Date: Tue, 15 Jan 2013 09:24:10 +0400 From: Ruslan Makhmatkhanov <cvs-src@yandex.ru> To: John Baldwin <jhb@freebsd.org> Cc: pyunyh@gmail.com, freebsd-net@freebsd.org, Ruslan Makhmatkhanov <cvs-src@yandex.ru> Subject: Re: if_vr(4) and DFE520-TX Message-ID: <50F4E7FA.8080600@yandex.ru> In-Reply-To: <201301141515.29312.jhb@freebsd.org> References: <50F110AB.1030107@yandex.ru> <20130114061553.GA3531@michelle.cdnetworks.com> <50F3F172.5060903@yandex.ru> <201301141515.29312.jhb@freebsd.org>
next in thread | previous in thread | raw e-mail | index | archive | help
John Baldwin wrote on 15.01.2013 00:15: > On Monday, January 14, 2013 6:52:18 am Ruslan Makhmatkhanov wrote: >> YongHyeon PYUN wrote on 14.01.2013 10:15: >>> On Sat, Jan 12, 2013 at 06:49:13PM +0400, Ruslan Makhmatkhanov wrote: >>>> Ok, I got some details. It's an DFE-520TX (/C1 or rev. C1). I crafted an >>>> patch attached, but whenever kldloading the modified if_vr, I got this: >> >> [...] >> >>>> I also tried to apply VR_Q_NEEDALIGN quirk, but nothing is changed. Any >>>> hints? >>> >>> I recall D-Link was one of notorious vendor which used to >>> completely change its chip set in later revisions without notice. So >>> I'm afraid the controller you have may not be a VIA manufactured >>> one. >>> Could you take a picture of the chip set of controller and let >>> others see it? I guess it could be a RealTek 8139 or 8139C+. >> >> Here they are. Both front and back for the case (see no traces of >> RealTek though): >> >> http://s2.postimage.org/9nvkrlpqx/IMAG1040.jpg >> http://s2.postimage.org/4qi06hnrt/IMAG1041.jpg > > Did your cards come in a box with a driver CD? The manual I found online > claimed the CD contains drivers for Linux. Those might be useful for > determining which chipset these adapters use. No, it was OEM edition - so, no box, no driver CD. -- Regards, Ruslan Tinderboxing kills... the drives.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?50F4E7FA.8080600>