Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 31 Jul 2014 23:09:22 +0000 (UTC)
From:      Navdeep Parhar <np@FreeBSD.org>
To:        src-committers@freebsd.org, svn-src-all@freebsd.org, svn-src-stable@freebsd.org, svn-src-stable-10@freebsd.org
Subject:   svn commit: r269357 - stable/10/tools/tools/cxgbetool
Message-ID:  <201407312309.s6VN9M4v067585@svn.freebsd.org>

next in thread | raw e-mail | index | archive | help
Author: np
Date: Thu Jul 31 23:09:22 2014
New Revision: 269357
URL: http://svnweb.freebsd.org/changeset/base/269357

Log:
  MFC r269106:
  
  Add a 'raw' parameter to the 'modinfo' subcommand.  This is handy when
  trying to figure out why a QSFP+/SFP+ connector or cable wasn't
  identified correctly by cxgbe(4).  Its output looks like this:
  
  # cxgbetool t5nex0 modinfo 0 raw
  00:  03 04 21 00  00 00 00 00  ..!. ....
  08:  04 00 00 00  67 00 00 00  .... g...
  10:  00 00 05 00  41 6d 70 68  .... Amph
  18:  65 6e 6f 6c  20 20 20 20  enol
  20:  20 20 20 20  00 41 50 48       .APH
  28:  35 37 31 35  34 30 30 30  5715 4000
  30:  33 20 20 20  20 20 20 20  3
  38:  4b 20 20 20  01 00 00 fa  K    ....
  40:  00 00 00 00  41 50 46 31  .... APF1
  48:  30 30 34 30  30 33 30 30  0040 0300
  50:  30 33 20 20  31 30 30 31  03   1001
  58:  33 30 20 20  00 00 00 97  30   ....

Modified:
  stable/10/tools/tools/cxgbetool/cxgbetool.c
Directory Properties:
  stable/10/   (props changed)

Modified: stable/10/tools/tools/cxgbetool/cxgbetool.c
==============================================================================
--- stable/10/tools/tools/cxgbetool/cxgbetool.c	Thu Jul 31 23:04:41 2014	(r269356)
+++ stable/10/tools/tools/cxgbetool/cxgbetool.c	Thu Jul 31 23:09:22 2014	(r269357)
@@ -95,7 +95,7 @@ usage(FILE *fp)
 	    "\ti2c <port> <devaddr> <addr> [<len>] read from i2c device\n"
 	    "\tloadfw <fw-image.bin>               install firmware\n"
 	    "\tmemdump <addr> <len>                dump a memory range\n"
-	    "\tmodinfo <port>                      optics/cable information\n"
+	    "\tmodinfo <port> [raw]                optics/cable information\n"
 	    "\treg <address>[=<val>]               read/write register\n"
 	    "\treg64 <address>[=<val>]             read/write 64 bit register\n"
 	    "\tregdump [<module>] ...              dump registers\n"
@@ -1873,6 +1873,41 @@ tracer_cmd(int argc, const char *argv[])
 }
 
 static int
+modinfo_raw(int port_id)
+{
+	uint8_t offset;
+	struct t4_i2c_data i2cd;
+	int rc;
+
+	for (offset = 0; offset < 96; offset += sizeof(i2cd.data)) {
+		bzero(&i2cd, sizeof(i2cd));
+		i2cd.port_id = port_id;
+		i2cd.dev_addr = 0xa0;
+		i2cd.offset = offset;
+		i2cd.len = sizeof(i2cd.data);
+		rc = doit(CHELSIO_T4_GET_I2C, &i2cd);
+		if (rc != 0)
+			return (rc);
+		printf("%02x:  %02x %02x %02x %02x  %02x %02x %02x %02x",
+		    offset, i2cd.data[0], i2cd.data[1], i2cd.data[2],
+		    i2cd.data[3], i2cd.data[4], i2cd.data[5], i2cd.data[6],
+		    i2cd.data[7]);
+
+		printf("  %c%c%c%c %c%c%c%c\n",
+		    isprint(i2cd.data[0]) ? i2cd.data[0] : '.',
+		    isprint(i2cd.data[1]) ? i2cd.data[1] : '.',
+		    isprint(i2cd.data[2]) ? i2cd.data[2] : '.',
+		    isprint(i2cd.data[3]) ? i2cd.data[3] : '.',
+		    isprint(i2cd.data[4]) ? i2cd.data[4] : '.',
+		    isprint(i2cd.data[5]) ? i2cd.data[5] : '.',
+		    isprint(i2cd.data[6]) ? i2cd.data[6] : '.',
+		    isprint(i2cd.data[7]) ? i2cd.data[7] : '.');
+	}
+
+	return (0);
+}
+
+static int
 modinfo(int argc, const char *argv[])
 {
 	long port;
@@ -1881,17 +1916,31 @@ modinfo(int argc, const char *argv[])
 	int rc, i;
 	uint16_t temp, vcc, tx_bias, tx_power, rx_power;
 
-	if (argc != 1) {
+	if (argc < 1) {
 		warnx("must supply a port");
 		return (EINVAL);
 	}
 
+	if (argc > 2) {
+		warnx("too many arguments");
+		return (EINVAL);
+	}
+
 	p = str_to_number(argv[0], &port, NULL);
 	if (*p || port > UCHAR_MAX) {
 		warnx("invalid port id \"%s\"", argv[0]);
 		return (EINVAL);
 	}
 
+	if (argc == 2) {
+		if (!strcmp(argv[1], "raw"))
+			return (modinfo_raw(port));
+		else {
+			warnx("second argument can only be \"raw\"");
+			return (EINVAL);
+		}
+	}
+
 	bzero(&i2cd, sizeof(i2cd));
 	i2cd.len = 1;
 	i2cd.port_id = port;



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201407312309.s6VN9M4v067585>