Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 10 Apr 2004 08:58:08 -0700
From:      "Kevin Oberman" <oberman@es.net>
To:        Thorsten Greiner <thorsten@tgreiner.net>
Cc:        current@freebsd.org
Subject:   Re: Recent -CURRENT doesn't find ata controller 
Message-ID:  <20040410155808.347A75D08@ptavv.es.net>
In-Reply-To: Your message of "Sat, 10 Apr 2004 13:37:24 %2B0200." <20040410113724.GA704@tybalt.greiner.local> 

next in thread | previous in thread | raw e-mail | index | archive | help
> Date: Sat, 10 Apr 2004 13:37:24 +0200
> From: Thorsten Greiner <thorsten@tgreiner.net>
> Sender: owner-freebsd-current@freebsd.org
> 
> 
> --l76fUT7nc3MelDdI
> Content-Type: multipart/mixed; boundary="Q68bSM7Ycu6FN28Q"
> Content-Disposition: inline
> 
> 
> --Q68bSM7Ycu6FN28Q
> Content-Type: text/plain; charset=us-ascii
> Content-Disposition: inline
> Content-Transfer-Encoding: quoted-printable
> 
> Hi list,
> 
> a kernel built from a recent cvsup doesn't recognize my ata
> controller. I suspect this is related to the recent PCI changes by
> Warner Losh. The attached dmesg shows a successful boot by a kernel
> built from Apr 6th sources.
> 
> Today's faulty one differs from the sucessful boot in that the lines
> 
>     ata0: at 0x1f0 irq 14 on atapci0
>     ata1: at 0x170 irq 15 on atapci0
> 
> are missing. Instead the line
> 
>     atapci0: Bus reserved 0x10 bytes for rid 0x20 type 4 at 0xbfa0
> 
> is displayed. Of course this means that the kernel cannot find its
> root device and panics later...
> 
> Please find a dmesg from a working kernel and my kernel config
> attached.

OK. I see the same thing on my IBM T30. But I can narrow it down as I
have a working kernel from a cvsup on the evening of April 8 and a
non-working on from the morning of April 9, just after imp added his
ACPI patches. Verbose boot shows nothing obvious (at least to me) I'm
pretty sure that no changes were made to the ata drivers. The ata disks
are simply not seen.

I will attach te verbose boot. For now, I am stuck with a kernel from
about 08:00 PT yesterday, I suspect. (I'm building a kernel now to
confirm it.)
-- 
R. Kevin Oberman, Network Engineer
Energy Sciences Network (ESnet)
Ernest O. Lawrence Berkeley National Laboratory (Berkeley Lab)
E-mail: oberman@es.net			Phone: +1 510 486-8634

----------------------------------------------------
SMAP type=01 base=0000000000000000 len=000000000009f000
SMAP type=02 base=000000000009f000 len=0000000000001000
SMAP type=02 base=00000000000d2000 len=0000000000002000
SMAP type=02 base=00000000000dc000 len=0000000000024000
SMAP type=01 base=0000000000100000 len=000000001fe70000
SMAP type=03 base=000000001ff70000 len=000000000000e000
SMAP type=04 base=000000001ff7e000 len=0000000000002000
SMAP type=02 base=000000001ff80000 len=0000000000080000
SMAP type=02 base=00000000ff800000 len=0000000000400000
SMAP type=02 base=00000000ffc00000 len=0000000000400000
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.2-CURRENT #89: Fri Apr  9 20:01:00 PDT 2004
    root@puppeteer.es.net:/usr/obj/usr/src/sys/IBM-T30-D
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0805000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc0805278.
Preloaded elf module "/boot/kernel/if_wi.ko" at 0xc08052c8.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0805374.
Calibrating clock(s) ... i8254 clock: 1193146 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1198989464 Hz
CPU: Intel(R) Pentium(R) 4 Mobile CPU 1.80GHz (1198.99-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf24  Stepping = 4
  Features=0x3febf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
real memory  = 536281088 (511 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c26000 - 0x000000001f641fff, 513916928 bytes (125468 pages)
avail memory = 514985984 (491 MB)
bios32: Found BIOS32 Service Directory header at 0xc00f6fe0
bios32: Entry = 0xfd7e0 (c00fd7e0)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0xfd770+0x18e
pnpbios: Found PnP BIOS data at 0xc00f7040
pnpbios: Entry = f0000:9d54  Rev = 1.0
pnpbios: Event flag at 4b4
Other BIOS signatures found:
wlan: <802.11 Link Layer>
null: <null device, zero device>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
random: <entropy source, Software, Yarrow>
cpu0 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <IBM TP-1I> on motherboard
acpi0: [GIANT-LOCKED]
acpi_ec0: <Embedded Controller: ECDT, GPE 0x1c, GLK> port 0x66,0x62 on acpi0
pci_open(1):	mode 1 addr port (0x0cf8) is 0x8000f904
pci_open(1a):	mode1res=0x80000000 (0x80000000)
pci_cfgcheck:	device 0 [class=060000] [hdr=00] is there (id=1a308086)
pcibios: BIOS version 2.10
Found $PIR table, 14 entries at 0xc00fdeb0
PCI-Only Interrupts: none
Location  Bus Device Pin  Link  IRQs
embedded    0    0    A   0x60  3 4 5 6 7 9 10 11 12 14 15
embedded    0    0    B   0x61  3 4 5 6 7 9 10 11 12 14 15
embedded    0    0    C   0x62  3 4 5 6 7 9 10 11 12 14 15
embedded    0    0    D   0x63  3 4 5 6 7 9 10 11 12 14 15
embedded    0    2    A   0x60  3 4 5 6 7 9 10 11 12 14 15
embedded    0    2    B   0x61  3 4 5 6 7 9 10 11 12 14 15
embedded    0    1    A   0x60  3 4 5 6 7 9 10 11 12 14 15
embedded    0    1    B   0x61  3 4 5 6 7 9 10 11 12 14 15
embedded    1    0    A   0x60  3 4 5 6 7 9 10 11 12 14 15
embedded    1    0    B   0x61  3 4 5 6 7 9 10 11 12 14 15
embedded    0   30    A   0x60  3 4 5 6 7 9 10 11 12 14 15
embedded    0   30    B   0x61  3 4 5 6 7 9 10 11 12 14 15
embedded    0   30    C   0x62  3 4 5 6 7 9 10 11 12 14 15
embedded    0   30    D   0x63  3 4 5 6 7 9 10 11 12 14 15
embedded    2    0    A   0x60  3 4 5 6 7 9 10 11 12 14 15
embedded    2    0    B   0x61  3 4 5 6 7 9 10 11 12 14 15
slot 1      2    2    A   0x62  3 4 5 6 7 9 10 11 12 14 15
slot 1      2    2    B   0x63  3 4 5 6 7 9 10 11 12 14 15
embedded    2    3    A   0x60  3 4 5 6 7 9 10 11 12 14 15
embedded    2    3    B   0x61  3 4 5 6 7 9 10 11 12 14 15
embedded    2    3    C   0x62  3 4 5 6 7 9 10 11 12 14 15
embedded    2    3    D   0x63  3 4 5 6 7 9 10 11 12 14 15
slot 2      9    0    A   0x60  3 4 5 6 7 9 10 11 12 14 15
slot 2      9    0    B   0x61  3 4 5 6 7 9 10 11 12 14 15
slot 2      9    0    C   0x62  3 4 5 6 7 9 10 11 12 14 15
slot 2      9    0    D   0x63  3 4 5 6 7 9 10 11 12 14 15
embedded    9    1    A   0x61  3 4 5 6 7 9 10 11 12 14 15
embedded    9    2    A   0x62  3 4 5 6 7 9 10 11 12 14 15
embedded    9    2    B   0x62  3 4 5 6 7 9 10 11 12 14 15
embedded    2    8    A   0x68  3 4 5 6 7 9 10 11 12 14 15
embedded    0   29    A   0x60  3 4 5 6 7 9 10 11 12 14 15
embedded    0   29    B   0x63  3 4 5 6 7 9 10 11 12 14 15
embedded    0   29    C   0x62  3 4 5 6 7 9 10 11 12 14 15
embedded    0   29    D   0x6b  3 4 5 6 7 9 10 11 12 14 15
embedded    0   31    A   0x62  3 4 5 6 7 9 10 11 12 14 15
embedded    0   31    B   0x61  3 4 5 6 7 9 10 11 12 14 15
AcpiOsDerivePciId: bus 0 dev 31 func 0
AcpiOsDerivePciId: bus 0 dev 0 func 0
AcpiOsDerivePciId: bus 2 dev 0 func 0
AcpiOsDerivePciId: bus 2 dev 0 func 1
acpi0: Power Button (fixed)
ACPI timer looks GOOD min = 4, max = 5, width = 1
ACPI timer looks GOOD min = 4, max = 5, width = 1
ACPI timer looks GOOD min = 4, max = 5, width = 1
ACPI timer looks GOOD min = 4, max = 5, width = 1
ACPI timer looks GOOD min = 4, max = 5, width = 1
ACPI timer looks GOOD min = 4, max = 5, width = 1
ACPI timer looks GOOD min = 4, max = 5, width = 1
ACPI timer looks GOOD min = 4, max = 5, width = 1
ACPI timer looks GOOD min = 4, max = 5, width = 1
ACPI timer looks GOOD min = 4, max = 5, width = 1
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
acpi_cpu0: <CPU> port 0x530-0x537 on acpi0
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
acpi_tz0: <Thermal Zone> port 0x530-0x537 on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
---- initial configuration ------------------------
\_SB_.LNKA irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 0.29.0
\_SB_.LNKD irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 0.29.1
\_SB_.LNKC irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 0.29.2
\_SB_.LNKH irq   0: [  3  4  5  6  7  9 10 11] low,level,sharable 0.29.3
\_SB_.LNKC irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 0.31.0
\_SB_.LNKB irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 0.31.1
---- before setting priority for links ------------
\_SB_.LNKH:
	interrupts:	     3     4     5     6     7     9    10    11
	penalty:	  1110  1110   110  1110  1110   110   110   610
	references:	1
	priority:	0
---- before fixup boot-disabled links -------------
\_SB_.LNKH:
	interrupts:	     3     4     5     6     7     9    10    11
	penalty:	  1110  1110   110  1110  1110   110   110   610
	references:	1
	priority:	672
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\_SB_.LNKA irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 0.29.0
\_SB_.LNKD irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 0.29.1
\_SB_.LNKC irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 0.29.2
\_SB_.LNKH irq  10: [  3  4  5  6  7  9 10 11] low,level,sharable 0.29.3
\_SB_.LNKC irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 0.31.0
\_SB_.LNKB irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 0.31.1
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
	map[10]: type 3, range 32, base e0000000, size 26, enabled
found->	vendor=0x8086, dev=0x1a30, revid=0x04
	bus=0, slot=0, func=0
	class=06-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x1a31, revid=0x04
	bus=0, slot=1, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0x00a0, cachelnsz=0 (dwords)
	lattimer=0x60 (2880 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
	map[20]: type 4, range 32, base 00001800, size  5, enabled
pcib0: matched entry for 0.29.INTA (src \_SB_.LNKA)
pcib0: slot 29 INTA is routed to irq 11
found->	vendor=0x8086, dev=0x2482, revid=0x02
	bus=0, slot=29, func=0
	class=0c-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	map[20]: type 4, range 32, base 00001820, size  5, enabled
pcib0: matched entry for 0.29.INTB (src \_SB_.LNKD)
pcib0: slot 29 INTB is routed to irq 11
found->	vendor=0x8086, dev=0x2484, revid=0x02
	bus=0, slot=29, func=1
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	map[20]: type 4, range 32, base 00001840, size  5, enabled
pcib0: matched entry for 0.29.INTC (src \_SB_.LNKC)
pcib0: slot 29 INTC is routed to irq 11
found->	vendor=0x8086, dev=0x2487, revid=0x02
	bus=0, slot=29, func=2
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=11
found->	vendor=0x8086, dev=0x2448, revid=0x42
	bus=0, slot=30, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0x0080, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x248c, revid=0x02
	bus=0, slot=31, func=0
	class=06-01-00, hdrtype=0x00, mfdev=1
	cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	map[10]: type 4, range 32, base 000001f0, size  3, enabled
	map[18]: type 4, range 32, base 00000170, size  3, enabled
	map[20]: type 4, range 32, base 00001860, size  4, enabled
	map[24]: type 1, range 32, base 00000000, size 10, memory disabled
found->	vendor=0x8086, dev=0x248a, revid=0x02
	bus=0, slot=31, func=1
	class=01-01-8a, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=255
	map[20]: type 4, range 32, base 00001880, size  5, enabled
pcib0: matched entry for 0.31.INTB (src \_SB_.LNKB)
pcib0: slot 31 INTB is routed to irq 11
found->	vendor=0x8086, dev=0x2483, revid=0x02
	bus=0, slot=31, func=3
	class=0c-05-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	map[10]: type 4, range 32, base 00001c00, size  8, enabled
	map[14]: type 4, range 32, base 000018c0, size  6, enabled
pcib0: matched entry for 0.31.INTB (src \_SB_.LNKB)
pcib0: slot 31 INTB is routed to irq 11
found->	vendor=0x8086, dev=0x2485, revid=0x02
	bus=0, slot=31, func=5
	class=04-01-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	map[10]: type 4, range 32, base 00002400, size  8, enabled
	map[14]: type 4, range 32, base 00002000, size  7, enabled
pcib0: matched entry for 0.31.INTB (src \_SB_.LNKB)
pcib0: slot 31 INTB is routed to irq 11
found->	vendor=0x8086, dev=0x2486, revid=0x02
	bus=0, slot=31, func=6
	class=07-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
agp0: <Intel 82845 host to AGP bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0
agp0: Bus reserved 0x4000000 bytes for rid 0x10 type 3 at 0xe0000000
agp0: allocating GATT for aperture of size 64M
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0x3000-0x3fff
pcib1:   memory decode     0xd0100000-0xd01fffff
pcib1:   prefetched decode 0xe8000000-0xefffffff
---- initial configuration ------------------------
\_SB_.LNKA irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 1.0.0
\_SB_.LNKB irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 1.0.1
---- before setting priority for links ------------
---- before fixup boot-disabled links -------------
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\_SB_.LNKA irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 1.0.0
\_SB_.LNKB irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 1.0.1
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=1
	map[10]: type 3, range 32, base e8000000, size 27, enabled
pcib1: device (null) requested decoded memory range 0xe8000000-0xefffffff
	map[14]: type 4, range 32, base 00003000, size  8, enabled
pcib1: device (null) requested decoded I/O range 0x3000-0x30ff
	map[18]: type 1, range 32, base d0100000, size 16, enabled
pcib1: device (null) requested decoded memory range 0xd0100000-0xd010ffff
pcib1: matched entry for 1.0.INTA (src \_SB_.LNKA)
pcib1: slot 0 INTA is routed to irq 11
found->	vendor=0x1002, dev=0x4c57, revid=0x00
	bus=1, slot=0, func=0
	class=03-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0387, statreg=0x02b0, cachelnsz=8 (dwords)
	lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
pci1: <display, VGA> at device 0.0 (no driver attached)
uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0x1800-0x181f irq 11 at device 29.0 on pci0
uhci0: Bus reserved 0x20 bytes for rid 0x20 type 4 at 0x1800
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0x1820-0x183f irq 11 at device 29.1 on pci0
uhci1: Bus reserved 0x20 bytes for rid 0x20 type 4 at 0x1820
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> port 0x1840-0x185f irq 11 at device 29.2 on pci0
uhci2: Bus reserved 0x20 bytes for rid 0x20 type 4 at 0x1840
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib2:   secondary bus     2
pcib2:   subordinate bus   8
pcib2:   I/O decode        0x4000-0x8fff
pcib2:   memory decode     0xd0200000-0xdfffffff
pcib2:   prefetched decode 0xf0000000-0xf80fffff
pcib2:   Subtractively decoded bridge.
---- initial configuration ------------------------
\_SB_.LNKA irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 2.0.0
\_SB_.LNKB irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 2.0.1
\_SB_.LNKC irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 2.0.2
\_SB_.LNKA irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 2.1.0
\_SB_.LNKC irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 2.2.0
\_SB_.LNKD irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 2.2.1
\_SB_.LNKA irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 2.2.2
\_SB_.LNKB irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 2.2.3
\_SB_.LNKC irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 2.4.0
\_SB_.LNKD irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 2.4.1
\_SB_.LNKA irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 2.4.2
\_SB_.LNKB irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 2.4.3
\_SB_.LNKE irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 2.8.0
---- before setting priority for links ------------
---- before fixup boot-disabled links -------------
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\_SB_.LNKA irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 2.0.0
\_SB_.LNKB irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 2.0.1
\_SB_.LNKC irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 2.0.2
\_SB_.LNKA irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 2.1.0
\_SB_.LNKC irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 2.2.0
\_SB_.LNKD irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 2.2.1
\_SB_.LNKA irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 2.2.2
\_SB_.LNKB irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 2.2.3
\_SB_.LNKC irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 2.4.0
\_SB_.LNKD irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 2.4.1
\_SB_.LNKA irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 2.4.2
\_SB_.LNKB irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 2.4.3
\_SB_.LNKE irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 2.8.0
pci2: <ACPI PCI bus> on pcib2
pci2: physical bus=2
	map[10]: type 1, range 32, base 50000000, size 12, enabled
pcib2: device (null) requested decoded memory range 0x50000000-0x50000fff
pcib2: matched entry for 2.0.INTA (src \_SB_.LNKA)
pcib2: slot 0 INTA is routed to irq 11
found->	vendor=0x104c, dev=0xac55, revid=0x01
	bus=2, slot=0, func=0
	class=06-07-00, hdrtype=0x02, mfdev=1
	cmdreg=0x0107, statreg=0x0210, cachelnsz=8 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0xc0 (48000 ns), maxlat=0x03 (750 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 1, range 32, base 51000000, size 12, enabled
pcib2: device (null) requested decoded memory range 0x51000000-0x51000fff
pcib2: matched entry for 2.0.INTB (src \_SB_.LNKB)
pcib2: slot 0 INTB is routed to irq 11
found->	vendor=0x104c, dev=0xac55, revid=0x01
	bus=2, slot=0, func=1
	class=06-07-00, hdrtype=0x02, mfdev=1
	cmdreg=0x0107, statreg=0x0210, cachelnsz=8 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0xc0 (48000 ns), maxlat=0x03 (750 ns)
	intpin=b, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 3, range 32, base f8000000, size 12, enabled
pcib2: device (null) requested decoded memory range 0xf8000000-0xf8000fff
pcib2: matched entry for 2.2.INTA (src \_SB_.LNKC)
pcib2: slot 2 INTA is routed to irq 11
found->	vendor=0x1260, dev=0x3873, revid=0x01
	bus=2, slot=2, func=0
	class=02-80-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0117, statreg=0x0290, cachelnsz=8 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 1, range 32, base d0200000, size 12, enabled
pcib2: device (null) requested decoded memory range 0xd0200000-0xd0200fff
	map[14]: type 4, range 32, base 00008000, size  6, enabled
pcib2: device (null) requested decoded I/O range 0x8000-0x803f
pcib2: matched entry for 2.8.INTA (src \_SB_.LNKE)
pcib2: slot 8 INTA is routed to irq 11
found->	vendor=0x8086, dev=0x1031, revid=0x42
	bus=2, slot=8, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0117, statreg=0x0290, cachelnsz=8 (dwords)
	lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
cbb0: <TI1520 PCI-CardBus Bridge> mem 0x50000000-0x50000fff irq 11 at device 0.0 on pci2
cbb0: Bus reserved 0x1000 bytes for rid 0x10 type 3 at 0x50000000
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [MPSAFE]
cbb0: PCI Configuration space:
  0x00: 0xac55104c 0x02100107 0x06070001 0x00824008 
  0x10: 0x50000000 0x020000a0 0xb0050302 0xfffff000 
  0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 
  0x30: 0x00000000 0xfffffffc 0x00000000 0x0740010b 
  0x40: 0x05121014 0x00000001 0x00000000 0x00000000 
  0x50: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x60: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x70: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x80: 0x0844d071 0x00000000 0x00000000 0x01d21022 
  0x90: 0x406402c0 0x00000000 0x00000000 0x00000000 
  0xa0: 0xfe120001 0x00c00000 0x00000001 0x0000000f 
  0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 
cbb1: <TI1520 PCI-CardBus Bridge> mem 0x51000000-0x51000fff irq 11 at device 0.1 on pci2
cbb1: Bus reserved 0x1000 bytes for rid 0x10 type 3 at 0x51000000
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
cbb1: [MPSAFE]
cbb1: PCI Configuration space:
  0x00: 0xac55104c 0x02100107 0x06070001 0x00824008 
  0x10: 0x51000000 0x020000a0 0xb0080602 0xfffff000 
  0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 
  0x30: 0x00000000 0xfffffffc 0x00000000 0x0740020b 
  0x40: 0x05121014 0x00000001 0x00000000 0x00000000 
  0x50: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x60: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x70: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x80: 0x0844d071 0x00000000 0x00000000 0x01d21022 
  0x90: 0x406402c0 0x00000000 0x00000000 0x00000000 
  0xa0: 0xfe120001 0x00c00000 0x00000001 0x0000000f 
  0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 
wi0: <Intersil Prism2.5> mem 0xf8000000-0xf8000fff irq 11 at device 2.0 on pci2
wi0: Bus reserved 0x1000 bytes for rid 0x10 type 3 at 0xf8000000
wi0: [GIANT-LOCKED]
wi0: using RF:PRISM2.5 MAC:ISL3874A(Mini-PCI)
wi0: Intersil Firmware: Primary (1.1.1), Station (1.7.4)
wi0: bpf attached
wi0: Ethernet address: 00:05:3c:03:86:b9
wi0: bpf attached
wi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
wi0: bpf attached
fxp0: <Intel 82801CAM (ICH3) Pro/100 VE Ethernet> port 0x8000-0x803f mem 0xd0200000-0xd0200fff irq 11 at device 8.0 on pci2
fxp0: Bus reserved 0x1000 bytes for rid 0x10 type 3 at 0xd0200000
fxp0: using memory space register mapping
fxp0: PCI IDs: 8086 1031 1014 0209 0042
fxp0: Dynamic Standby mode is disabled
miibus0: <MII bus> on fxp0
inphy0: <i82562ET 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: bpf attached
fxp0: Ethernet address: 00:09:6b:c2:86:92
fxp0: [GIANT-LOCKED]
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 UDMA100 controller> port 0x1860-0x186f,0x170-0x177,0x1f0-0x1f7 at device 31.1 on pci0
atapci0: Bus reserved 0x10 bytes for rid 0x20 type 4 at 0x1860
ichsmb0: <Intel 82801CA (ICH3) SMBus controller> port 0x1880-0x189f irq 11 at device 31.3 on pci0
ichsmb0: Bus reserved 0x20 bytes for rid 0x20 type 4 at 0x1880
ichsmb0: [GIANT-LOCKED]
smbus0: <System Management Bus> on ichsmb0
smb0: <SMBus generic I/O> on smbus0
pcm0: <Intel ICH3 (82801CA)> port 0x18c0-0x18ff,0x1c00-0x1cff irq 11 at device 31.5 on pci0
pcm0: Bus reserved 0x100 bytes for rid 0x10 type 4 at 0x1c00
pcm0: Bus reserved 0x40 bytes for rid 0x14 type 4 at 0x18c0
pcm0: [GIANT-LOCKED]
pcm0: <Analog Devices AD1881A AC97 Codec (id = 0x41445348)>
pcm0: Codec features headphone, 6 bit master volume, Analog Devices Phat Stereo
pcm0: Primary codec extended features variable rate PCM
pcm0: sndbuf_setmap 2f3000, 4000; 0xdbea7000 -> 2f3000
pcm0: sndbuf_setmap 2fa000, 4000; 0xdbeab000 -> 2fa000
pci0: <simple comms> at device 31.6 (no driver attached)
pci0:31:6: setting power state D3
unknown: not probed (disabled)
unknown: not probed (disabled)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x54ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
psmcpnp0 irq 12 on acpi0
psm0: current command byte:0047
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fa
kbdc: RESET_AUX status:00aa
kbdc: RESET_AUX ID:0000
kbdc: RESET_AUX return code:00fa
kbdc: RESET_AUX status:00aa
kbdc: RESET_AUX ID:0000
psm: status 00 02 64
psm: status 00 00 64
psm: status 00 03 64
psm: status 00 03 64
psm: data 08 00 00
psm: status 10 00 64
psm: status 00 02 64
psm: data 08 00 00
psm: status 00 02 64
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A, console
unknown: not probed (disabled)
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0x41 0x41 0x41 0x41
sio1: probe failed test(s): 0 1 2 4 6 7 9
acpi_ec0: Changing GLK from 1 to 0
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
unknown: not probed (disabled)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
acpi_cmbat0: <Control Method Battery> on acpi0
unknown: not probed (disabled)
acpi_acad0: <AC Adapter> on acpi0
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
unknown: not probed (disabled)
unknown: not probed (disabled)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
unknown: not probed (disabled)
unknown: not probed (disabled)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
unknown: not probed (disabled)
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0x41 0x41 0x41 0x41
sio1: probe failed test(s): 0 1 2 4 6 7 9
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
unknown: not probed (disabled)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
unknown: not probed (disabled)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
unknown: not probed (disabled)
unknown: not probed (disabled)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
sio: sio0 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xe0000-0xeffff,0xdc000-0xdffff,0xd1000-0xd1fff,0xd0000-0xd0fff,0xc0000-0xcffff on isa0
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
ppc0: not probed (disabled)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio1: not probed (disabled)
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
vga0: vga: WARNING: video mode switching is not fully supported on this adapter
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 64 4f 4f 88 59 9e 
9a 1f 00 4f 0d 0e 00 00 07 80 92 83 8f 28 1f 8f 
9b a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
EGA/VGA parameters to be used for mode 24
50 18 10 00 00 00 03 00 02 67 64 4f 4f 88 59 9e 
9a 1f 00 4f 0d 0e 00 00 07 80 92 83 8f 28 1f 8f 
9b a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 1198989464 Hz quality 800
Timecounters tick every 10.000 msec
lo0: bpf attached
pcm0: measured ac97 link rate at 47995 Hz, will use 48000 Hz
acpi_cpu0: set speed to 100.0%
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
acpi_cmbat0: battery initialization start
acpi_ec0: info: new max delay is 25 us
acpi_cmbat0: battery initialization done, tried 1 times
acpi_acad0: acline initialization start
system power profile changed to 'economy'
acpi_acad0: Off Line
Mounting root from ufs:/dev/ad0s2a
setrootbyname failed
ffs_mountroot: can't find rootvp
Root mount failed: 6

Manual root filesystem specification:
  <fstype>:<device>  Mount <device> using filesystem <fstype>
                       eg. ufs:da0s1a
  ?                  List valid disk boot devices
  <empty line>       Abort manual input

mountroot>



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040410155808.347A75D08>