Date: Mon, 30 Aug 2004 13:36:09 +0200 From: Bernd Walter <ticso@cicely12.cicely.de> To: Poul-Henning Kamp <phk@phk.freebsd.dk> Cc: ticso@cicely.de Subject: Re: 5.3 beta1 is no go for me. Message-ID: <20040830113609.GJ59909@cicely12.cicely.de> In-Reply-To: <48170.1093864941@critter.freebsd.dk> References: <20040830105358.GH59909@cicely12.cicely.de> <48170.1093864941@critter.freebsd.dk>
next in thread | previous in thread | raw e-mail | index | archive | help
On Mon, Aug 30, 2004 at 01:22:21PM +0200, Poul-Henning Kamp wrote: > In message <20040830105358.GH59909@cicely12.cicely.de>, Bernd Walter writes: > > >Do have the ability to compile and boot a custom kernel? > > Not without some effort. I'd have to set it up for diskless boot > and cross compile the kernels. > > >If yes please try out EISA_SLOTS=1 in your kernel config. > >It looks like you could set hw.eisa_slots at loader stage, but I > >can't read out that sysctl on a running 4100, so I'm not shure > >that this really works. > > It does, now it gets further, see below. OK. Can you test at which value things break so we can limit in GENERIC. The default should be 10 or so. > >BTW: how many physical EISA slots are there in an AS1000? > > No idea and I'm not able to open the machine with my arm in a sling. Oh - I didn't know. > OK set hint.hw.eisa_slots=1 > OK boot -v > Entering /boot/kernel/kernel at 0xfffffc0000347100... > GDB: debug ports: sio > GDB: current port: sio > KDB: debugger backends: ddb gdb > KDB: current backend: ddb > Copyright (c) 1992-2004 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD 5.3-BETA1 #0: Mon Aug 23 22:50:09 UTC 2004 > root@ds10.wbnet:/usr/obj/usr/src/sys/GENERIC > Preloaded elf kernel "/boot/kernel/kernel" at 0xfffffc0000e02000. > Preloaded mfs_root "/boot/mfsroot" at 0xfffffc0000e020e0. > AlphaServer 1000/1000A > AlphaServer 1000A 5/400, 400MHz > 8192 byte page size, 1 processor. > CPU: EV56 (21164A) major=7 minor=2 extensions=0x1<BWX> > OSF PAL rev: 0x1000600020117 > real memory = 182484992 (174 MB) > Physical memory chunk(s): > 0x00e24000 - 0x0ad13fff, 166658048 bytes (20344 pages) > avail memory = 164610048 (156 MB) > null: <null device, zero device> > random: <entropy source, Software, Yarrow> > mem: <memory> > cia0: <2117x Core Logic chipset> > cia0: ALCOR/ALCOR2, pass 3 > cia0: extended capabilities: 21<DWEN,BWEN> > pcib0: <2117x PCI host bus adapter> on cia0 > pci0: <PCI bus> on pcib0 > pci0: physical bus=0 > found-> vendor=0x8086, dev=0x0482, revid=0x05 > bus=0, slot=7, func=0 > class=00-00-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0007, statreg=0x0200, cachelnsz=0 (dwords) > lattimer=0xf8 (7440 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > found-> vendor=0x1011, dev=0x0001, revid=0x02 > bus=0, slot=8, func=0 > class=06-04-00, hdrtype=0x01, mfdev=0 > cmdreg=0x0007, statreg=0x0280, cachelnsz=16 (dwords) > lattimer=0xf8 (7440 ns), mingnt=0x27 (9750 ns), maxlat=0x00 (0 ns) > map[10]: type 4, range 32, base 00010000, size 7, enabled > map[14]: type 1, range 32, base 81301000, size 7, enabled > found-> vendor=0x1011, dev=0x0002, revid=0x24 > bus=0, slot=12, func=0 > class=02-00-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0007, statreg=0x0280, cachelnsz=0 (dwords) > lattimer=0xff (7650 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=a, irq=3 > map[10]: type 1, range 32, base 81300000, size 12, enabled > map[14]: type 4, range 32, base 00010080, size 6, enabled > map[18]: type 1, range 32, base 81100000, size 20, enabled > found-> vendor=0x8086, dev=0x1229, revid=0x08 > bus=0, slot=13, func=0 > class=02-00-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0007, statreg=0x0290, cachelnsz=16 (dwords) > lattimer=0xff (7650 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns) > intpin=a, irq=5 > powerspec 2 supports D0 D1 D2 D3 current D0 > eisab0: <PCI-EISA bridge> at device 7.0 on pci0 > eisa0: <EISA bus> on eisab0 > mainboard0: <DEC5000 (System Board)> on eisa0 slot 0 > isa0: <ISA bus> on eisab0 Looks good so far. > fxp0: <Intel 82559 Pro/100 Ethernet> port 0x10080-0x100bf mem 0x81100000-0x811fffff,0x81300000-0x81300fff irq 5 at device 13.0 on pci0 > fxp0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0x81300000 > fxp0: using memory space register mapping > fxp0: PCI IDs: 8086 1229 8086 000c 0008 > fxp0: Dynamic Standby mode is disabled > miibus0: <MII bus> on fxp0 > inphy0: <i82555 10/100 media interface> on miibus0 > inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > fxp0: bpf attached > fxp0: Ethernet address: 00:d0:b7:49:e6:c9 > fxp0: interrupting at CIA irq 5 > fxp0: [GIANT-LOCKED] The last PCI chip - now it should continue with ISA devices. Could still have something to do with the EISA bridge :( Missing ISA range mapping maybe? > > halted CPU 0 > > halt code = 7 > machine check while in PAL mode > PC = 18100 > >>>trace > trace: No such command > >>> -- B.Walter BWCT http://www.bwct.de bernd@bwct.de info@bwct.de
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040830113609.GJ59909>