Date: Mon, 12 Jan 2009 17:37:39 +0100 From: Dimitry Andric <dimitry@andric.com> To: pyunyh@gmail.com Cc: freebsd-stable@freebsd.org, eugene@donpac.ru Subject: Re: FreeBSD 7.1 Breaks re and rl Network Interface Drivers Message-ID: <496B71D3.5050203@andric.com> In-Reply-To: <20090112064121.GF46346@cdnetworks.co.kr> References: <8dfae1c10901070639x67945324jeeecfcac647d7976@mail.gmail.com> <8dfae1c10901071550s69d99802p31ca7c775f3d6823@mail.gmail.com> <88527079.20090111192206@donpac.ru> <20090112011146.GC46346@cdnetworks.co.kr> <64114.83.221.215.168.1231741940.squirrel@83.221.215.168> <20090112064121.GF46346@cdnetworks.co.kr>
next in thread | previous in thread | raw e-mail | index | archive | help
On 2009-01-12 07:41, Pyun YongHyeon wrote: > I see, Unfortunately the issue was fixed in the end of 7.1-R > release process so I wanted to get more exposure before MFC. > I'll make sure to MFC to stable/7 after more testing. I'm also having problems with re's, in my case the interfaces take about 10 seconds to come up, if they come up at all. After the interfaces are up, half the time no packets go out at all. Usually it helps to bring them down via the console, wait about 10 seconds, and then bring them up again... These are the following variant: FreeBSD 7.1-STABLE #0: Mon Jan 12 14:22:11 CET 2009 [...] re0: <RealTek 8169SC/8110SC Single-chip Gigabit Ethernet> port 0xf000-0xf0ff mem 0xfdfff000-0xfdfff0ff irq 18 at device 9.0 on pci0 re0: Chip rev. 0x18000000 re0: MAC rev. 0x00000000 miibus0: <MII bus> on re0 rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0 rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto re0: Ethernet address: 00:30:18:a6:f1:a8 re0: [FILTER] re1: <RealTek 8169SC/8110SC Single-chip Gigabit Ethernet> port 0xf200-0xf2ff mem 0xfdffe000-0xfdffe0ff irq 19 at device 11.0 on pci0 re1: Chip rev. 0x18000000 re1: MAC rev. 0x00000000 miibus1: <MII bus> on re1 rgephy1: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus1 rgephy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto re1: Ethernet address: 00:30:18:a6:f1:a9 re1: [FILTER] And just FYI, r187080-r187083 that you recently committed (MFCs of r184240-184243, r184245, 185575 and r186390), don't seem to change anything for this situation. :(
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?496B71D3.5050203>