Date: Thu, 18 Nov 1999 13:40:12 -0700 From: "Dewey, Michael" <mdewey@uswest.com> To: "Dewey, Michael" <mdewey@uswest.com>, freebsd-questions@FreeBSD.ORG, "'Jonathan E. Lyons'" <parrothd@midwest.net> Subject: RE: Terminal mode in ppp Message-ID: <690C7049A180D11194BD00805F6F2CE003BEB15E@denex03.uswmedia.com>
next in thread | raw e-mail | index | archive | help
I'm pretty sure that I am using the right COM port (I've tried most of the other ones as well just to make sure). I get the following when I type show modem: Name: deflink State: open, no carrier Device: /dev/cuaa1 Link Type: interactive Connect Count: 1 Physical outq: 0 Queued Packets: 0 Phone Number: N/A Defaults: Device List: /dev/cuaa1 Characteristics: 38400bps, cs8, no parity, CTS/RTS on Is there something I could have forgot to configure with my modem? I did a MAKEDEV for cuaa1 and tun0, and put a line about sio1 in my kernel config file. Is there anything else? Mike > ---------- > From: Jonathan E. Lyons > Sent: Thursday, November 18, 1999 12:24 PM > To: Dewey, Michael; freebsd-questions@FreeBSD.ORG > Subject: Re: Terminal mode in ppp > > Are you sure that you're using the correct COM port? Check > /etc/ppp/ppp.conf and make sure that you have the correct device listed > for > your modem... > > > > 9:23am@parrothd/etc>cd ppp > 9:23am@parrothd/etc/ppp>more ppp.conf > ################################################################# > # > # PPP Sample Configuration File > # > # Written by Toshiharu OHNO > # > # $Id: ppp.conf.sample,v 1.5.2.12 1997/09/10 01:00:27 brian Exp $ > # > ################################################################# > > # Default setup. Always executed when PPP is invoked. > # > default: > set device /dev/cuaa0 <<<----------------This means COM1, cuaa1 = COM2 > set speed 57600 > # set log Phase +Chat Connect Carrier hdlc LCP IPCP CCP tun > deny lqr > set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \"\" AT OK-AT-OK > \\dATm1DT\\T TIMEOUT 100 CONNECT" > > > At 01:06 PM 11/18/99 -0700, Dewey, Michael wrote: > >I am still trying to get my modem to work, but when I enter terminal mode > in > >ppp, none of my keystrokes (or any of the replies from the modem) are > echoed > >to the terminal. Does anybody know what could be causing this? Please > let > >my know what information about my system configuration would be helpful. > > > >Thanks, > >Mike > > > > > > > >To Unsubscribe: send mail to majordomo@FreeBSD.org > >with "unsubscribe freebsd-questions" in the body of the message > > > > > > Jonathan E. Lyons > parrothd@midwest.net Nucleus Consulting > ICQ # 14226912 www.nucleusconsulting.com > Cell # 773-251-1967 A+, MCSE, CCNA, FreeBSD! > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?690C7049A180D11194BD00805F6F2CE003BEB15E>