Date: Fri, 16 Oct 2009 13:27:13 GMT From: Alexander Shevchenko <pepelac@gmail.com> To: freebsd-gnats-submit@FreeBSD.org Subject: www/139679: Intel S5520SC Message-ID: <200910161327.n9GDRDsX045420@www.freebsd.org> Resent-Message-ID: <200910161330.n9GDU6qJ054963@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 139679
>Category: www
>Synopsis: Intel S5520SC
>Confidential: no
>Severity: non-critical
>Priority: low
>Responsible: freebsd-www
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: update
>Submitter-Id: current-users
>Arrival-Date: Fri Oct 16 13:30:06 UTC 2009
>Closed-Date:
>Last-Modified:
>Originator: Alexander Shevchenko
>Release: FreeBSD 8.0-RC1
>Organization:
>Environment:
>Description:
Intel Board S5520SC - Intel® 5520 chipset with Intel® I/O Controller Hub ICH10R
Software raid(Intel Embedded RAIDII) and onboard NIC's functional. Dmesg, dmesg.verbose, pciconf, ifconfig, ifcongig are below
#dmesg
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-RC1 #0: Thu Sep 17 18:50:57 UTC 2009
root@mason.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(R) CPU E5530 @ 2.40GHz (2399.99-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x106a5 Stepping = 5
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x9ce3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,SSE4.2,POPCNT>
AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant
real memory = 6442450944 (6144 MB)
avail memory = 6086184960 (5804 MB)
ACPI APIC Table: <INTEL S5520SC >
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 SMT threads
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
cpu4 (AP): APIC ID: 4
cpu5 (AP): APIC ID: 5
cpu6 (AP): APIC ID: 6
cpu7 (AP): APIC ID: 7
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
lapic0: Forcing LINT1 to edge trigger
kbd1 at kbdmux0
acpi0: <INTEL S5520SC> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 28 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
igb0: <Intel(R) PRO/1000 Network Connection version - 1.7.3> port 0x2020-0x203f mem 0xc4a20000-0xc4a3ffff,0xc4a44000-0xc4a47fff irq 40 at device 0.0 on pci1
igb0: Using MSIX interrupts with 3 vectors
igb0: [ITHREAD]
igb0: [ITHREAD]
igb0: [ITHREAD]
igb0: Ethernet address: 00:15:17:af:cd:0c
igb1: <Intel(R) PRO/1000 Network Connection version - 1.7.3> port 0x2000-0x201f mem 0xc4a00000-0xc4a1ffff,0xc4a40000-0xc4a43fff irq 28 at device 0.1 on pci1
igb1: Using MSIX interrupts with 3 vectors
igb1: [ITHREAD]
igb1: [ITHREAD]
igb1: [ITHREAD]
igb1: Ethernet address: 00:15:17:af:cd:0d
pcib2: <ACPI PCI-PCI bridge> irq 24 at device 3.0 on pci0
pci2: <ACPI PCI bus> on pcib2
vgapci0: <VGA-compatible display> port 0x1000-0x107f mem 0xc2000000-0xc2ffffff,0xb0000000-0xbfffffff,0xc0000000-0xc1ffffff irq 24 at device 0.0 on pci2
pcib3: <ACPI PCI-PCI bridge> irq 30 at device 7.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pci0: <base peripheral, interrupt controller> at device 16.0 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 16.1 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 17.0 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 17.1 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.0 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.1 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.2 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.3 (no driver attached)
pci0: <base peripheral> at device 22.0 (no driver attached)
pci0: <base peripheral> at device 22.1 (no driver attached)
pci0: <base peripheral> at device 22.2 (no driver attached)
pci0: <base peripheral> at device 22.3 (no driver attached)
pci0: <base peripheral> at device 22.4 (no driver attached)
pci0: <base peripheral> at device 22.5 (no driver attached)
pci0: <base peripheral> at device 22.6 (no driver attached)
pci0: <base peripheral> at device 22.7 (no driver attached)
uhci0: <UHCI (generic) USB controller> port 0x30e0-0x30ff irq 19 at device 26.0 on pci0
uhci0: [ITHREAD]
uhci0: LegSup = 0x103f
usbus0: <UHCI (generic) USB controller> on uhci0
uhci1: <UHCI (generic) USB controller> port 0x30c0-0x30df irq 19 at device 26.1 on pci0
uhci1: [ITHREAD]
uhci1: LegSup = 0x003f
usbus1: <UHCI (generic) USB controller> on uhci1
uhci2: <UHCI (generic) USB controller> port 0x30a0-0x30bf irq 19 at device 26.2 on pci0
uhci2: [ITHREAD]
uhci2: LegSup = 0x003f
usbus2: <UHCI (generic) USB controller> on uhci2
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xc4b26000-0xc4b263ff irq 19 at device 26.7 on pci0
ehci0: [ITHREAD]
usbus3: EHCI version 1.0
usbus3: <EHCI (generic) USB 2.0 controller> on ehci0
pci0: <multimedia, HDA> at device 27.0 (no driver attached)
pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci5: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0
pci6: <ACPI PCI bus> on pcib6
uhci3: <UHCI (generic) USB controller> port 0x3080-0x309f irq 16 at device 29.0 on pci0
uhci3: [ITHREAD]
uhci3: LegSup = 0x003f
usbus4: <UHCI (generic) USB controller> on uhci3
uhci4: <UHCI (generic) USB controller> port 0x3060-0x307f irq 16 at device 29.1 on pci0
uhci4: [ITHREAD]
uhci4: LegSup = 0x003f
usbus5: <UHCI (generic) USB controller> on uhci4
uhci5: <UHCI (generic) USB controller> port 0x3040-0x305f irq 16 at device 29.2 on pci0
uhci5: [ITHREAD]
uhci5: LegSup = 0x003f
usbus6: <UHCI (generic) USB controller> on uhci5
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xc4b25000-0xc4b253ff irq 16 at device 29.7 on pci0
ehci1: [ITHREAD]
usbus7: EHCI version 1.0
usbus7: <EHCI (generic) USB 2.0 controller> on ehci1
pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci7: <ACPI PCI bus> on pcib7
fwohci0: <Texas Instruments TSB43AB22/A> mem 0xc4904000-0xc49047ff,0xc4900000-0xc4903fff irq 17 at device 1.0 on pci7
fwohci0: [ITHREAD]
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:90:27:00:02:58:ce:0c
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x173c000
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:90:27:58:ce:0c
fwe0: Ethernet address: 02:90:27:58:ce:0c
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: 00:90:27:00:02:58:ce:0c @ 0xfffe00000000, S400, maxrec 2048
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: fwohci_intr_core: BUS reset
fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, CYCLEMASTER mode
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH10 SATA300 controller> port 0x3108-0x310f,0x3114-0x3117,0x3100-0x3107,0x3110-0x3113,0x3020-0x303f mem 0xc4b24000-0xc4b247ff irq 18 at device 31.2 on pci0
atapci0: [ITHREAD]
atapci0: AHCI called from vendor specific driver
atapci0: AHCI v1.20 controller with 6 3Gbps ports, PM not supported
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
ata4: <ATA channel 2> on atapci0
ata4: [ITHREAD]
ata5: <ATA channel 3> on atapci0
ata5: [ITHREAD]
ata6: <ATA channel 4> on atapci0
ata6: [ITHREAD]
ata7: <ATA channel 5> on atapci0
ata7: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Sleep Button> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart1: [FILTER]
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
device_attach: acpi_perf1 attach returned 6
device_attach: acpi_perf1 attach returned 6
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 12
device_attach: est1 attach returned 6
p4tcc1: <CPU Frequency Thermal Control> on cpu1
cpu2: <ACPI CPU> on acpi0
est2: <Enhanced SpeedStep Frequency Control> on cpu2
p4tcc2: <CPU Frequency Thermal Control> on cpu2
cpu3: <ACPI CPU> on acpi0
device_attach: acpi_perf3 attach returned 6
device_attach: acpi_perf3 attach returned 6
est3: <Enhanced SpeedStep Frequency Control> on cpu3
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 12
device_attach: est3 attach returned 6
p4tcc3: <CPU Frequency Thermal Control> on cpu3
cpu4: <ACPI CPU> on acpi0
est4: <Enhanced SpeedStep Frequency Control> on cpu4
p4tcc4: <CPU Frequency Thermal Control> on cpu4
cpu5: <ACPI CPU> on acpi0
device_attach: acpi_perf5 attach returned 6
device_attach: acpi_perf5 attach returned 6
est5: <Enhanced SpeedStep Frequency Control> on cpu5
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 12
device_attach: est5 attach returned 6
p4tcc5: <CPU Frequency Thermal Control> on cpu5
cpu6: <ACPI CPU> on acpi0
est6: <Enhanced SpeedStep Frequency Control> on cpu6
p4tcc6: <CPU Frequency Thermal Control> on cpu6
cpu7: <ACPI CPU> on acpi0
device_attach: acpi_perf7 attach returned 6
device_attach: acpi_perf7 attach returned 6
est7: <Enhanced SpeedStep Frequency Control> on cpu7
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 12
device_attach: est7 attach returned 6
p4tcc7: <CPU Frequency Thermal Control> on cpu7
orm0: <ISA Option ROMs> at iomem 0xcd000-0xcdfff,0xce000-0xcefff,0xcf000-0xd4fff on isa0
atkbd: unable to set the command byte.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: unable to set the command byte.
ppc0: cannot reserve I/O port range
Timecounters tick every 1.000 msec
firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
firewire0: bus manager 0
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 12Mbps Full Speed USB v1.0
usbus6: 12Mbps Full Speed USB v1.0
usbus7: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <Intel> at usbus5
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen6.1: <Intel> at usbus6
uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
ugen7.1: <Intel> at usbus7
uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
ad4: 953869MB <Seagate ST31000340NS SN06> at ata2-master SATA150
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub6: 2 ports with 2 removable, self powered
GEOM: ad4s1: geometry does not match label (255h,63s != 16h,63s).
uhub3: 6 ports with 6 removable, self powered
uhub7: 6 ports with 6 removable, self powered
ad6: 953869MB <Seagate ST31000340NS SN06> at ata3-master SATA150
ad8: 953869MB <Seagate ST31000340NS SN06> at ata4-master SATA150
ad10: 953869MB <Seagate ST31000340NS SN06> at ata5-master SATA150
acd0: DVDR <Optiarc DVD RW AD-5240S/1.01> at ata7-master SATA150
ugen4.2: <BTC> at usbus4
ukbd0: <BTC USB Multimedia Keyboard, class 0/0, rev 1.10/1.00, addr 2> on usbus4
kbd2 at ukbd0
uhid0: <BTC USB Multimedia Keyboard, class 0/0, rev 1.10/1.00, addr 2> on usbus4
ar0: writing of DDF metadata is NOT supported yet
ar0: 952720MB <DDF RAID0 (stripe 64 KB)> status: READY
ar0: disk0 READY using ad4 at ata2-master
ar1: writing of DDF metadata is NOT supported yet
ar1: 2858160MB <DDF RAID0 (stripe 64 KB)> status: READY
ar1: disk0 READY using ad6 at ata3-master
ar1: disk1 READY using ad8 at ata4-master
ar1: disk2 READY using ad10 at ata5-master
lapic1: Forcing LINT1 to edge trigger
SMP: AP CPU #1 Launched!
lapic5: Forcing LINT1 to edge trigger
SMP: AP CPU #5 Launched!
lapic3: Forcing LINT1 to edge trigger
SMP: AP CPU #3 Launched!
lapic4: Forcing LINT1 to edge trigger
SMP: AP CPU #4 Launched!
lapic2: Forcing LINT1 to edge trigger
SMP: AP CPU #2 Launched!
lapic6: Forcing LINT1 to edge trigger
SMP: AP CPU #6 Launched!
lapic7: Forcing LINT1 to edge trigger
SMP: AP CPU #7 Launched!
ugen5.2: <No brand> at usbus5
ukbd1: <No brand KVM, class 0/0, rev 1.10/0.00, addr 2> on usbus5
ugen2.2: <American Megatrends Inc.> at usbus2
kbd3 at ukbd1
ukbd2: <Keyboard Interface> on usbus2
kbd4 at ukbd2
ums0: <No brand KVM, class 0/0, rev 1.10/0.00, addr 2> on usbus5
ums1: <Mouse Interface> on usbus2
ums1: 3 buttons and [Z] coordinates ID=0
ums0: 5 buttons and [XYZ] coordinates ID=1
Trying to mount root from ufs:/dev/ar0s1a
ugen5.3: <Logitech> at usbus5
ums2: <Logitech Optical USB Mouse, class 0/0, rev 2.00/3.40, addr 3> on usbus5
ums2: 3 buttons and [XYZ] coordinates ID=0
#dmesg verbose
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-RC1 #0: Thu Sep 17 18:50:57 UTC 2009
root@mason.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff80e22000.
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 2399984204 Hz
CPU: Intel(R) Xeon(R) CPU E5530 @ 2.40GHz (2399.98-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x106a5 Stepping = 5
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x9ce3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,SSE4.2,POPCNT>
AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant
real memory = 6442450944 (6144 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x0000000000090fff, 589824 bytes (144 pages)
0x0000000000e54000 - 0x000000008c238fff, 2336116736 bytes (570341 pages)
0x0000000100000000 - 0x00000001e16c3fff, 3781967872 bytes (923332 pages)
avail memory = 6086184960 (5804 MB)
ACPI APIC Table: <INTEL S5520SC >
INTR: Adding local APIC 1 as a target
INTR: Adding local APIC 2 as a target
INTR: Adding local APIC 3 as a target
INTR: Adding local APIC 4 as a target
INTR: Adding local APIC 5 as a target
INTR: Adding local APIC 6 as a target
INTR: Adding local APIC 7 as a target
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 SMT threads
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
cpu4 (AP): APIC ID: 4
cpu5 (AP): APIC ID: 5
cpu6 (AP): APIC ID: 6
cpu7 (AP): APIC ID: 7
APIC: CPU 0 has ACPI ID 0
APIC: CPU 1 has ACPI ID 8
APIC: CPU 2 has ACPI ID 2
APIC: CPU 3 has ACPI ID 10
APIC: CPU 4 has ACPI ID 4
APIC: CPU 5 has ACPI ID 12
APIC: CPU 6 has ACPI ID 6
APIC: CPU 7 has ACPI ID 14
ULE: setup cpu 0
ULE: setup cpu 1
ULE: setup cpu 2
ULE: setup cpu 3
ULE: setup cpu 4
ULE: setup cpu 5
ULE: setup cpu 6
ULE: setup cpu 7
ACPI: RSDP 0xf03f0 00024 (v2 INTEL )
ACPI: XSDT 0x8f7fe120 00094 (v1 INTEL S5520SC 00000000 01000013)
ACPI: FACP 0x8f7fc000 000F4 (v4 INTEL S5520SC 00000000 MSFT 0100000D)
ACPI: DSDT 0x8f7f5000 060B7 (v2 INTEL S5520SC 00000003 MSFT 0100000D)
ACPI: FACS 0x8f727000 00040
ACPI: APIC 0x8f7f4000 00138 (v2 INTEL S5520SC 00000000 MSFT 0100000D)
ACPI: MCFG 0x8f7f3000 0003C (v1 INTEL S5520SC 00000001 MSFT 0100000D)
ACPI: HPET 0x8f7f2000 00038 (v1 INTEL S5520SC 00000001 MSFT 0100000D)
ACPI: SLIT 0x8f7f1000 00030 (v1 INTEL S5520SC 00000001 MSFT 0100000D)
ACPI: SPCR 0x8f7f0000 00050 (v1 INTEL S5520SC 00000000 MSFT 0100000D)
ACPI: WDDT 0x8f7ef000 00040 (v1 INTEL S5520SC 00000000 MSFT 0100000D)
ACPI: SSDT 0x8f7dd000 11FE4 (v2 INTEL SSDT PM 00004000 INTL 20061109)
ACPI: SSDT 0x8f7dc000 001D8 (v2 INTEL IPMI 00004000 INTL 20061109)
ACPI: TCPA 0x8f7da000 00032 (v0 00000000 00000000)
ACPI: HEST 0x8f7d9000 000A8 (v1 INTEL S5520SC 00000001 INTL 00000001)
ACPI: BERT 0x8f7d8000 00030 (v1 INTEL S5520SC 00000001 INTL 00000001)
ACPI: ERST 0x8f7d7000 00230 (v1 INTEL S5520SC 00000001 INTL 00000001)
ACPI: EINJ 0x8f7d6000 00130 (v1 INTEL S5520SC 00000001 INTL 00000001)
MADT: Found IO APIC ID 8, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
MADT: Found IO APIC ID 9, Interrupt 24 at 0xfec90000
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: level
lapic0: LINT1 polarity: high
MADT: Ignoring local NMI routed to ACPI CPU 1
lapic2: Routing NMI -> LINT1
lapic2: LINT1 trigger: level
lapic2: LINT1 polarity: high
MADT: Ignoring local NMI routed to ACPI CPU 3
lapic4: Routing NMI -> LINT1
lapic4: LINT1 trigger: level
lapic4: LINT1 polarity: high
MADT: Ignoring local NMI routed to ACPI CPU 5
lapic6: Routing NMI -> LINT1
lapic6: LINT1 trigger: level
lapic6: LINT1 polarity: high
MADT: Ignoring local NMI routed to ACPI CPU 7
lapic1: Routing NMI -> LINT1
lapic1: LINT1 trigger: level
lapic1: LINT1 polarity: high
MADT: Ignoring local NMI routed to ACPI CPU 9
lapic3: Routing NMI -> LINT1
lapic3: LINT1 trigger: level
lapic3: LINT1 polarity: high
MADT: Ignoring local NMI routed to ACPI CPU 11
lapic5: Routing NMI -> LINT1
lapic5: LINT1 trigger: level
lapic5: LINT1 polarity: high
MADT: Ignoring local NMI routed to ACPI CPU 13
lapic7: Routing NMI -> LINT1
lapic7: LINT1 trigger: level
lapic7: LINT1 polarity: high
MADT: Ignoring local NMI routed to ACPI CPU 15
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
lapic0: Forcing LINT1 to edge trigger
cpu0 BSP:
ID: 0x00000000 VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00008400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400
wlan: <802.11 Link Layer>
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
io: <I/O>
hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2
acpi0: <INTEL S5520SC> on motherboard
PCIe: Memory Mapped configuration base @ 0xa0000000
ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48
acpi0: [MPSAFE]
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: wakeup code va 0xffffff8000017000 pa 0x4000
AcpiOsDerivePciId: \\_SB_.PCI0.PAMX -> bus 0 dev 0 func 0
AcpiOsDerivePciId: \\_SB_.PCI0.LPC0.PRR0 -> bus 0 dev 31 func 0
AcpiOsDerivePciId: \\_SB_.PCI0.LPC0.PRR1 -> bus 0 dev 31 func 0
ACPI timer: 1/0 1/0 1/0 1/1 1/0 1/0 1/1 1/0 1/1 1/0 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pci_link0: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 3 4 5 6 7 9 10 11 12 14 15
Validation 0 11 N 0 3 4 5 6 7 9 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link1: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 3 4 5 6 7 9 10 11 12 14 15
Validation 0 10 N 0 3 4 5 6 7 9 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link2: Index IRQ Rtd Ref IRQs
Initial Probe 0 9 N 0 3 4 5 6 7 9 10 11 12 14 15
Validation 0 9 N 0 3 4 5 6 7 9 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link3: Index IRQ Rtd Ref IRQs
Initial Probe 0 5 N 0 3 4 5 6 7 9 10 11 12 14 15
Validation 0 5 N 0 3 4 5 6 7 9 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link4: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
Validation 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link5: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
Validation 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link6: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 3 4 5 6 7 9 10 11 12 14 15
Validation 0 11 N 0 3 4 5 6 7 9 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link7: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
Validation 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
acpi_hpet0: vend: 0x8086 rev: 0x1 num: 3 hz: 14318180 opts: legacy_route 64-bit
Timecounter "HPET" frequency 14318180 Hz quality 900
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x8086, dev=0x3406, revid=0x13
domain=0, bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0140, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 3 supports D0 D3 current D0
MSI supports 2 messages, vector masks
pcib0: matched entry for 0.0.INTA
pcib0: slot 0 INTA hardwired to IRQ 47
found-> vendor=0x8086, dev=0x3408, revid=0x13
domain=0, bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 3 supports D0 D3 current D0
MSI supports 2 messages, vector masks
pcib0: matched entry for 0.1.INTA
pcib0: slot 1 INTA hardwired to IRQ 28
found-> vendor=0x8086, dev=0x340a, revid=0x13
domain=0, bus=0, slot=3, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x1b (6750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 3 supports D0 D3 current D0
MSI supports 2 messages, vector masks
pcib0: matched entry for 0.3.INTA
pcib0: slot 3 INTA hardwired to IRQ 24
found-> vendor=0x8086, dev=0x340e, revid=0x13
domain=0, bus=0, slot=7, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 3 supports D0 D3 current D0
MSI supports 2 messages, vector masks
pcib0: matched entry for 0.7.INTA
pcib0: slot 7 INTA hardwired to IRQ 30
found-> vendor=0x8086, dev=0x3425, revid=0x13
domain=0, bus=0, slot=16, func=0
class=08-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x3426, revid=0x13
domain=0, bus=0, slot=16, func=1
class=08-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x3427, revid=0x13
domain=0, bus=0, slot=17, func=0
class=08-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x3428, revid=0x13
domain=0, bus=0, slot=17, func=1
class=08-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x342d, revid=0x13
domain=0, bus=0, slot=19, func=0
class=08-00-20, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 3 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xc4b28000, size 12, enabled
found-> vendor=0x8086, dev=0x342e, revid=0x13
domain=0, bus=0, slot=20, func=0
class=08-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x3422, revid=0x13
domain=0, bus=0, slot=20, func=1
class=08-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x3423, revid=0x13
domain=0, bus=0, slot=20, func=2
class=08-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x3438, revid=0x13
domain=0, bus=0, slot=20, func=3
class=08-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x342f, revid=0x13
domain=0, bus=0, slot=21, func=0
class=08-00-20, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x3430, revid=0x13
domain=0, bus=0, slot=22, func=0
class=08-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 3 supports D0 D3 current D0
MSI-X supports 1 message in map 0x10
map[10]: type Memory, range 64, base 0xc4b00000, size 14, enabled
pcib0: matched entry for 0.22.INTA
pcib0: slot 22 INTA hardwired to IRQ 43
found-> vendor=0x8086, dev=0x3431, revid=0x13
domain=0, bus=0, slot=22, func=1
class=08-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
powerspec 3 supports D0 D3 current D0
MSI-X supports 1 message in map 0x10
map[10]: type Memory, range 64, base 0xc4b04000, size 14, enabled
pcib0: matched entry for 0.22.INTB
pcib0: slot 22 INTB hardwired to IRQ 44
found-> vendor=0x8086, dev=0x3432, revid=0x13
domain=0, bus=0, slot=22, func=2
class=08-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=9
powerspec 3 supports D0 D3 current D0
MSI-X supports 1 message in map 0x10
map[10]: type Memory, range 64, base 0xc4b08000, size 14, enabled
pcib0: matched entry for 0.22.INTC
pcib0: slot 22 INTC hardwired to IRQ 45
found-> vendor=0x8086, dev=0x3433, revid=0x13
domain=0, bus=0, slot=22, func=3
class=08-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=5
powerspec 3 supports D0 D3 current D0
MSI-X supports 1 message in map 0x10
map[10]: type Memory, range 64, base 0xc4b0c000, size 14, enabled
pcib0: matched entry for 0.22.INTD
pcib0: slot 22 INTD hardwired to IRQ 46
found-> vendor=0x8086, dev=0x3429, revid=0x13
domain=0, bus=0, slot=22, func=4
class=08-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 3 supports D0 D3 current D0
MSI-X supports 1 message in map 0x10
map[10]: type Memory, range 64, base 0xc4b10000, size 14, enabled
pcib0: matched entry for 0.22.INTA
pcib0: slot 22 INTA hardwired to IRQ 43
found-> vendor=0x8086, dev=0x342a, revid=0x13
domain=0, bus=0, slot=22, func=5
class=08-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
powerspec 3 supports D0 D3 current D0
MSI-X supports 1 message in map 0x10
map[10]: type Memory, range 64, base 0xc4b14000, size 14, enabled
pcib0: matched entry for 0.22.INTB
pcib0: slot 22 INTB hardwired to IRQ 44
found-> vendor=0x8086, dev=0x342b, revid=0x13
domain=0, bus=0, slot=22, func=6
class=08-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=9
powerspec 3 supports D0 D3 current D0
MSI-X supports 1 message in map 0x10
map[10]: type Memory, range 64, base 0xc4b18000, size 14, enabled
pcib0: matched entry for 0.22.INTC
pcib0: slot 22 INTC hardwired to IRQ 45
found-> vendor=0x8086, dev=0x342c, revid=0x13
domain=0, bus=0, slot=22, func=7
class=08-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=5
powerspec 3 supports D0 D3 current D0
MSI-X supports 1 message in map 0x10
map[10]: type Memory, range 64, base 0xc4b1c000, size 14, enabled
pcib0: matched entry for 0.22.INTD
pcib0: slot 22 INTD hardwired to IRQ 46
found-> vendor=0x8086, dev=0x3a37, revid=0x00
domain=0, bus=0, slot=26, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=5
map[20]: type I/O Port, range 32, base 0x30e0, size 5, enabled
pcib0: matched entry for 0.26.INTD
pcib0: slot 26 INTD hardwired to IRQ 19
found-> vendor=0x8086, dev=0x3a38, revid=0x00
domain=0, bus=0, slot=26, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=5
map[20]: type I/O Port, range 32, base 0x30c0, size 5, enabled
pcib0: matched entry for 0.26.INTD
pcib0: slot 26 INTD hardwired to IRQ 19
found-> vendor=0x8086, dev=0x3a39, revid=0x00
domain=0, bus=0, slot=26, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=5
map[20]: type I/O Port, range 32, base 0x30a0, size 5, enabled
pcib0: matched entry for 0.26.INTD
pcib0: slot 26 INTD hardwired to IRQ 19
found-> vendor=0x8086, dev=0x3a3c, revid=0x00
domain=0, bus=0, slot=26, func=7
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0146, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=5
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xc4b26000, size 10, enabled
pcib0: matched entry for 0.26.INTD
pcib0: slot 26 INTD hardwired to IRQ 19
found-> vendor=0x8086, dev=0x3a3e, revid=0x00
domain=0, bus=0, slot=27, func=0
class=04-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 64, base 0xc4b20000, size 14, enabled
pcib0: matched entry for 0.27.INTA
pcib0: slot 27 INTA hardwired to IRQ 22
found-> vendor=0x8086, dev=0x3a40, revid=0x00
domain=0, bus=0, slot=28, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.28.INTA
pcib0: slot 28 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x3a48, revid=0x00
domain=0, bus=0, slot=28, func=4
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.28.INTA
pcib0: slot 28 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x3a4a, revid=0x00
domain=0, bus=0, slot=28, func=5
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
pcib0: matched entry for 0.28.INTB
pcib0: slot 28 INTB hardwired to IRQ 17
found-> vendor=0x8086, dev=0x3a34, revid=0x00
domain=0, bus=0, slot=29, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=11
map[20]: type I/O Port, range 32, base 0x3080, size 5, enabled
pcib0: matched entry for 0.29.INTD
pcib0: slot 29 INTD hardwired to IRQ 16
found-> vendor=0x8086, dev=0x3a35, revid=0x00
domain=0, bus=0, slot=29, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=11
map[20]: type I/O Port, range 32, base 0x3060, size 5, enabled
pcib0: matched entry for 0.29.INTD
pcib0: slot 29 INTD hardwired to IRQ 16
found-> vendor=0x8086, dev=0x3a36, revid=0x00
domain=0, bus=0, slot=29, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=11
map[20]: type I/O Port, range 32, base 0x3040, size 5, enabled
pcib0: matched entry for 0.29.INTD
pcib0: slot 29 INTD hardwired to IRQ 16
found-> vendor=0x8086, dev=0x3a3a, revid=0x00
domain=0, bus=0, slot=29, func=7
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0146, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=11
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 32, base 0xc4b25000, size 10, enabled
pcib0: matched entry for 0.29.INTD
pcib0: slot 29 INTD hardwired to IRQ 16
found-> vendor=0x8086, dev=0x244e, revid=0x90
domain=0, bus=0, slot=30, func=0
class=06-04-01, hdrtype=0x01, mfdev=0
cmdreg=0x0147, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x0a (2500 ns)
found-> vendor=0x8086, dev=0x3a16, revid=0x00
domain=0, bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0147, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x3a25, revid=0x00
domain=0, bus=0, slot=31, func=2
class=01-04-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=9
powerspec 3 supports D0 D3 current D0
MSI supports 16 messages
map[10]: type I/O Port, range 32, base 0x3108, size 3, enabled
map[14]: type I/O Port, range 32, base 0x3114, size 2, enabled
map[18]: type I/O Port, range 32, base 0x3100, size 3, enabled
map[1c]: type I/O Port, range 32, base 0x3110, size 2, enabled
map[20]: type I/O Port, range 32, base 0x3020, size 5, enabled
map[24]: type Memory, range 32, base 0xc4b24000, size 11, enabled
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 18
found-> vendor=0x8086, dev=0x3a30, revid=0x00
domain=0, bus=0, slot=31, func=3
class=0c-05-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=9
map[10]: type Memory, range 64, base 0xc4b27000, size 8, enabled
map[20]: type I/O Port, range 32, base 0x3000, size 5, enabled
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 18
pcib1: <ACPI PCI-PCI bridge> irq 28 at device 1.0 on pci0
pcib1: domain 0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0x2000-0x2fff
pcib1: memory decode 0xc4a00000-0xc4afffff
pcib1: no prefetched decode
pci1: <ACPI PCI bus> on pcib1
pci1: domain=0, physical bus=1
found-> vendor=0x8086, dev=0x10a7, revid=0x02
domain=0, bus=1, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
MSI-X supports 10 messages in map 0x1c
map[10]: type Memory, range 32, base 0xc4a20000, size 17, enabled
pcib1: requested memory range 0xc4a20000-0xc4a3ffff: good
map[18]: type I/O Port, range 32, base 0x2020, size 5, enabled
pcib1: requested I/O range 0x2020-0x203f: in range
map[1c]: type Memory, range 32, base 0xc4a44000, size 14, enabled
pcib1: requested memory range 0xc4a44000-0xc4a47fff: good
pcib1: matched entry for 1.0.INTB
pcib1: slot 0 INTB hardwired to IRQ 40
found-> vendor=0x8086, dev=0x10a7, revid=0x02
domain=0, bus=1, slot=0, func=1
class=02-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
MSI-X supports 10 messages in map 0x1c
map[10]: type Memory, range 32, base 0xc4a00000, size 17, enabled
pcib1: requested memory range 0xc4a00000-0xc4a1ffff: good
map[18]: type I/O Port, range 32, base 0x2000, size 5, enabled
pcib1: requested I/O range 0x2000-0x201f: in range
map[1c]: type Memory, range 32, base 0xc4a40000, size 14, enabled
pcib1: requested memory range 0xc4a40000-0xc4a43fff: good
pcib1: matched entry for 1.0.INTA
pcib1: slot 0 INTA hardwired to IRQ 28
igb0: <Intel(R) PRO/1000 Network Connection version - 1.7.3> port 0x2020-0x203f mem 0xc4a20000-0xc4a3ffff,0xc4a44000-0xc4a47fff irq 40 at device 0.0 on pci1
igb0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xc4a20000
igb0: Reserved 0x4000 bytes for rid 0x1c type 3 at 0xc4a44000
igb0: attempting to allocate 3 MSI-X vectors (10 supported)
msi: routing MSI-X IRQ 256 to local APIC 0 vector 49
msi: routing MSI-X IRQ 257 to local APIC 0 vector 50
msi: routing MSI-X IRQ 258 to local APIC 0 vector 51
igb0: using IRQs 256-258 for MSI-X
igb0: Using MSIX interrupts with 3 vectors
igb0: [MPSAFE]
igb0: [ITHREAD]
igb0: [MPSAFE]
igb0: [ITHREAD]
igb0: [MPSAFE]
igb0: [ITHREAD]
igb0: bpf attached
igb0: Ethernet address: 00:15:17:af:cd:0c
igb1: <Intel(R) PRO/1000 Network Connection version - 1.7.3> port 0x2000-0x201f mem 0xc4a00000-0xc4a1ffff,0xc4a40000-0xc4a43fff irq 28 at device 0.1 on pci1
igb1: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xc4a00000
igb1: Reserved 0x4000 bytes for rid 0x1c type 3 at 0xc4a40000
igb1: attempting to allocate 3 MSI-X vectors (10 supported)
msi: routing MSI-X IRQ 259 to local APIC 0 vector 52
msi: routing MSI-X IRQ 260 to local APIC 0 vector 53
msi: routing MSI-X IRQ 261 to local APIC 0 vector 54
igb1: using IRQs 259-261 for MSI-X
igb1: Using MSIX interrupts with 3 vectors
igb1: [MPSAFE]
igb1: [ITHREAD]
igb1: [MPSAFE]
igb1: [ITHREAD]
igb1: [MPSAFE]
igb1: [ITHREAD]
igb1: bpf attached
igb1: Ethernet address: 00:15:17:af:cd:0d
pcib2: <ACPI PCI-PCI bridge> irq 24 at device 3.0 on pci0
pcib2: domain 0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0x1000-0x1fff
pcib2: memory decode 0xc0000000-0xc2ffffff
pcib2: prefetched decode 0xb0000000-0xbfffffff
pci2: <ACPI PCI bus> on pcib2
pci2: domain=0, physical bus=2
found-> vendor=0x10de, dev=0x0402, revid=0xa1
domain=0, bus=2, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 32, base 0xc2000000, size 24, enabled
pcib2: requested memory range 0xc2000000-0xc2ffffff: good
map[14]: type Prefetchable Memory, range 64, base 0xb0000000, size 28, enabled
pcib2: requested memory range 0xb0000000-0xbfffffff: good
map[1c]: type Memory, range 64, base 0xc0000000, size 25, enabled
pcib2: requested memory range 0xc0000000-0xc1ffffff: good
map[24]: type I/O Port, range 32, base 0x1000, size 7, enabled
pcib2: requested I/O range 0x1000-0x107f: in range
pcib2: matched entry for 2.0.INTA
pcib2: slot 0 INTA hardwired to IRQ 24
vgapci0: <VGA-compatible display> port 0x1000-0x107f mem 0xc2000000-0xc2ffffff,0xb0000000-0xbfffffff,0xc0000000-0xc1ffffff irq 24 at device 0.0 on pci2
pcib3: <ACPI PCI-PCI bridge> irq 30 at device 7.0 on pci0
pcib3: domain 0
pcib3: secondary bus 3
pcib3: subordinate bus 3
pcib3: I/O decode 0xf000-0xfff
pcib3: no prefetched decode
pci3: <ACPI PCI bus> on pcib3
pci3: domain=0, physical bus=3
pci0: <base peripheral, interrupt controller> at device 16.0 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 16.1 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 17.0 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 17.1 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.0 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.1 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.2 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.3 (no driver attached)
pci0: <base peripheral> at device 22.0 (no driver attached)
pci0: <base peripheral> at device 22.1 (no driver attached)
pci0: <base peripheral> at device 22.2 (no driver attached)
pci0: <base peripheral> at device 22.3 (no driver attached)
pci0: <base peripheral> at device 22.4 (no driver attached)
pci0: <base peripheral> at device 22.5 (no driver attached)
pci0: <base peripheral> at device 22.6 (no driver attached)
pci0: <base peripheral> at device 22.7 (no driver attached)
uhci0: <UHCI (generic) USB controller> port 0x30e0-0x30ff irq 19 at device 26.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x30e0
ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 0 vector 55
uhci0: [MPSAFE]
uhci0: [ITHREAD]
uhci0: LegSup = 0x103f
usbus0: <UHCI (generic) USB controller> on uhci0
uhci1: <UHCI (generic) USB controller> port 0x30c0-0x30df irq 19 at device 26.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x30c0
uhci1: [MPSAFE]
uhci1: [ITHREAD]
uhci1: LegSup = 0x003f
usbus1: <UHCI (generic) USB controller> on uhci1
uhci2: <UHCI (generic) USB controller> port 0x30a0-0x30bf irq 19 at device 26.2 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x30a0
uhci2: [MPSAFE]
uhci2: [ITHREAD]
uhci2: LegSup = 0x003f
usbus2: <UHCI (generic) USB controller> on uhci2
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xc4b26000-0xc4b263ff irq 19 at device 26.7 on pci0
ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xc4b26000
ehci0: [MPSAFE]
ehci0: [ITHREAD]
usbus3: EHCI version 1.0
usbus3: <EHCI (generic) USB 2.0 controller> on ehci0
pci0: <multimedia, HDA> at device 27.0 (no driver attached)
pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pcib4: domain 0
pcib4: secondary bus 4
pcib4: subordinate bus 4
pcib4: I/O decode 0xf000-0xfff
pcib4: no prefetched decode
pci4: <ACPI PCI bus> on pcib4
pci4: domain=0, physical bus=4
pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pcib5: domain 0
pcib5: secondary bus 5
pcib5: subordinate bus 5
pcib5: I/O decode 0xf000-0xfff
pcib5: memory decode 0xc4000000-0xc48fffff
pcib5: prefetched decode 0xc3000000-0xc3ffffff
pci5: <ACPI PCI bus> on pcib5
pci5: domain=0, physical bus=5
pcib6: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0
pcib6: domain 0
pcib6: secondary bus 6
pcib6: subordinate bus 6
pcib6: I/O decode 0xf000-0xfff
pcib6: no prefetched decode
pci6: <ACPI PCI bus> on pcib6
pci6: domain=0, physical bus=6
uhci3: <UHCI (generic) USB controller> port 0x3080-0x309f irq 16 at device 29.0 on pci0
uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0x3080
ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 56
uhci3: [MPSAFE]
uhci3: [ITHREAD]
uhci3: LegSup = 0x003f
usbus4: <UHCI (generic) USB controller> on uhci3
uhci4: <UHCI (generic) USB controller> port 0x3060-0x307f irq 16 at device 29.1 on pci0
uhci4: Reserved 0x20 bytes for rid 0x20 type 4 at 0x3060
uhci4: [MPSAFE]
uhci4: [ITHREAD]
uhci4: LegSup = 0x003f
usbus5: <UHCI (generic) USB controller> on uhci4
uhci5: <UHCI (generic) USB controller> port 0x3040-0x305f irq 16 at device 29.2 on pci0
uhci5: Reserved 0x20 bytes for rid 0x20 type 4 at 0x3040
uhci5: [MPSAFE]
uhci5: [ITHREAD]
uhci5: LegSup = 0x003f
usbus6: <UHCI (generic) USB controller> on uhci5
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xc4b25000-0xc4b253ff irq 16 at device 29.7 on pci0
ehci1: Reserved 0x400 bytes for rid 0x10 type 3 at 0xc4b25000
ehci1: [MPSAFE]
ehci1: [ITHREAD]
usbus7: EHCI version 1.0
usbus7: <EHCI (generic) USB 2.0 controller> on ehci1
pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib7: domain 0
pcib7: secondary bus 7
pcib7: subordinate bus 7
pcib7: I/O decode 0xf000-0xfff
pcib7: memory decode 0xc4900000-0xc49fffff
pcib7: no prefetched decode
pcib7: Subtractively decoded bridge.
pci7: <ACPI PCI bus> on pcib7
pci7: domain=0, physical bus=7
found-> vendor=0x104c, dev=0x8023, revid=0x00
domain=0, bus=7, slot=1, func=0
class=0c-00-10, hdrtype=0x00, mfdev=0
cmdreg=0x0016, statreg=0x0210, cachelnsz=16 (dwords)
lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xc4904000, size 11, enabled
pcib7: requested memory range 0xc4904000-0xc49047ff: good
map[14]: type Memory, range 32, base 0xc4900000, size 14, enabled
pcib7: requested memory range 0xc4900000-0xc4903fff: good
pcib7: matched entry for 7.1.INTA
pcib7: slot 1 INTA hardwired to IRQ 17
fwohci0: <Texas Instruments TSB43AB22/A> mem 0xc4904000-0xc49047ff,0xc4900000-0xc4903fff irq 17 at device 1.0 on pci7
fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xc4904000
ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 0 vector 57
fwohci0: [MPSAFE]
fwohci0: [ITHREAD]
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:90:27:00:02:58:ce:0c
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x173c000
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:90:27:58:ce:0c
fwe0: bpf attached
fwe0: Ethernet address: 02:90:27:58:ce:0c
fwip0: <IP over FireWire> on firewire0
fwip0: bpf attached
fwip0: Firewire address: 00:90:27:00:02:58:ce:0c @ 0xfffe00000000, S400, maxrec 2048
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: fwohci_intr_core: BUS reset
fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, CYCLEMASTER mode
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH10 SATA300 controller> port 0x3108-0x310f,0x3114-0x3117,0x3100-0x3107,0x3110-0x3113,0x3020-0x303f mem 0xc4b24000-0xc4b247ff irq 18 at device 31.2 on pci0
atapci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x3020
ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 0 vector 58
atapci0: [MPSAFE]
atapci0: [ITHREAD]
atapci0: Reserved 0x800 bytes for rid 0x24 type 3 at 0xc4b24000
atapci0: AHCI called from vendor specific driver
atapci0: AHCI v1.20 controller with 6 3Gbps ports, PM not supported
atapci0: Caps: 64bit NCQ SNTF ALP AL CLO 3Gbps PMD SSC PSC 32cmd CCC EM 6ports
ata2: <ATA channel 0> on atapci0
ata2: AHCI reset...
ata2: hardware reset ...
ata2: SATA connect time=10ms status=00000113
ata2: ready wait time=33ms
ata2: software reset port 0...
ata2: ready wait time=0ms
ata2: SIGNATURE: 00000101
ata2: AHCI reset done: devices=00000001
ata2: [MPSAFE]
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: AHCI reset...
ata3: hardware reset ...
ata3: SATA connect time=10ms status=00000113
ata3: ready wait time=34ms
ata3: software reset port 0...
ata3: ready wait time=0ms
ata3: SIGNATURE: 00000101
ata3: AHCI reset done: devices=00000001
ata3: [MPSAFE]
ata3: [ITHREAD]
ata4: <ATA channel 2> on atapci0
ata4: AHCI reset...
ata4: hardware reset ...
ata4: SATA connect time=10ms status=00000113
ata4: ready wait time=34ms
ata4: software reset port 0...
ata4: ready wait time=0ms
ata4: SIGNATURE: 00000101
ata4: AHCI reset done: devices=00000001
ata4: [MPSAFE]
ata4: [ITHREAD]
ata5: <ATA channel 3> on atapci0
ata5: AHCI reset...
ata5: hardware reset ...
ata5: SATA connect time=10ms status=00000113
ata5: ready wait time=34ms
ata5: software reset port 0...
ata5: ready wait time=0ms
ata5: SIGNATURE: 00000101
ata5: AHCI reset done: devices=00000001
ata5: [MPSAFE]
ata5: [ITHREAD]
ata6: <ATA channel 4> on atapci0
ata6: AHCI reset...
ata6: hardware reset ...
ata6: SATA connect timeout status=00000004
ata6: AHCI reset done: phy reset found no device
ata6: [MPSAFE]
ata6: [ITHREAD]
ata7: <ATA channel 5> on atapci0
ata7: AHCI reset...
ata7: hardware reset ...
ata7: SATA connect time=10ms status=00000113
ata7: ready wait time=89ms
ata7: software reset port 0...
ata7: ready wait time=0ms
ata7: SIGNATURE: eb140101
ata7: AHCI reset done: devices=00010000
ata7: [MPSAFE]
ata7: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Sleep Button> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0
atrtc0: registered as a time-of-day clock (resolution 1000000us)
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 0 vector 59
uart0: [FILTER]
uart0: fast interrupt
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
ioapic0: routing intpin 3 (ISA IRQ 3) to lapic 0 vector 60
uart1: [FILTER]
uart1: fast interrupt
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est0: Invalid id16 (set, cur) = (17, 18)
est0: Invalid freq 2261, ignored.
est0: Invalid id16 (set, cur) = (16, 18)
est0: Invalid freq 2128, ignored.
est0: Invalid id16 (set, cur) = (15, 18)
est0: Invalid freq 1995, ignored.
est0: Invalid id16 (set, cur) = (14, 18)
est0: Invalid freq 1862, ignored.
est0: Invalid id16 (set, cur) = (13, 18)
est0: Invalid freq 1729, ignored.
est0: Invalid id16 (set, cur) = (12, 18)
est0: Invalid freq 1596, ignored.
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
device_attach: acpi_perf1 attach returned 6
device_attach: acpi_perf1 attach returned 6
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 12
device_attach: est1 attach returned 6
p4tcc1: <CPU Frequency Thermal Control> on cpu1
cpu2: <ACPI CPU> on acpi0
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est2: Invalid id16 (set, cur) = (17, 18)
est2: Invalid freq 2261, ignored.
est2: Invalid id16 (set, cur) = (16, 18)
est2: Invalid freq 2128, ignored.
est2: Invalid id16 (set, cur) = (15, 18)
est2: Invalid freq 1995, ignored.
est2: Invalid id16 (set, cur) = (14, 18)
est2: Invalid freq 1862, ignored.
est2: Invalid id16 (set, cur) = (13, 18)
est2: Invalid freq 1729, ignored.
est2: Invalid id16 (set, cur) = (12, 18)
est2: Invalid freq 1596, ignored.
p4tcc2: <CPU Frequency Thermal Control> on cpu2
cpu3: <ACPI CPU> on acpi0
device_attach: acpi_perf3 attach returned 6
device_attach: acpi_perf3 attach returned 6
est3: <Enhanced SpeedStep Frequency Control> on cpu3
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 12
device_attach: est3 attach returned 6
p4tcc3: <CPU Frequency Thermal Control> on cpu3
cpu4: <ACPI CPU> on acpi0
est4: <Enhanced SpeedStep Frequency Control> on cpu4
est4: Invalid id16 (set, cur) = (17, 18)
est4: Invalid freq 2261, ignored.
est4: Invalid id16 (set, cur) = (16, 18)
est4: Invalid freq 2128, ignored.
est4: Invalid id16 (set, cur) = (15, 18)
est4: Invalid freq 1995, ignored.
est4: Invalid id16 (set, cur) = (14, 18)
est4: Invalid freq 1862, ignored.
est4: Invalid id16 (set, cur) = (13, 18)
est4: Invalid freq 1729, ignored.
est4: Invalid id16 (set, cur) = (12, 18)
est4: Invalid freq 1596, ignored.
p4tcc4: <CPU Frequency Thermal Control> on cpu4
cpu5: <ACPI CPU> on acpi0
device_attach: acpi_perf5 attach returned 6
device_attach: acpi_perf5 attach returned 6
est5: <Enhanced SpeedStep Frequency Control> on cpu5
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 12
device_attach: est5 attach returned 6
p4tcc5: <CPU Frequency Thermal Control> on cpu5
cpu6: <ACPI CPU> on acpi0
est6: <Enhanced SpeedStep Frequency Control> on cpu6
est6: Invalid id16 (set, cur) = (17, 18)
est6: Invalid freq 2261, ignored.
est6: Invalid id16 (set, cur) = (16, 18)
est6: Invalid freq 2128, ignored.
est6: Invalid id16 (set, cur) = (15, 18)
est6: Invalid freq 1995, ignored.
est6: Invalid id16 (set, cur) = (14, 18)
est6: Invalid freq 1862, ignored.
est6: Invalid id16 (set, cur) = (13, 18)
est6: Invalid freq 1729, ignored.
est6: Invalid id16 (set, cur) = (12, 18)
est6: Invalid freq 1596, ignored.
p4tcc6: <CPU Frequency Thermal Control> on cpu6
cpu7: <ACPI CPU> on acpi0
device_attach: acpi_perf7 attach returned 6
device_attach: acpi_perf7 attach returned 6
est7: <Enhanced SpeedStep Frequency Control> on cpu7
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 12
device_attach: est7 attach returned 6
p4tcc7: <CPU Frequency Thermal Control> on cpu7
ahc_isa_probe 0: ioport 0xc00 alloc failed
ex_isa_identify()
isa_probe_children: disabling PnP devices
atrtc: atrtc0 already exists; skipping it
sc: sc0 already exists; skipping it
uart: uart0 already exists; skipping it
uart: uart1 already exists; skipping it
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROMs> at iomem 0xcd000-0xcdfff,0xce000-0xcefff,0xcf000-0xd4fff on isa0
atkbd: the current kbd controller command byte 0065
atkbd: unable to set the command byte.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: scteken (teken terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
kbd0: atkbd0, generic (0), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 61
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: current command byte:0065
psm0: unable to set the command byte.
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
ppc0: cannot reserve I/O port range
ppc0: <Parallel port> failed to probe at irq 7 on isa0
isa_probe_children: probing PnP devices
Device configuration finished.
Reducing kern.maxvnodes 379618 -> 100000
procfs registered
lapic: Divisor 2, Frequency 66666227 hz
Timecounter "TSC" frequency 2399984204 Hz quality -100
Timecounters tick every 1.000 msec
lo0: bpf attached
hptrr: no controller detected.
ata2: Identifying devices: 00000001
ata2: New devices: 00000001firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
firewire0: bus manager 0
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 12Mbps Full Speed USB v1.0
usbus6: 12Mbps Full Speed USB v1.0
usbus7: 480Mbps High Speed USB v2.0
ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <Intel> at usbus5
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen6.1: <Intel> at usbus6
uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
ugen7.1: <Intel> at usbus7
uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
ad4: 953869MB <Seagate ST31000340NS SN06> at ata2-master SATA150
ad4: 1953525168 sectors [1938021C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad4
ad4: Intel check1 failed
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub6: 2 ports with 2 removable, self powered
ad4: Adaptec check1 failed
ad4: LSI (v3) check1 failed
ad4: LSI (v2) check1 failed
ad4: DDF pri_lba= 1953484224 length= 25 blocks
********* ATA DDF Metadata *********
**** Header ****
DDF_rev= 01.00.00 Sequence_Number= 0x20 Open_Flag= 0x0
Primary Header LBA= 1953484224 Header_Type = 0x1
Max_PD_Entries= 15 Max_VD_Entries= 15 Max_Partitions= 8 CR_Length= 2
CD= 1:1 PDR= 2:2 VDR= 4:2 CR= 6:18 PDD= 241
**** Controler Data ****
Product_ID: \M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?
Vendor 0x8086, Device 0x2925, SubVendor 0x0, Sub_Device 0x0
ata3: Identifying devices: 00000001
ata3: New devices: 00000001
ata3-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad6: 953869MB <Seagate ST31000340NS SN06> at ata3-master SATA150
ad6: 1953525168 sectors [1938021C/16H/63S] 16 sectors/interrupt 1 depth queue
ad6: Intel check1 failed
ad6: Adaptec check1 failed
ad6: LSI (v3) check1 failed
ad6: LSI (v2) check1 failed
ad6: DDF pri_lba= 1953484224 length= 25 blocks
********* ATA DDF Metadata *********
**** Header ****
DDF_rev= 01.00.00 Sequence_Number= 0x20 Open_Flag= 0x0
Primary Header LBA= 1953484224 Header_Type = 0x1
Max_PD_Entries= 15 Max_VD_Entries= 15 Max_Partitions= 8 CR_Length= 2
CD= 1:1 PDR= 2:2 VDR= 4:2 CR= 6:18 PDD= 241
**** Controler Data ****
Product_ID: \M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?
Vendor 0x8086, Device 0x2925, SubVendor 0x0, Sub_Device 0x0
ata4: Identifying devices: 00000001
ata4: New devices: 00000001
ata4-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
GEOM: ad4s1: geometry does not match label (255h,63s != 16h,63s).
GEOM: new disk ad6
ad8: 953869MB <Seagate ST31000340NS SN06> at ata4-master SATA150
ad8: 1953525168 sectors [1938021C/16H/63S] 16 sectors/interrupt 1 depth queue
ad8: Intel check1 failed
ad8: Adaptec check1 failed
ad8: LSI (v3) check1 failed
ad8: LSI (v2) check1 failed
ad8: DDF pri_lba= 1953484224 length= 25 blocks
********* ATA DDF Metadata *********
**** Header ****
DDF_rev= 01.00.00 Sequence_Number= 0x20 Open_Flag= 0x0
Primary Header LBA= 1953484224 Header_Type = 0x1
Max_PD_Entries= 15 Max_VD_Entries= 15 Max_Partitions= 8 CR_Length= 2
CD= 1:1 PDR= 2:2 VDR= 4:2 CR= 6:18 PDD= 241
**** Controler Data ****
Product_ID: \M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?
Vendor 0x8086, Device 0x2925, SubVendor 0x0, Sub_Device 0x0
ata5: Identifying devices: 00000001
ata5: New devices: 00000001
ata5-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad10: 953869MB <Seagate ST31000340NS SN06> at ata5-master SATA150
ad10: 1953525168 sectors [1938021C/16H/63S] 16 sectors/interrupt 1 depth queue
ad10: Intel check1 failed
ad10: Adaptec check1 failed
ad10: LSI (v3) check1 failed
ad10: LSI (v2) check1 failed
ad10: DDF pri_lba= 1953484224 length= 25 blocks
********* ATA DDF Metadata *********
**** Header ****
DDF_rev= 01.00.00 Sequence_Number= 0x20 Open_Flag= 0x0
Primary Header LBA= 1953484224 Header_Type = 0x1
Max_PD_Entries= 15 Max_VD_Entries= 15 Max_Partitions= 8 CR_Length= 2
CD= 1:1 PDR= 2:2 VDR= 4:2 CR= 6:18 PDD= 241
**** Controler Data ****
Product_ID: \M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?
Vendor 0x8086, Device 0x2925, SubVendor 0x0, Sub_Device 0x0
ata6: Identifying devices: 00000000
ata6: New devices: 00000000
ata7: Identifying devices: 00010000
ata7: New devices: 00010000
ata7-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=40 wire
ata7: device_reset timeout=110us
acd0: <Optiarc DVD RW AD-5240S/1.01> DVDR drive at ata7 as master
acd0: read 8268KB/s (8268KB/s) write 8268KB/s (8268KB/s), 2048KB buffer, SATA150
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet
acd0: Writes: CDR, CDRW, DVDR, test write, burnproof
acd0: Audio: play
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
uhub3: 6 ports with 6 removable, self powered
uhub7: 6 ports with 6 removable, self powered
ugen4.2: <BTC> at usbus4
ukbd0: <BTC USB Multimedia Keyboard, class 0/0, rev 1.10/1.00, addr 2> on usbus4
kbd2 at ukbd0
kbd2: ukbd0, generic (0), config:0x0, flags:0x3d0000
uhid0: <BTC USB Multimedia Keyboard, class 0/0, rev 1.10/1.00, addr 2> on usbus4
(probe0:sbp0:0:0:0): error 22
(probe0:sbp0:0:0:0): Unretryable Error
(probe1:sbp0:0:1:0): error 22
(probe1:sbp0:0:1:0): Unretryable Error
(probe2:sbp0:0:2:0): error 22
(probe2:sbp0:0:2:0): Unretryable Error
(probe3:sbp0:0:3:0): error 22
(probe3:sbp0:0:3:0): Unretryable Error
(probe4:sbp0:0:4:0): error 22
(probe4:sbp0:0:4:0): Unretryable Error
(probe5:sbp0:0:5:0): error 22
(probe5:sbp0:0:5:0): Unretryable Error
(probe6:sbp0:0:6:0): error 22
(probe6:sbp0:0:6:0): Unretryable Error
ATA PseudoRAID loaded
********** ATA PseudoRAID ar0 Metadata **********
=================================================
format DDF
type RAID0
flags 0x00 0
magic_0 0x00000000e14cdcb7
magic_1 0x0000000000000000
generation 30
total_sectors 1951170560
offset_sectors 0
heads 255
sectors 63
cylinders 121454
width 1
interleave 128
total_disks 1
disk 0: flags = 0x0b b<ONLINE,ASSIGNED,PRESENT>
ad4: sectors 1951170560
=================================================
ar0: writing of DDF metadata is NOT supported yet
ar0: 952720MB <DDF RAID0 (stripe 64 KB)> status: READY
ar0: 1951170560 sectors [121454C/255H/63S] <> subdisks defined as:
ar0: disk0 READY using ad4 at ata2-master
********** ATA PseudoRAID ar1 Metadata **********
=================================================
format DDF
type RAID0
flags 0x00 0
magic_0 0x00000000e0581724
magic_1 0x0000000000000001
generation 30
total_sectors 5853511680
offset_sectors 0
heads 255
sectors 63
cylinders 364364
width 3
interleave 128
total_disks 3
disk 0: flags = 0x0b b<ONLINE,ASSIGNED,PRESENT>
ad6: sectors 1951170560
disk 1: flags = 0x0b b<ONLINE,ASSIGNED,PRESENT>
ad8: sectors 1951170560
disk 2: flags = 0x0b b<ONLINE,ASSIGNED,PRESENT>
ad10: sectors 1951170560
=================================================
ar1: writing of DDF metadata is NOT supported yet
ar1: 2858160MB <DDF RAID0 (stripe 64 KB)> status: READY
ar1: 5853511680 sectors [364364C/255H/63S] <> subdisks defined as:
ar1: disk0 READY using ad6 at ata3-master
ar1: disk1 READY using ad8 at ata4-master
ar1: disk2 READY using ad10 at ata5-master
lapic1: Forcing LINT1 to edge trigger
SMP: AP CPU #1 Launched!
cpu1 AP:
ID: 0x01000000 VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00008400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400
lapic5: Forcing LINT1 to edge trigger
SMP: AP CPU #5 Launched!
cpu5 AP:
ID: 0x05000000 VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00008400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400
lapic6: Forcing LINT1 to edge trigger
SMP: AP CPU #6 Launched!
cpu6 AP:
ID: 0x06000000 VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00008400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400
lapic4: Forcing LINT1 to edge trigger
SMP: AP CPU #4 Launched!
cpu4 AP:
ID: 0x04000000 VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00008400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400
lapic7: Forcing LINT1 to edge trigger
SMP: AP CPU #7 Launched!
cpu7 AP:
ID: 0x07000000 VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00008400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400
lapic3: Forcing LINT1 to edge trigger
SMP: AP CPU #3 Launched!
cpu3 AP:
ID: 0x03000000 VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00008400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400
lapic2: Forcing LINT1 to edge trigger
SMP: AP CPU #2 Launched!
cpu2 AP:
ID: 0x02000000 VER: 0x00060015 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00008400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400
ioapic0: routing intpin 3 (ISA IRQ 3) to lapic 1 vector 48
ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 2 vector 48
ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 3 vector 48
ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 4 vector 48
ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 5 vector 48
ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 6 vector 48
ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 7 vector 48
msi: Assigning MSI-X IRQ 257 to local APIC 1 vector 49
msi: Assigning MSI-X IRQ 258 to local APIC 2 vector 49
msi: Assigning MSI-X IRQ 259 to local APIC 3 vector 49
msi: Assigning MSI-X IRQ 260 to local APIC 4 vector 49
msi: Assigning MSI-X IRQ 261 to local APIC 5 vector 49
ugen5.2: <No brand> at usbus5
ukbd1: <No brand KVM, class 0/0, rev 1.10/0.00, addr 2> on usbus5
ugen2.2: <American Megatrends Inc.> at usbus2
kbd3 at ukbd1
kbd3: ukbd1, generic (0), config:0x0, flags:0x3d0000
ukbd2: <Keyboard Interface> on usbus2
kbd: new array size 8
kbd4 at ukbd2
kbd4: ukbd2, generic (0), config:0x0, flags:0x3d0000
ums0: <No brand KVM, class 0/0, rev 1.10/0.00, addr 2> on usbus5
ums1: <Mouse Interface> on usbus2
ums1: 3 buttons and [Z] coordinates ID=0
ums0: 5 buttons and [XYZ] coordinates ID=1
ugen5.3: <Logitech> at usbus5
ums2: <Logitech Optical USB Mouse, class 0/0, rev 2.00/3.40, addr 3> on usbus5
ums2: 3 buttons and [XYZ] coordinates ID=0
GEOM: new disk ad8
GEOM: new disk ad10
GEOM: new disk ar0
GEOM: new disk ar1
Trying to mount root from ufs:/dev/ar0s1a
ct_to_ts([2009-01-20 13:55:19]) = 1232459719.000000000
start_init: trying /sbin/init
#pciconf -lv
hostb0@pci0:0:0:0: class=0x060000 card=0x34e28086 chip=0x34068086 rev=0x13 hdr=0x00
vendor = 'Intel Corporation'
device = 'QuickPath Architecture I/O Hub to ESI Port'
class = bridge
subclass = HOST-PCI
pcib1@pci0:0:1:0: class=0x060400 card=0x34e28086 chip=0x34088086 rev=0x13 hdr=0x01
vendor = 'Intel Corporation'
device = 'QuickPath Architecture I/O Hub PCI Express Root Port 1'
class = bridge
subclass = PCI-PCI
pcib2@pci0:0:3:0: class=0x060400 card=0x34e28086 chip=0x340a8086 rev=0x13 hdr=0x01
vendor = 'Intel Corporation'
device = 'QuickPath Architecture I/O Hub PCI Express Root Port 3'
class = bridge
subclass = PCI-PCI
pcib3@pci0:0:7:0: class=0x060400 card=0x34e28086 chip=0x340e8086 rev=0x13 hdr=0x01
vendor = 'Intel Corporation'
device = 'QuickPath Architecture I/O Hub PCI Express Root Port 7'
class = bridge
subclass = PCI-PCI
none0@pci0:0:16:0: class=0x080000 card=0x00e20086 chip=0x34258086 rev=0x13 hdr=0x00
vendor = 'Intel Corporation'
device = 'QuickPath Interconnect Physical and Link Layer Registers - Port 0'
class = base peripheral
subclass = interrupt controller
none1@pci0:0:16:1: class=0x080000 card=0x00e20086 chip=0x34268086 rev=0x13 hdr=0x00
vendor = 'Intel Corporation'
device = 'QuickPath Interconnect Routing and Protocol Layer Registers - Port 0'
class = base peripheral
subclass = interrupt controller
none2@pci0:0:17:0: class=0x080000 card=0x00e20086 chip=0x34278086 rev=0x13 hdr=0x00
vendor = 'Intel Corporation'
device = 'QuickPath Interconnect Physical and Link Layer Registers - Port 1'
class = base peripheral
subclass = interrupt controller
none3@pci0:0:17:1: class=0x080000 card=0x00e20086 chip=0x34288086 rev=0x13 hdr=0x00
vendor = 'Intel Corporation'
device = 'QuickPath Interconnect Routing & Protocol Layer Registers - Port 1'
class = base peripheral
subclass = interrupt controller
ioapic0@pci0:0:19:0: class=0x080020 card=0x00e20086 chip=0x342d8086 rev=0x13 hdr=0x00
vendor = 'Intel Corporation'
device = 'QuickPath Architecture I/O Hub I/OxAPIC Interrupt Controller'
class = base peripheral
subclass = interrupt controller
none4@pci0:0:20:0: class=0x080000 card=0x00e20086 chip=0x342e8086 rev=0x13 hdr=0x00
vendor = 'Intel Corporation'
device = 'QuickPath Architecture I/O Hub System Management Registers'
class = base peripheral
subclass = interrupt controller
none5@pci0:0:20:1: class=0x080000 card=0x00e20086 chip=0x34228086 rev=0x13 hdr=0x00
vendor = 'Intel Corporation'
device = 'QuickPath Architecture I/O Hub GPIO and Scratch Pad Registers'
class = base peripheral
subclass = interrupt controller
none6@pci0:0:20:2: class=0x080000 card=0x00e20086 chip=0x34238086 rev=0x13 hdr=0x00
vendor = 'Intel Corporation'
device = 'QuickPath Architecture I/O Hub Control Status and RAS Registers'
class = base peripheral
subclass = interrupt controller
none7@pci0:0:20:3: class=0x080000 card=0x00e20086 chip=0x34388086 rev=0x13 hdr=0x00
vendor = 'Intel Corporation'
device = 'QuickPath Architecture I/O Hub Throttle Registers'
class = base peripheral
subclass = interrupt controller
ioapic1@pci0:0:21:0: class=0x080020 card=0x00e20086 chip=0x342f8086 rev=0x13 hdr=0x00
vendor = 'Intel Corporation'
device = 'Trusted Execution Technology Registers'
class = base peripheral
subclass = interrupt controller
none8@pci0:0:22:0: class=0x088000 card=0x34e28086 chip=0x34308086 rev=0x13 hdr=0x00
vendor = 'Intel Corporation'
device = 'DMA Engine'
class = base peripheral
none9@pci0:0:22:1: class=0x088000 card=0x34e28086 chip=0x34318086 rev=0x13 hdr=0x00
vendor = 'Intel Corporation'
device = 'DMA Engine'
class = base peripheral
none10@pci0:0:22:2: class=0x088000 card=0x34e28086 chip=0x34328086 rev=0x13 hdr=0x00
vendor = 'Intel Corporation'
device = 'DMA Engine'
class = base peripheral
none11@pci0:0:22:3: class=0x088000 card=0x34e28086 chip=0x34338086 rev=0x13 hdr=0x00
vendor = 'Intel Corporation'
device = 'DMA Engine'
class = base peripheral
none12@pci0:0:22:4: class=0x088000 card=0x34e28086 chip=0x34298086 rev=0x13 hdr=0x00
vendor = 'Intel Corporation'
device = 'DMA Engine'
class = base peripheral
none13@pci0:0:22:5: class=0x088000 card=0x34e28086 chip=0x342a8086 rev=0x13 hdr=0x00
vendor = 'Intel Corporation'
device = 'DMA Engine'
class = base peripheral
none14@pci0:0:22:6: class=0x088000 card=0x34e28086 chip=0x342b8086 rev=0x13 hdr=0x00
vendor = 'Intel Corporation'
device = 'DMA Engine'
class = base peripheral
none15@pci0:0:22:7: class=0x088000 card=0x34e28086 chip=0x342c8086 rev=0x13 hdr=0x00
vendor = 'Intel Corporation'
device = 'DMA Engine'
class = base peripheral
uhci0@pci0:0:26:0: class=0x0c0300 card=0x34e28086 chip=0x3a378086 rev=0x00 hdr=0x00
vendor = 'Intel Corporation'
device = 'USB UHCI Controller *4'
class = serial bus
subclass = USB
uhci1@pci0:0:26:1: class=0x0c0300 card=0x34e28086 chip=0x3a388086 rev=0x00 hdr=0x00
vendor = 'Intel Corporation'
device = 'USB UHCI Controller *5'
class = serial bus
subclass = USB
uhci2@pci0:0:26:2: class=0x0c0300 card=0x34e28086 chip=0x3a398086 rev=0x00 hdr=0x00
vendor = 'Intel Corporation'
device = 'USB UHCI Controller *6'
class = serial bus
subclass = USB
ehci0@pci0:0:26:7: class=0x0c0320 card=0x34e28086 chip=0x3a3c8086 rev=0x00 hdr=0x00
vendor = 'Intel Corporation'
device = 'USB EHCI Controller *2'
class = serial bus
subclass = USB
none16@pci0:0:27:0: class=0x040300 card=0x34e28086 chip=0x3a3e8086 rev=0x00 hdr=0x00
vendor = 'Intel Corporation'
device = 'HD Audio Controller'
class = multimedia
subclass = HDA
pcib4@pci0:0:28:0: class=0x060400 card=0x34e28086 chip=0x3a408086 rev=0x00 hdr=0x01
vendor = 'Intel Corporation'
device = 'PCI Express Port 1'
class = bridge
subclass = PCI-PCI
pcib5@pci0:0:28:4: class=0x060400 card=0x34e28086 chip=0x3a488086 rev=0x00 hdr=0x01
vendor = 'Intel Corporation'
device = 'PCI Express Port 5'
class = bridge
subclass = PCI-PCI
pcib6@pci0:0:28:5: class=0x060400 card=0x34e28086 chip=0x3a4a8086 rev=0x00 hdr=0x01
vendor = 'Intel Corporation'
device = 'PCI Express Port 6'
class = bridge
subclass = PCI-PCI
uhci3@pci0:0:29:0: class=0x0c0300 card=0x34e28086 chip=0x3a348086 rev=0x00 hdr=0x00
vendor = 'Intel Corporation'
device = 'USB UHCI Controller *1'
class = serial bus
subclass = USB
uhci4@pci0:0:29:1: class=0x0c0300 card=0x34e28086 chip=0x3a358086 rev=0x00 hdr=0x00
vendor = 'Intel Corporation'
device = 'USB UHCI Controller *2'
class = serial bus
subclass = USB
uhci5@pci0:0:29:2: class=0x0c0300 card=0x34e28086 chip=0x3a368086 rev=0x00 hdr=0x00
vendor = 'Intel Corporation'
device = 'USB UHCI Controller *3'
class = serial bus
subclass = USB
ehci1@pci0:0:29:7: class=0x0c0320 card=0x34e28086 chip=0x3a3a8086 rev=0x00 hdr=0x00
vendor = 'Intel Corporation'
device = 'USB EHCI Controller *1'
class = serial bus
subclass = USB
pcib7@pci0:0:30:0: class=0x060401 card=0x34e28086 chip=0x244e8086 rev=0x90 hdr=0x01
vendor = 'Intel Corporation'
device = '82801 Family (ICH2/3/4/5/6/7/8/9,63xxESB) Hub Interface to PCI Bridge'
class = bridge
subclass = PCI-PCI
isab0@pci0:0:31:0: class=0x060100 card=0x34e28086 chip=0x3a168086 rev=0x00 hdr=0x00
vendor = 'Intel Corporation'
device = 'LPC Interface Controller'
class = bridge
subclass = PCI-ISA
atapci0@pci0:0:31:2: class=0x010400 card=0x34e38086 chip=0x3a258086 rev=0x00 hdr=0x00
vendor = 'Intel Corporation'
device = 'SATA RAID Controller'
class = mass storage
subclass = RAID
none17@pci0:0:31:3: class=0x0c0500 card=0x34e28086 chip=0x3a308086 rev=0x00 hdr=0x00
vendor = 'Intel Corporation'
device = 'SMB controller (50011458)'
class = serial bus
subclass = SMBus
igb0@pci0:1:0:0: class=0x020000 card=0x34e28086 chip=0x10a78086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82575EB Gigabit Network Connection'
class = network
subclass = ethernet
igb1@pci0:1:0:1: class=0x020000 card=0x34e28086 chip=0x10a78086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82575EB Gigabit Network Connection'
class = network
subclass = ethernet
vgapci0@pci0:2:0:0: class=0x030000 card=0x2a8a107d chip=0x040210de rev=0xa1 hdr=0x00
vendor = 'Nvidia Corp'
device = 'gainward bliss 8600 gt 512mo silent fx pcx (0407)'
class = display
subclass = VGA
fwohci0@pci0:7:1:0: class=0x0c0010 card=0x34e28086 chip=0x8023104c rev=0x00 hdr=0x00
vendor = 'Texas Instruments (TI)'
device = 'IEEE1394a-2000 OHCI PHY/Link-Layer Ctrlr (TSB43AB21/A)'
class = serial bus
subclass = FireWire
#atacontrol list
ATA channel 2:
Master: ad4 <ST31000340NS/SN06> SATA revision 1.x
Slave: no device present
ATA channel 3:
Master: ad6 <ST31000340NS/SN06> SATA revision 1.x
Slave: no device present
ATA channel 4:
Master: ad8 <ST31000340NS/SN06> SATA revision 1.x
Slave: no device present
ATA channel 5:
Master: ad10 <ST31000340NS/SN06> SATA revision 1.x
Slave: no device present
ATA channel 6:
Master: no device present
Slave: no device present
ATA channel 7:
Master: acd0 <Optiarc DVD RW AD-5240S/1.01> SATA revision 1.x
Slave: no device present
#ifconfig
igb0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=13b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,TSO4>
ether 00:15:17:af:cd:0c
inet 10.0.1.144 netmask 0xfffffe00 broadcast 10.0.1.255
media: Ethernet autoselect (1000baseT <full-duplex>)
status: active
igb1: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=13b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,TSO4>
ether 00:15:17:af:cd:0d
media: Ethernet autoselect
status: no carrier
fwe0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=8<VLAN_MTU>
ether 02:90:27:58:ce:0c
ch 1 dma -1
fwip0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
lladdr 0.90.27.0.2.58.ce.c.a.2.ff.fe.0.0.0.0
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=3<RXCSUM,TXCSUM>
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
inet6 ::1 prefixlen 128
inet 127.0.0.1 netmask 0xff000000
>How-To-Repeat:
>Fix:
Patch attached with submission follows:
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-RC1 #0: Thu Sep 17 18:50:57 UTC 2009
root@mason.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(R) CPU E5530 @ 2.40GHz (2399.99-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x106a5 Stepping = 5
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x9ce3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,SSE4.2,POPCNT>
AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant
real memory = 6442450944 (6144 MB)
avail memory = 6086184960 (5804 MB)
ACPI APIC Table: <INTEL S5520SC >
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 SMT threads
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
cpu4 (AP): APIC ID: 4
cpu5 (AP): APIC ID: 5
cpu6 (AP): APIC ID: 6
cpu7 (AP): APIC ID: 7
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
lapic0: Forcing LINT1 to edge trigger
kbd1 at kbdmux0
acpi0: <INTEL S5520SC> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 28 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
igb0: <Intel(R) PRO/1000 Network Connection version - 1.7.3> port 0x2020-0x203f mem 0xc4a20000-0xc4a3ffff,0xc4a44000-0xc4a47fff irq 40 at device 0.0 on pci1
igb0: Using MSIX interrupts with 3 vectors
igb0: [ITHREAD]
igb0: [ITHREAD]
igb0: [ITHREAD]
igb0: Ethernet address: 00:15:17:af:cd:0c
igb1: <Intel(R) PRO/1000 Network Connection version - 1.7.3> port 0x2000-0x201f mem 0xc4a00000-0xc4a1ffff,0xc4a40000-0xc4a43fff irq 28 at device 0.1 on pci1
igb1: Using MSIX interrupts with 3 vectors
igb1: [ITHREAD]
igb1: [ITHREAD]
igb1: [ITHREAD]
igb1: Ethernet address: 00:15:17:af:cd:0d
pcib2: <ACPI PCI-PCI bridge> irq 24 at device 3.0 on pci0
pci2: <ACPI PCI bus> on pcib2
vgapci0: <VGA-compatible display> port 0x1000-0x107f mem 0xc2000000-0xc2ffffff,0xb0000000-0xbfffffff,0xc0000000-0xc1ffffff irq 24 at device 0.0 on pci2
pcib3: <ACPI PCI-PCI bridge> irq 30 at device 7.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pci0: <base peripheral, interrupt controller> at device 16.0 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 16.1 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 17.0 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 17.1 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.0 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.1 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.2 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.3 (no driver attached)
pci0: <base peripheral> at device 22.0 (no driver attached)
pci0: <base peripheral> at device 22.1 (no driver attached)
pci0: <base peripheral> at device 22.2 (no driver attached)
pci0: <base peripheral> at device 22.3 (no driver attached)
pci0: <base peripheral> at device 22.4 (no driver attached)
pci0: <base peripheral> at device 22.5 (no driver attached)
pci0: <base peripheral> at device 22.6 (no driver attached)
pci0: <base peripheral> at device 22.7 (no driver attached)
uhci0: <UHCI (generic) USB controller> port 0x30e0-0x30ff irq 19 at device 26.0 on pci0
uhci0: [ITHREAD]
uhci0: LegSup = 0x103f
usbus0: <UHCI (generic) USB controller> on uhci0
uhci1: <UHCI (generic) USB controller> port 0x30c0-0x30df irq 19 at device 26.1 on pci0
uhci1: [ITHREAD]
uhci1: LegSup = 0x003f
usbus1: <UHCI (generic) USB controller> on uhci1
uhci2: <UHCI (generic) USB controller> port 0x30a0-0x30bf irq 19 at device 26.2 on pci0
uhci2: [ITHREAD]
uhci2: LegSup = 0x003f
usbus2: <UHCI (generic) USB controller> on uhci2
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xc4b26000-0xc4b263ff irq 19 at device 26.7 on pci0
ehci0: [ITHREAD]
usbus3: EHCI version 1.0
usbus3: <EHCI (generic) USB 2.0 controller> on ehci0
pci0: <multimedia, HDA> at device 27.0 (no driver attached)
pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci5: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0
pci6: <ACPI PCI bus> on pcib6
uhci3: <UHCI (generic) USB controller> port 0x3080-0x309f irq 16 at device 29.0 on pci0
uhci3: [ITHREAD]
uhci3: LegSup = 0x003f
usbus4: <UHCI (generic) USB controller> on uhci3
uhci4: <UHCI (generic) USB controller> port 0x3060-0x307f irq 16 at device 29.1 on pci0
uhci4: [ITHREAD]
uhci4: LegSup = 0x003f
usbus5: <UHCI (generic) USB controller> on uhci4
uhci5: <UHCI (generic) USB controller> port 0x3040-0x305f irq 16 at device 29.2 on pci0
uhci5: [ITHREAD]
uhci5: LegSup = 0x003f
usbus6: <UHCI (generic) USB controller> on uhci5
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xc4b25000-0xc4b253ff irq 16 at device 29.7 on pci0
ehci1: [ITHREAD]
usbus7: EHCI version 1.0
usbus7: <EHCI (generic) USB 2.0 controller> on ehci1
pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci7: <ACPI PCI bus> on pcib7
fwohci0: <Texas Instruments TSB43AB22/A> mem 0xc4904000-0xc49047ff,0xc4900000-0xc4903fff irq 17 at device 1.0 on pci7
fwohci0: [ITHREAD]
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:90:27:00:02:58:ce:0c
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x173c000
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:90:27:58:ce:0c
fwe0: Ethernet address: 02:90:27:58:ce:0c
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: 00:90:27:00:02:58:ce:0c @ 0xfffe00000000, S400, maxrec 2048
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: fwohci_intr_core: BUS reset
fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, CYCLEMASTER mode
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH10 SATA300 controller> port 0x3108-0x310f,0x3114-0x3117,0x3100-0x3107,0x3110-0x3113,0x3020-0x303f mem 0xc4b24000-0xc4b247ff irq 18 at device 31.2 on pci0
atapci0: [ITHREAD]
atapci0: AHCI called from vendor specific driver
atapci0: AHCI v1.20 controller with 6 3Gbps ports, PM not supported
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
ata4: <ATA channel 2> on atapci0
ata4: [ITHREAD]
ata5: <ATA channel 3> on atapci0
ata5: [ITHREAD]
ata6: <ATA channel 4> on atapci0
ata6: [ITHREAD]
ata7: <ATA channel 5> on atapci0
ata7: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Sleep Button> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart1: [FILTER]
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
device_attach: acpi_perf1 attach returned 6
device_attach: acpi_perf1 attach returned 6
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 12
device_attach: est1 attach returned 6
p4tcc1: <CPU Frequency Thermal Control> on cpu1
cpu2: <ACPI CPU> on acpi0
est2: <Enhanced SpeedStep Frequency Control> on cpu2
p4tcc2: <CPU Frequency Thermal Control> on cpu2
cpu3: <ACPI CPU> on acpi0
device_attach: acpi_perf3 attach returned 6
device_attach: acpi_perf3 attach returned 6
est3: <Enhanced SpeedStep Frequency Control> on cpu3
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 12
device_attach: est3 attach returned 6
p4tcc3: <CPU Frequency Thermal Control> on cpu3
cpu4: <ACPI CPU> on acpi0
est4: <Enhanced SpeedStep Frequency Control> on cpu4
p4tcc4: <CPU Frequency Thermal Control> on cpu4
cpu5: <ACPI CPU> on acpi0
device_attach: acpi_perf5 attach returned 6
device_attach: acpi_perf5 attach returned 6
est5: <Enhanced SpeedStep Frequency Control> on cpu5
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 12
device_attach: est5 attach returned 6
p4tcc5: <CPU Frequency Thermal Control> on cpu5
cpu6: <ACPI CPU> on acpi0
est6: <Enhanced SpeedStep Frequency Control> on cpu6
p4tcc6: <CPU Frequency Thermal Control> on cpu6
cpu7: <ACPI CPU> on acpi0
device_attach: acpi_perf7 attach returned 6
device_attach: acpi_perf7 attach returned 6
est7: <Enhanced SpeedStep Frequency Control> on cpu7
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 12
device_attach: est7 attach returned 6
p4tcc7: <CPU Frequency Thermal Control> on cpu7
orm0: <ISA Option ROMs> at iomem 0xcd000-0xcdfff,0xce000-0xcefff,0xcf000-0xd4fff on isa0
atkbd: unable to set the command byte.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: unable to set the command byte.
ppc0: cannot reserve I/O port range
Timecounters tick every 1.000 msec
firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
firewire0: bus manager 0
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 12Mbps Full Speed USB v1.0
usbus6: 12Mbps Full Speed USB v1.0
usbus7: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <Intel> at usbus5
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen6.1: <Intel> at usbus6
uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
ugen7.1: <Intel> at usbus7
uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
ad4: 953869MB <Seagate ST31000340NS SN06> at ata2-master SATA150
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub6: 2 ports with 2 removable, self powered
GEOM: ad4s1: geometry does not match label (255h,63s != 16h,63s).
uhub3: 6 ports with 6 removable, self powered
uhub7: 6 ports with 6 removable, self powered
ad6: 953869MB <Seagate ST31000340NS SN06> at ata3-master SATA150
ad8: 953869MB <Seagate ST31000340NS SN06> at ata4-master SATA150
ad10: 953869MB <Seagate ST31000340NS SN06> at ata5-master SATA150
acd0: DVDR <Optiarc DVD RW AD-5240S/1.01> at ata7-master SATA150
ugen4.2: <BTC> at usbus4
ukbd0: <BTC USB Multimedia Keyboard, class 0/0, rev 1.10/1.00, addr 2> on usbus4
kbd2 at ukbd0
uhid0: <BTC USB Multimedia Keyboard, class 0/0, rev 1.10/1.00, addr 2> on usbus4
ar0: writing of DDF metadata is NOT supported yet
ar0: 952720MB <DDF RAID0 (stripe 64 KB)> status: READY
ar0: disk0 READY using ad4 at ata2-master
ar1: writing of DDF metadata is NOT supported yet
ar1: 2858160MB <DDF RAID0 (stripe 64 KB)> status: READY
ar1: disk0 READY using ad6 at ata3-master
ar1: disk1 READY using ad8 at ata4-master
ar1: disk2 READY using ad10 at ata5-master
lapic1: Forcing LINT1 to edge trigger
SMP: AP CPU #1 Launched!
lapic5: Forcing LINT1 to edge trigger
SMP: AP CPU #5 Launched!
lapic3: Forcing LINT1 to edge trigger
SMP: AP CPU #3 Launched!
lapic4: Forcing LINT1 to edge trigger
SMP: AP CPU #4 Launched!
lapic2: Forcing LINT1 to edge trigger
SMP: AP CPU #2 Launched!
lapic6: Forcing LINT1 to edge trigger
SMP: AP CPU #6 Launched!
lapic7: Forcing LINT1 to edge trigger
SMP: AP CPU #7 Launched!
ugen5.2: <No brand> at usbus5
ukbd1: <No brand KVM, class 0/0, rev 1.10/0.00, addr 2> on usbus5
ugen2.2: <American Megatrends Inc.> at usbus2
kbd3 at ukbd1
ukbd2: <Keyboard Interface> on usbus2
kbd4 at ukbd2
ums0: <No brand KVM, class 0/0, rev 1.10/0.00, addr 2> on usbus5
ums1: <Mouse Interface> on usbus2
ums1: 3 buttons and [Z] coordinates ID=0
ums0: 5 buttons and [XYZ] coordinates ID=1
Trying to mount root from ufs:/dev/ar0s1a
ugen5.3: <Logitech> at usbus5
ums2: <Logitech Optical USB Mouse, class 0/0, rev 2.00/3.40, addr 3> on usbus5
ums2: 3 buttons and [XYZ] coordinates ID=0
>Release-Note:
>Audit-Trail:
>Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200910161327.n9GDRDsX045420>