usr6/src/sys/KCI64SMP
ACPI APIC Table: <SUN X4100 >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Opteron(tm) Processor 254 (2792.06-MHz K8-class CPU)
Origin = "AuthenticAMD" Id = 0x20f51 Stepping = 1
Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
Features2=0x1<SSE3>
AMD Features=0xe2500800<SYSCALL,NX,MMX+,<b25>,LM,3DNow+,3DNow>
real memory = 4932501504 (4704 MB)
avail memory = 3964747776 (3781 MB)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0 <Version 1.1> irqs 0-23 on motherboard
ioapic1 <Version 1.1> irqs 24-27 on motherboard
ioapic2 <Version 1.1> irqs 28-31 on motherboard
ioapic3 <Version 1.1> irqs 32-35 on motherboard
ioapic4 <Version 1.1> irqs 36-39 on motherboard
acpi0: <SUN X4100> on motherboard
acpi0: Power Button (fixed)
pci_link0: <ACPI PCI Link LNKA> irq 10 on acpi0
pci_link1: <ACPI PCI Link LNKB> irq 9 on acpi0
pci_link2: <ACPI PCI Link LNKC> irq 11 on acpi0
pci_link3: <ACPI PCI Link LNKD> irq 11 on acpi0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x5008-0x500b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
cpu1: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
em0: <Intel(R) PRO/1000 Network Connection, Version - 2.1.7> port 0x9c00-0x9c3f mem 0xdade0000-0xdadfffff irq 26 at device 1.0 on pci1
em0: Ethernet address: 00:14:4f:01:54:00
em0: Speed:N/A Duplex:N/A
em1: <Intel(R) PRO/1000 Network Connection, Version - 2.1.7> port 0x9800-0x983f mem 0xdadc0000-0xdaddffff irq 27 at device 1.1 on pci1
em1: Ethernet address: 00:14:4f:01:54:01
em1: Speed:N/A Duplex:N/A
em2: <Intel(R) PRO/1000 Network Connection, Version - 2.1.7> port 0x9400-0x943f mem 0xdada0000-0xdadbffff irq 24 at device 2.0 on pci1
em2: Ethernet address: 00:14:4f:01:54:02
em2: Speed:N/A Duplex:N/A
em3: <Intel(R) PRO/1000 Network Connection, Version - 2.1.7> port 0x9000-0x903f mem 0xdad80000-0xdad9ffff irq 25 at device 2.1 on pci1
em3: Ethernet address: 00:14:4f:01:54:03
em3: Speed:N/A Duplex:N/A
pci0: <base peripheral, interrupt controller> at device 1.1 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pci2: <mass storage, SCSI> at device 3.0 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 2.1 (no driver attached)
pcib3: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci3: <ACPI PCI bus> on pcib3
ohci0: <OHCI (generic) USB controller> mem 0xdd3fe000-0xdd3fefff irq 19 at device 0.0 on pci3
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1: <OHCI (generic) USB controller> mem 0xdd3fd000-0xdd3fdfff irq 19 at device 0.1 on pci3
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
pci3: <display, VGA> at device 3.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <AMD 8111 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 7.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pci0: <serial bus, SMBus> at device 7.2 (no driver attached)
pci0: <bridge> at device 7.3 (no driver attached)
pcib4: <ACPI Host-PCI bridge> on acpi0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 1.0 on pci4
pci5: <ACPI PCI bus> on pcib5
pci4: <base peripheral, interrupt controller> at device 1.1 (no driver attached)
pcib6: <ACPI PCI-PCI bridge> at device 2.0 on pci4
pci6: <ACPI PCI bus> on pcib6
aac0: <Adaptec SCSI RAID 2230S> mem 0xfe000000-0xfe7fffff,0xe0000000-0xefffffff irq 37 at device 1.0 on pci6
aac0: Enabling 64-bit address support
aac0: New comm. interface enabled
aac0: Adaptec Raid Controller 2.0.0-1
aacp0: <SCSI Passthrough Bus> on aac0
aacp1: <SCSI Passthrough Bus> on aac0
pci4: <base peripheral, interrupt controller> at device 2.1 (no driver attached)
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A, console
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc9fff,0xca000-0xce7ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
ukbd0: DELL DELL USB Keyboard, rev 1.10/1.04, addr 2, iclass 3/1
kbd0 at ukbd0
ukbd1: American Megatrends Inc. Virtual Keyboard and Mouse, rev 1.10/1.00, addr 3, iclass 3/1
kbd1 at ukbd1
Timecounters tick every 1.000 msec
ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding disabled, default to accept, logging unlimited
acd0: DVDROM <DV-28SL/1.0A> at ata0-master UDMA33
aacd0: <RAID 1 (Mirror)> on aac0
aacd0: 34699MB (71065344 sectors)
aacd1: <RAID 0/1> on aac0
aacd1: 208194MB (426381312 sectors)
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/aacd0s1a
em0: link state changed to UP
--Apple-Mail-10--835131701--
--Apple-Mail-11--835131565--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?E8BDC013-C9DD-4913-BF45-1022F1BB81BC>