Date: Wed, 8 Mar 2006 16:09:13 -0500 From: "Joseph Turian" <turian@gmail.com> To: questions@freebsd.org Subject: Re: 6.1-BETA2 AMD64 boot only CD freezes at "module_register_init: MOD_LOAD (amr_linux, 0xffffffff805ebcc0, 0) error 6 Message-ID: <4dacb2560603081309g7315c845q72efc53e8843fff0@mail.gmail.com> In-Reply-To: <4dacb2560603031340q322b7152od90f4e869283079a@mail.gmail.com> References: <4dacb2560603031327l6a8befc3ie36afd89d54e9a72@mail.gmail.com> <4dacb2560603031340q322b7152od90f4e869283079a@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Strange. I tried booting the 6.1-BETA2 i386 bootonly CD, and it worked just fine. I still have no idea why the 6.1-BETA2 AMD64 bootonly CD freezes. The sanity check of booting a Linux AMD64 liveCD works just fine. Any ideas why I can't boot ther AMD64 bootonly CD? What is the disadvantage of doing an i386 install on an AMD64 machine? Will it run slower? Joseph On 3/3/06, Joseph Turian <turian@gmail.com> wrote: > I flubbed that error message slightly, since I have to copy it by hand. := P > Sorry about that, here's the correct version: > > > Here is the 6.1-BETA2 AMD64 boot freeze message: > > Timecounter "TSC" frequency 2009156527 Hz quality 800 > Timecounters tick every 1.000 msec > module_register_init: MOD_LOAD (amr_linux, 0xffffffff805ebcc0, 0) error 6 > > > > Here is the 6.0 AMD64 boot freeze message: > > Timecounter "TSC" frequency 2009156417 Hz quality 800 > Timecounters tick every 1.000 msec > > Joseph > > > > > > This is slightly modified version of the error I get if I try to 6.0 bo= ot disc. > > > > Here is some prior evidence I collected in an earlier version of this > > question on list.freebsd.questions. No one seems to know the answer, > > so I'm following up here with more information, in the hopes someone > > can help me out. (Sorry if anyone minds.) I need to install this > > system RSN and I'd prefer to use FreeBSD but the Linux install works > > fine in a pinch and FreeBSD won't even boot. Please help! > > > > Thanks, > > > > Joseph > > > > =3D=3D=3D=3D=3D > > > > From: "Joseph Turian" <tur...@gmail.com> > > Newsgroups: list.freebsd.questions > > Subject: 6.0 install CD boot freezes at "Timecounters tick every 1.000 = msec" > > Date: 2 Mar 2006 14:08:30 -0800 > > > > I'm having difficulty booting FreeBSD from the 6.0 install disc 1 for > > AMD64. > > I've also tried the boot disk, with the same problem. > > > > Basically, I'm trying to install on a clean system. Boot with ACPI > > *disabled* freezes with: > > > > Timecounter "TSC" frequency 2009156417 Hz quality 800 > > Timecounters tick every 1.000 msec > > > > > > I've googled this message and the recommendation is "boot with ACPI". > > But I disabled ACPI in the BIOS *and* I boot with option 2 (no ACPI), > > so that doesn't resolve the issue. > > > > Please help! I'd really like to install FreeBSD and give it a spin. I'd > > hate to be forced to install Linux just because it works no problem. > > > > Thanks, > > Joseph > > > > P.S. If you're interested in my hardware, here's the dmesg output from > > the gentoo livecd i686 2006.0 installer cd. I have a SATA disk and an > > IDE disk, maybe that's the issue? > > > > Linux version 2.6.15-gentoo-r5 (root@gravity) (gcc version 3.4.4 > > (Gentoo 3.4.4-r1, ssp-3.4.4-1.0, pie-8.7.8)) #1 SMP Mon Feb 13 20:23:47 > > UTC 2006 > > BIOS-provided physical RAM map: > > BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) > > BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) > > BIOS-e820: 00000000000e5000 - 0000000000100000 (reserved) > > BIOS-e820: 0000000000100000 - 000000007bfc0000 (usable) > > BIOS-e820: 000000007bfc0000 - 000000007bfce000 (ACPI data) > > BIOS-e820: 000000007bfce000 - 000000007bff0000 (ACPI NVS) > > BIOS-e820: 000000007bff0000 - 000000007c000000 (reserved) > > BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) > > BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) > > BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved) > > 1087MB HIGHMEM available. > > 896MB LOWMEM available. > > found SMP MP-table at 000ff780 > > On node 0 totalpages: 507840 > > DMA zone: 4096 pages, LIFO batch:0 > > DMA32 zone: 0 pages, LIFO batch:0 > > Normal zone: 225280 pages, LIFO batch:31 > > HighMem zone: 278464 pages, LIFO batch:31 > > DMI 2.3 present. > > ACPI: RSDP (v000 ACPIAM ) @ 0x000fb870 > > ACPI: RSDT (v001 A M I OEMRSDT 0x10000505 MSFT 0x00000097) @ > > 0x7bfc0000 > > ACPI: FADT (v002 A M I OEMFACP 0x10000505 MSFT 0x00000097) @ > > 0x7bfc0200 > > ACPI: MCFG (v001 A M I OEMMCFG 0x10000505 MSFT 0x00000097) @ > > 0x7bfc0400 > > ACPI: OEMB (v001 A M I AMI_OEM 0x10000505 MSFT 0x00000097) @ > > 0x7bfce040 > > ACPI: DSDT (v001 A0368 A0368001 0x00000001 INTL 0x02002026) @ > > 0x00000000 > > Intel MultiProcessor Specification v1.4 > > Virtual Wire compatibility mode. > > OEM ID: TEMPLATE Product ID: CSM APIC at: 0xFEE00000 > > Processor #0 15:15 APIC version 16 > > I/O APIC #1 Version 17 at 0xFEC00000. > > Enabling APIC mode: Flat. Using 1 I/O APICs > > Processors: 1 > > Allocating PCI resources starting at 80000000 (gap: 7c000000:82c00000) > > Built 1 zonelists > > Kernel command line: root=3D/dev/ram0 init=3D/linuxrc dokeymap > > looptype=3Dsquashfs loop=3D/image.squashfs cdroot initrd=3Dgentoo.igz v= ga=3D791 > > splash=3Dsilent,theme:livecd-2006.0 CONSOLE=3D/dev/tty1 quiet > > BOOT_IMAGE=3Dgentoo > > mapped APIC to ffffd000 (fee00000) > > mapped IOAPIC to ffffc000 (fec00000) > > Initializing CPU#0 > > CPU 0 irqstacks, hard=3Dc0427000 soft=3Dc041f000 > > PID hash table entries: 4096 (order: 12, 65536 bytes) > > Detected 2009.214 MHz processor. > > Using tsc for high-res timesource > > Speakup v-2.00 CVS: Wed Dec 21 14:36:03 EST 2005 : initialized > > Console: colour dummy device 80x25 > > Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) > > Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) > > Memory: 2005764k/2031360k available (2388k kernel code, 24456k > > reserved, 561k data, 220k init, 1113856k highmem) > > Checking if this processor honours the WP bit even in supervisor > > mode... Ok. > > Calibrating delay using timer specific routine.. 4023.16 BogoMIPS > > (lpj=3D20115849) > > Mount-cache hash table entries: 512 > > CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000 > > 00000001 00000000 00000001 > > CPU: After vendor identify, caps: 078bfbff e3d3fbff 00000000 00000000 > > 00000001 00000000 00000001 > > CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) > > CPU: L2 Cache: 512K (64 bytes/line) > > CPU: After all inits, caps: 078bfbff e3d3fbff 00000000 00000010 > > 00000001 00000000 00000001 > > mtrr: v2.0 (20020519) > > Enabling fast FPU save and restore... done. > > Enabling unmasked SIMD FPU exception support... done. > > Checking 'hlt' instruction... OK. > > ACPI-0311: *** Error: ns_search_and_enter: Bad character in ACPI > > Name: 43035350 > > ACPI-0292: *** Error: Looking up [0x43035350] (NON-ASCII) > > in namespace, AE_BAD_CHARACTER > > ACPI-0115: *** Error: acpi_load_tables: Could not load namespace: > > AE_BAD_CHARACTER > > ACPI-0123: *** Error: acpi_load_tables: Could not load tables: > > AE_BAD_CHARACTER > > ACPI: Unable to load the System Description Tables > > CPU0: AMD Athlon(tm) 64 Processor 3200+ stepping 02 > > Total of 1 processors activated (4023.16 BogoMIPS). > > ExtINT not setup in hardware but reported by MP table > > ENABLING IO-APIC IRQs > > ..TIMER: vector=3D0x31 apic1=3D0 pin1=3D2 apic2=3D0 pin2=3D0 > > ..MP-BIOS bug: 8254 timer not connected to IO-APIC > > ...trying to set up timer (IRQ0) through the 8259A ... > > ..... (found pin 0) ...works. > > Brought up 1 CPUs > > checking if image is initramfs... it is > > Freeing initrd memory: 3941k freed > > NET: Registered protocol family 16 > > EISA bus registered > > PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=3D4 > > PCI: Using MMCONFIG > > ACPI: Subsystem revision 20050902 > > ACPI: Interpreter disabled. > > Linux Plug and Play Support v0.97 (c) Adam Belay > > pnp: PnP ACPI: disabled > > SCSI subsystem initialized > > PCI: Probing PCI hardware > > PCI: Probing PCI hardware (bus 00) > > Boot video device is 0000:00:05.0 > > PCI: Transparent bridge - 0000:00:10.0 > > PCI: Using IRQ router default [10de/0260] at 0000:00:0a.0 > > PCI->APIC IRQ transform: 0000:00:05.0[A] -> IRQ 11 > > PCI->APIC IRQ transform: 0000:00:0a.1[A] -> IRQ 5 > > PCI->APIC IRQ transform: 0000:00:0b.0[A] -> IRQ 5 > > PCI->APIC IRQ transform: 0000:00:0b.1[B] -> IRQ 3 > > PCI->APIC IRQ transform: 0000:00:0e.0[A] -> IRQ 5 > > PCI->APIC IRQ transform: 0000:00:0f.0[A] -> IRQ 5 > > PCI->APIC IRQ transform: 0000:00:10.1[B] -> IRQ 5 > > PCI->APIC IRQ transform: 0000:00:14.0[A] -> IRQ 5 > > PCI->APIC IRQ transform: 0000:04:05.0[A] -> IRQ 5 > > PCI: Bridge: 0000:00:02.0 > > IO window: disabled. > > MEM window: disabled. > > PREFETCH window: disabled. > > PCI: Bridge: 0000:00:03.0 > > IO window: disabled. > > MEM window: disabled. > > PREFETCH window: disabled. > > PCI: Bridge: 0000:00:04.0 > > IO window: disabled. > > MEM window: disabled. > > PREFETCH window: disabled. > > PCI: Bridge: 0000:00:10.0 > > IO window: c000-cfff > > MEM window: faa00000-faafffff > > PREFETCH window: disabled. > > PCI: Setting latency timer of device 0000:00:02.0 to 64 > > PCI: Setting latency timer of device 0000:00:03.0 to 64 > > PCI: Setting latency timer of device 0000:00:04.0 to 64 > > PCI: Setting latency timer of device 0000:00:10.0 to 64 > > audit: initializing netlink socket (disabled) > > audit(1141365136.290:1): initialized > > highmem bounce pool size: 64 pages > > Squashfs 2.2 (released 2005/07/03) (C) 2002-2005 Phillip Lougher > > SGI XFS with ACLs, security attributes, realtime, large block numbers, > > no debug enabled > > SGI XFS Quota Management subsystem > > Initializing Cryptographic API > > io scheduler noop registered > > io scheduler anticipatory registered > > io scheduler deadline registered > > io scheduler cfq registered > > PCI: Setting latency timer of device 0000:00:02.0 to 64 > > pcie_portdrv_probe->Dev[02fc:10de] has invalid IRQ. Check vendor BIOS > > assign_interrupt_mode Found MSI capability > > Allocate Port Service[pcie00] > > Allocate Port Service[pcie03] > > PCI: Setting latency timer of device 0000:00:03.0 to 64 > > pcie_portdrv_probe->Dev[02fd:10de] has invalid IRQ. Check vendor BIOS > > assign_interrupt_mode Found MSI capability > > Allocate Port Service[pcie00] > > Allocate Port Service[pcie03] > > PCI: Setting latency timer of device 0000:00:04.0 to 64 > > pcie_portdrv_probe->Dev[02fb:10de] has invalid IRQ. Check vendor BIOS > > assign_interrupt_mode Found MSI capability > > Allocate Port Service[pcie00] > > Allocate Port Service[pcie03] > > initialized device: /dev/synth, node ( MAJOR 10, MINOR 25 ) > > vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 3072k, > > total 65536k > > vesafb: mode is 1024x768x16, linelength=3D2048, pages=3D1 > > vesafb: protected mode interface info at c000:d0c0 > > vesafb: scrolling: redraw > > vesafb: Truecolor: size=3D0:5:6:5, shift=3D0:11:5:0 > > vesafb: Mode is VGA compatible > > Console: switching to colour frame buffer device 128x48 > > fb0: VESA VGA frame buffer device > > isapnp: Scanning for PnP cards... > > isapnp: No Plug & Play device found > > PNP: No PS/2 controller found. Probing ports directly. > > serio: i8042 AUX port at 0x60,0x64 irq 12 > > serio: i8042 KBD port at 0x60,0x64 irq 1 > > Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing > > enabled > > serial8250: ttyS0 at I/O 0x3f8 (irq =3D 4) is a 16550A > > mice: PS/2 mouse device common for all mice > > RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize > > loop: loaded (max 8 devices) > > Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 > > ide: Assuming 33MHz system bus speed for PIO modes; override with > > idebus=3Dxx > > NFORCE-MCP51: IDE controller at PCI slot 0000:00:0d.0 > > NFORCE-MCP51: chipset revision 161 > > NFORCE-MCP51: not 100% native mode: will probe irqs later > > NFORCE-MCP51: 0000:00:0d.0 (rev a1) UDMA133 controller > > ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio > > ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio > > Probing IDE interface ide0... > > input: AT Translated Set 2 keyboard as /class/input/input0 > > hda: WDC WD1600JB-00GVA0, ATA DISK drive > > input: ImPS/2 Logitech Wheel Mouse as /class/input/input1 > > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > > Probing IDE interface ide1... > > hdc: ASUS DRW-1608P2S, ATAPI CD/DVD-ROM drive > > ide1 at 0x170-0x177,0x376 on irq 15 > > hda: max request size: 1024KiB > > hda: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=3D19457/255/63, > > UDMA(100) > > hda: cache flushes supported > > hda: hda1 > > hdc: ATAPI 40X DVD-ROM DVD-R-RAM CD-R/RW drive, 2000kB Cache, UDMA(66) > > Uniform CD-ROM driver Revision: 3.20 > > md: md driver 0.90.3 MAX_MD_DEVS=3D256, MD_SB_DISKS=3D27 > > md: bitmap version 4.39 > > EISA: Probing bus 0 at eisa.0 > > EISA: Detected 0 cards. > > NET: Registered protocol family 2 > > IP route cache hash table entries: 65536 (order: 6, 262144 bytes) > > TCP established hash table entries: 262144 (order: 9, 2097152 bytes) > > TCP bind hash table entries: 65536 (order: 7, 524288 bytes) > > TCP: Hash tables configured (established 262144 bind 65536) > > TCP reno registered > > TCP bic registered > > NET: Registered protocol family 1 > > NET: Registered protocol family 17 > > Using IPI Shortcut mode > > Freeing unused kernel memory: 220k freed > > usbcore: registered new driver usbfs > > usbcore: registered new driver hub > > PCI: Setting latency timer of device 0000:00:0b.1 to 64 > > ehci_hcd 0000:00:0b.1: EHCI Host Controller > > ehci_hcd 0000:00:0b.1: debug port 1 > > PCI: cache line size of 64 is not supported by device 0000:00:0b.1 > > ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1 > > ehci_hcd 0000:00:0b.1: irq 3, io mem 0xfebdfc00 > > ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 > > hub 1-0:1.0: USB hub found > > hub 1-0:1.0: 8 ports detected > > usbcore: registered new driver hiddev > > usbcore: registered new driver usbhid > > drivers/usb/input/hid-core.c: v2.6:USB HID core driver > > Initializing USB Mass Storage driver... > > usbcore: registered new driver usb-storage > > USB Mass Storage support registered. > > irq 3: nobody cared (try booting with the "irqpoll" option) > > [<c0133a79>] > > [<c0133b40>] > > [<c0133561>] > > [<c01046b3>] > > =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > > [<c0103132>] > > handlers: > > [<f8850e4a>] > > Disabling IRQ #3 > > USB Universal Host Controller Interface driver v2.3 > > ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver > > (PCI) > > PCI: Setting latency timer of device 0000:00:0b.0 to 64 > > ohci_hcd 0000:00:0b.0: OHCI Host Controller > > ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2 > > ohci_hcd 0000:00:0b.0: irq 5, io mem 0xfebde000 > > hub 2-0:1.0: USB hub found > > hub 2-0:1.0: 8 ports detected > > sl811: driver sl811-hcd, 19 May 2005 > > ieee1394: Initialized config rom entry `ip1394' > > ohci1394: $Rev: 1313 $ Ben Collins <bcoll...@debian.org> > > ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=3D[5] > > MMIO=3D[faaff800-faafffff] Max Packet=3D[2048] > > sbp2: $Rev: 1306 $ Ben Collins <bcoll...@debian.org> > > ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=3D1) > > ieee1394: sbp2: Try serialize_io=3D0 for better performance > > libata version 1.20 loaded. > > sata_nv 0000:00:0e.0: version 0.8 > > PCI: Setting latency timer of device 0000:00:0e.0 to 64 > > ata1: SATA max UDMA/133 cmd 0xE800 ctl 0xE482 bmdma 0xE000 irq 5 > > ata2: SATA max UDMA/133 cmd 0xE400 ctl 0xE082 bmdma 0xE008 irq 5 > > ata1: dev 0 cfg 49:2f00 82:746b 83:7f61 84:4023 85:7469 86:3c41 87:4023 > > 88:407f > > ata1: dev 0 ATA-7, max UDMA/133, 625142448 sectors: LBA48 > > ata1: dev 0 configured for UDMA/133 > > scsi0 : sata_nv > > ata2: no device found (phy stat 00000000) > > scsi1 : sata_nv > > Vendor: ATA Model: WDC WD3200KS-00P Rev: 21.0 > > Type: Direct-Access ANSI SCSI revision: 05 > > SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB) > > SCSI device sda: drive cache: write back > > SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB) > > SCSI device sda: drive cache: write back > > sda: unknown partition table > > sd 0:0:0:0: Attached scsi disk sda > > PCI: Setting latency timer of device 0000:00:0f.0 to 64 > > ata3: SATA max UDMA/133 cmd 0xDC00 ctl 0xD882 bmdma 0xD400 irq 5 > > ata4: SATA max UDMA/133 cmd 0xD800 ctl 0xD482 bmdma 0xD408 irq 5 > > ata3: no device found (phy stat 00000000) > > scsi2 : sata_nv > > ata4: no device found (phy stat 00000000) > > scsi3 : sata_nv > > ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d8000067efab] > > device-mapper: 4.4.0-ioctl (2005-01-12) initialised: > > dm-de...@redhat.com > > ReiserFS: sda: warning: sh-2021: reiserfs_fill_super: can not find > > reiserfs on sda > > VFS: Can't find ext3 filesystem on dev sda. > > VFS: Can't find an ext2 filesystem on dev sda. > > SQUASHFS error: Can't find a SQUASHFS superblock on sda > > FAT: bogus number of reserved sectors > > VFS: Can't find a valid FAT filesystem on dev sda. > > Unable to identify CD-ROM format. > > UDF-fs: No partition found (1) > > XFS: bad magic number > > XFS: SB validate failed > > ReiserFS: hda: warning: sh-2021: reiserfs_fill_super: can not find > > reiserfs on hda > > VFS: Can't find ext3 filesystem on dev hda. > > VFS: Can't find an ext2 filesystem on dev hda. > > SQUASHFS error: Can't find a SQUASHFS superblock on hda > > FAT: invalid media value (0x01) > > VFS: Can't find a valid FAT filesystem on dev hda. > > Unable to identify CD-ROM format. > > UDF-fs: No partition found (1) > > XFS: bad magic number > > XFS: SB validate failed > > ReiserFS: hda1: warning: sh-2021: reiserfs_fill_super: can not find > > reiserfs on hda1 > > VFS: Can't find ext3 filesystem on dev hda1. > > VFS: Can't find an ext2 filesystem on dev hda1. > > SQUASHFS error: Can't find a SQUASHFS superblock on hda1 > > FAT: bogus number of reserved sectors > > VFS: Can't find a valid FAT filesystem on dev hda1. > > Unable to identify CD-ROM format. > > UDF-fs: No partition found (1) > > XFS: bad magic number > > XFS: SB validate failed > > ReiserFS: hdc: warning: sh-2021: reiserfs_fill_super: can not find > > reiserfs on hdc > > VFS: Can't find ext3 filesystem on dev hdc. > > VFS: Can't find an ext2 filesystem on dev hdc. > > SQUASHFS error: Can't find a SQUASHFS superblock on hdc > > FAT: bogus number of reserved sectors > > VFS: Can't find a valid FAT filesystem on dev hdc. > > ISO 9660 Extensions: Microsoft Joliet Level 3 > > hdc: cdrom_decode_status: status=3D0x51 { DriveReady SeekComplete Error= } > > hdc: cdrom_decode_status: error=3D0x40 { LastFailedSense=3D0x04 } > > ide: failed opcode was: unknown > > hdc: cdrom_decode_status: status=3D0x51 { DriveReady SeekComplete Error= } > > hdc: cdrom_decode_status: error=3D0x40 { LastFailedSense=3D0x04 } > > ide: failed opcode was: unknown > > hdc: cdrom_decode_status: status=3D0x51 { DriveReady SeekComplete Error= } > > hdc: cdrom_decode_status: error=3D0x40 { LastFailedSense=3D0x04 } > > ide: failed opcode was: unknown > > hdc: cdrom_decode_status: status=3D0x51 { DriveReady SeekComplete Error= } > > hdc: cdrom_decode_status: error=3D0x40 { LastFailedSense=3D0x04 } > > ide: failed opcode was: unknown > > hdc: DMA disabled > > hdc: ide_intr: huh? expected NULL handler on exit > > hdc: ATAPI reset complete > > ISO 9660 Extensions: RRIP_1991A > > VFS: busy inodes on changed media. > > eth1394: $Rev: 1312 $ Ben Collins <bcoll...@debian.org> > > eth1394: eth0: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0) > > parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP] > > parport0: irq 7 detected > > forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.48. > > PCI: Setting latency timer of device 0000:00:14.0 to 64 > > eth1: forcedeth.c: subsystem: 010de:cb84 bound to 0000:00:14.0 > > eth1: no link during initialization. > > eth1: no link during initialization. > > hdc: cdrom_decode_status: status=3D0x51 { DriveReady SeekComplete Error= } > > hdc: cdrom_decode_status: error=3D0x40 { LastFailedSense=3D0x04 } > > ide: failed opcode was: unknown > > hdc: cdrom_decode_status: status=3D0x51 { DriveReady SeekComplete Error= } > > hdc: cdrom_decode_status: error=3D0x40 { LastFailedSense=3D0x04 } > > ide: failed opcode was: unknown > > hdc: cdrom_decode_status: status=3D0x51 { DriveReady SeekComplete Error= } > > hdc: cdrom_decode_status: error=3D0x40 { LastFailedSense=3D0x04 } > > ide: failed opcode was: unknown > > hdc: cdrom_decode_status: status=3D0x51 { DriveReady SeekComplete Error= } > > hdc: cdrom_decode_status: error=3D0x40 { LastFailedSense=3D0x04 } > > ide: failed opcode was: unknown > > hdc: DMA disabled > > hdc: ide_intr: huh? expected NULL handler on exit > > hdc: ATAPI reset complete > > eth1: link up. > > VFS: busy inodes on changed media. > > fbsplash: console 0 using theme 'default' > > fbsplash: switched splash state to 'on' on console 0 > > NET: Registered protocol family 10 > > lo: Disabled Privacy Extensions > > IPv6 over IPv4 tunneling driver > > eth1: no IPv6 routers present > > > > > -- > http://www.cs.nyu.edu/~turian/ > -- http://www.cs.nyu.edu/~turian/
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4dacb2560603081309g7315c845q72efc53e8843fff0>