Date: Thu, 10 Jun 2004 12:51:24 -0600 From: "Chad Leigh -- Shire.Net LLC" <chad@shire.net> To: freebsd-current@freebsd.org Subject: Re: SiI 3114 SATA support (plain disk mode) Message-ID: <2C36BAD7-BB0F-11D8-B999-003065A70D30@shire.net> In-Reply-To: <C785347E-BB0E-11D8-B999-003065A70D30@shire.net> References: <30827.1084343615@critter.freebsd.dk> <C785347E-BB0E-11D8-B999-003065A70D30@shire.net>
next in thread | previous in thread | raw e-mail | index | archive | help
On Jun 10, 2004, at 12:48 PM, Chad Leigh -- Shire.Net LLC wrote: > > On May 12, 2004, at 12:33 AM, Poul-Henning Kamp wrote: > >> In message <FFA2CCA5-A3DD-11D8-A0B4-003065A70D30@shire.net>, "Chad >> Leigh -- Shi >> re.Net LLC" writes: >>> Hi >>> >>> I realize that the ATA/SATA support is evolving and ongoing. I just >>> wanted to know what the current level of support is for the SiI 3114 >>> SATA controller in -CURRENT. I want to use it with plain old disks, >>> not in any raid mode. >>> >>> I have a Tyan S2882 dual Opteron board running FreeBSD 5.2-CURRENT >>> (updated May 11) running i386 version. >> >> With the last commit from sos@ (yesterday I think) the Sil3114 works >> on my S2882. >> > > Hi All > > Ok, I finally got around to upgrading to the latest -CURRENT around > 7am UTC June 10. I re-enabled the SiL 3114 in plain disk mode in the > mb bios and booted. There is one disk plugged into the mb SATA ports > and 2 still plugged in to the Promise controller I have been using. > (I also tried it with all 3 plugged into the mb). On boot with the > latest -CURRENT, the system no longer crashes. However, even though > the BIOS lists the disks correctly on POST, FreeBSD shows no SATA > disks. (I boot off a SCSI RAID array on an Adaptec 2200S). > As a follow-on, here is the dmesg info showing both the promise and SiI 3114 controllers atapci0: <Promise PDC20375 SATA150 controller> port 0xb000-0xb07f,0xb400-0xb40f,0xbc00-0xbc3f mem 0xfeaa0000-0xfeabffff,0xfeafe000-0xfeafefff irq 16 at device 4.0 on pci3 atapci0: failed: rid 0x20 is memory, requested 4 ata2: at 0xfeafe000 on atapci0 ata3: at 0xfeafe000 on atapci0 ata4: at 0xfeafe000 on atapci0 atapci1: <SiI 3114 SATA150 controller> port 0x9c00-0x9c0f,0xa000-0xa003,0xa400-0xa407,0xa800-0xa803,0xac00-0xac07 mem 0xfeafdc00-0xfeafdfff irq 19 at device 5.0 on pci3 ata5: at 0xfeafdc00 on atapci1 ata6: at 0xfeafdc00 on atapci1 ata7: at 0xfeafdc00 on atapci1 ata8: at 0xfeafdc00 on atapci1 Thanks Chad
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?2C36BAD7-BB0F-11D8-B999-003065A70D30>