Date: Mon, 14 May 2007 00:40:25 GMT From: "Gabriel O'Brien"<ooburai@gmail.com> To: freebsd-gnats-submit@FreeBSD.org Subject: amd64/112643: amd64 dmesg for Asus M2A-VM (AMD690 chipset) Message-ID: <200705140040.l4E0ePb3012248@www.freebsd.org> Resent-Message-ID: <200705140050.l4E0o5P6062763@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 112643 >Category: amd64 >Synopsis: amd64 dmesg for Asus M2A-VM (AMD690 chipset) >Confidential: no >Severity: non-critical >Priority: low >Responsible: freebsd-amd64 >State: open >Quarter: >Keywords: >Date-Required: >Class: update >Submitter-Id: current-users >Arrival-Date: Mon May 14 00:50:05 GMT 2007 >Closed-Date: >Last-Modified: >Originator: Gabriel O'Brien >Release: 6.2-RELEASE >Organization: >Environment: FreeBSD sol.quay.net 6.2-RELEASE FreeBSD 6.2-RELEASE #0: Fri Jan 12 08:43:30 UTC 2007 root@portnoy.cse.buffalo.edu:/usr/obj/usr/src/sys/SMP amd64 >Description: I would like to report that the Asus M2A-VM would appear to work just fine out of the box. There are some ACPI AE_NOT_FOUND errors (ACPI-0438: *** Error: Looking up [LNKC] in namespace, AE_NOT_FOUND) but other than this everything else seems to be detected without trouble. On board Ethernet works as does the integrated video. Sound not tested. Please update the http://www.freebsd.org/platforms/amd64/motherboards.html page to include this board as it would appear to be a reasonable low cost option and no AMD690 chipsets are on the list yet. Copyright (c) 1992-2007 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 6.2-RELEASE #0: Fri Jan 12 08:43:30 UTC 2007 root@portnoy.cse.buffalo.edu:/usr/obj/usr/src/sys/SMP ACPI APIC Table: <ATI ASUSACPI> Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 3600+ (1899.94-MHz K8-class CPU) Origin = "AuthenticAMD" Id = 0x60fb1 Stepping = 1 Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=0x2001<SSE3,CX16> AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow+,3DNow> AMD Features2=0x11f<LAHF,CMP,<b2>,<b3>,CR8,<b8>> Cores per package: 2 real memory = 2112749568 (2014 MB) avail memory = 2028429312 (1934 MB) FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0: Changing APIC ID to 2 ioapic0 <Version 2.1> irqs 0-23 on motherboard kbd1 at kbdmux0 ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) acpi0: <ATI ASUSACPI> on motherboard ACPI-0438: *** Error: Looking up [LNKC] in namespace, AE_NOT_FOUND SearchNode 0xffffff0000c2a880 StartNode 0xffffff0000c2a880 ReturnNode 0 ACPI-0438: *** Error: Looking up [LNKD] in namespace, AE_NOT_FOUND SearchNode 0xffffff0000c2a700 StartNode 0xffffff0000c2a700 ReturnNode 0 ACPI-0438: *** Error: Looking up [LNKA] in namespace, AE_NOT_FOUND SearchNode 0xffffff0000c2e980 StartNode 0xffffff0000c2e980 ReturnNode 0 ACPI-0438: *** Error: Looking up [LNKB] in namespace, AE_NOT_FOUND SearchNode 0xffffff0000c2e800 StartNode 0xffffff0000c2e800 ReturnNode 0 ACPI-0438: *** Error: Looking up [LNKC] in namespace, AE_NOT_FOUND SearchNode 0xffffff0000c2e680 StartNode 0xffffff0000c2e680 ReturnNode 0 ACPI-0438: *** Error: Looking up [LNKD] in namespace, AE_NOT_FOUND SearchNode 0xffffff0000c2e500 StartNode 0xffffff0000c2e500 ReturnNode 0 ACPI-0438: *** Error: Looking up [LNKA] in namespace, AE_NOT_FOUND SearchNode 0xffffff0000c2e380 StartNode 0xffffff0000c2e380 ReturnNode 0 acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0 cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pci1: <display, VGA> at device 5.0 (no driver attached) pcib2: <ACPI PCI-PCI bridge> at device 7.0 on pci0 pci2: <ACPI PCI bus> on pcib2 re0: <RealTek 8168B/8111B PCIe Gigabit Ethernet> port 0xee00-0xeeff mem 0xfdaff000-0xfdafffff irq 19 at device 0.0 on pci2 miibus0: <MII bus> on re0 rgephy0: <RTL8169S/8110S media interface> on miibus0 rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto re0: Ethernet address: 00:1a:92:6f:ec:cf re0: [FAST] atapci0: <GENERIC ATA controller> port 0xff00-0xff07,0xfe00-0xfe03,0xfd00-0xfd07,0xfc00-0xfc03,0xfb00-0xfb0f mem 0xfe02f000-0xfe02f3ff irq 22 at device 18.0 on pci0 ata2: <ATA channel 0> on atapci0 ata3: <ATA channel 1> on atapci0 ohci0: <OHCI (generic) USB controller> mem 0xfe02e000-0xfe02efff irq 16 at device 19.0 on pci0 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered ohci1: <OHCI (generic) USB controller> mem 0xfe02d000-0xfe02dfff irq 17 at device 19.1 on pci0 ohci1: [GIANT-LOCKED] usb1: OHCI version 1.0, legacy support usb1: SMM does not respond, resetting usb1: <OHCI (generic) USB controller> on ohci1 usb1: USB revision 1.0 uhub1: ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered ohci2: <OHCI (generic) USB controller> mem 0xfe02c000-0xfe02cfff irq 18 at device 19.2 on pci0 ohci2: [GIANT-LOCKED] usb2: OHCI version 1.0, legacy support usb2: SMM does not respond, resetting usb2: <OHCI (generic) USB controller> on ohci2 usb2: USB revision 1.0 uhub2: ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered ohci3: <OHCI (generic) USB controller> mem 0xfe02b000-0xfe02bfff irq 17 at device 19.3 on pci0 ohci3: [GIANT-LOCKED] usb3: OHCI version 1.0, legacy support usb3: SMM does not respond, resetting usb3: <OHCI (generic) USB controller> on ohci3 usb3: USB revision 1.0 uhub3: ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered ohci4: <OHCI (generic) USB controller> mem 0xfe02a000-0xfe02afff irq 18 at device 19.4 on pci0 ohci4: [GIANT-LOCKED] usb4: OHCI version 1.0, legacy support usb4: SMM does not respond, resetting usb4: <OHCI (generic) USB controller> on ohci4 usb4: USB revision 1.0 uhub4: ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub4: 2 ports with 2 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe029000-0xfe0290ff irq 19 at device 19.5 on pci0 ehci0: [GIANT-LOCKED] usb5: EHCI version 1.0 usb5: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4 usb5: <EHCI (generic) USB 2.0 controller> on ehci0 usb5: USB revision 2.0 uhub5: ATI EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub5: 10 ports with 10 removable, self powered pci0: <serial bus, SMBus> at device 20.0 (no driver attached) atapci1: <GENERIC ATA controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf900-0xf90f at device 20.1 on pci0 ata0: <ATA channel 0> on atapci1 ata1: <ATA channel 1> on atapci1 pci0: <multimedia> at device 20.2 (no driver attached) isab0: <PCI-ISA bridge> at device 20.3 on pci0 isa0: <ISA bus> on isab0 pcib3: <ACPI PCI-PCI bridge> at device 20.4 on pci0 pci3: <ACPI PCI bus> on pcib3 acpi_tz0: <Thermal Zone> on acpi0 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A ppc0: <Standard parallel printer port> port 0x378-0x37f irq 7 on acpi0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 1.000 msec acd0: DVDR <PIONEER DVD-RW DVR-112D/1.15> at ata0-master UDMA33 ad4: 238475MB <Seagate ST3250620AS 3.AAK> at ata2-master UDMA33 SMP: AP CPU #1 Launched! Trying to mount root from ufs:/dev/ad4s1a re0: link state changed to UP >How-To-Repeat: >Fix: >Release-Note: >Audit-Trail: >Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200705140040.l4E0ePb3012248>