Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 9 Jul 2017 17:02:47 +0000 (UTC)
From:      Warner Losh <imp@FreeBSD.org>
To:        src-committers@freebsd.org, svn-src-all@freebsd.org, svn-src-head@freebsd.org
Subject:   svn commit: r320845 - in head/sys: dev/mmcnull modules/mmcnull
Message-ID:  <201707091702.v69H2lOf000852@repo.freebsd.org>

next in thread | raw e-mail | index | archive | help
Author: imp
Date: Sun Jul  9 17:02:47 2017
New Revision: 320845
URL: https://svnweb.freebsd.org/changeset/base/320845

Log:
  Added mmcnull, an emulated lightweight MMC controller
  
  This emulated device attaches to the ISA bus and registers itself as
  HBA supporting MMC/SD cards. This allows to develop and test MMC XPT
  and MMC / SDIO peripheral drivers even in the VM such as bhyve.
  
  Submitted by: Ilya Babulin

Added:
  head/sys/dev/mmcnull/
  head/sys/dev/mmcnull/mmcnull.c   (contents, props changed)
  head/sys/modules/mmcnull/
  head/sys/modules/mmcnull/Makefile   (contents, props changed)

Added: head/sys/dev/mmcnull/mmcnull.c
==============================================================================
--- /dev/null	00:00:00 1970	(empty, because file is newly added)
+++ head/sys/dev/mmcnull/mmcnull.c	Sun Jul  9 17:02:47 2017	(r320845)
@@ -0,0 +1,463 @@
+/*-
+ * Copyright (c) 2013 Ilya Bakulin.  All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#include <sys/cdefs.h>
+__FBSDID("$FreeBSD$");
+
+#include <sys/param.h>
+#include <sys/module.h>
+#include <sys/kernel.h>
+#include <sys/malloc.h>
+#include <sys/systm.h>
+#include <sys/lock.h>
+#include <sys/mutex.h>
+#include <sys/bus.h>
+#include <sys/endian.h>
+#include <sys/sysctl.h>
+
+#include <cam/cam.h>
+#include <cam/cam_ccb.h>
+#include <cam/cam_debug.h>
+#include <cam/cam_sim.h>
+#include <cam/cam_xpt_sim.h>
+#include <cam/scsi/scsi_all.h>
+
+static int is_sdio_mode = 1;
+
+struct mmcnull_softc {
+	device_t dev;
+	struct mtx sc_mtx;
+
+	struct cam_devq		*devq;
+	struct cam_sim		*sim;
+	struct cam_path		*path;
+
+	struct callout		 tick;
+	union ccb		*cur_ccb;
+};
+
+static void mmcnull_identify(driver_t *, device_t);
+static int  mmcnull_probe(device_t);
+static int  mmcnull_attach(device_t);
+static int  mmcnull_detach(device_t);
+static void mmcnull_action_sd(struct cam_sim *, union ccb *);
+static void mmcnull_action_sdio(struct cam_sim *, union ccb *);
+static void mmcnull_intr_sd(void *xsc);
+static void mmcnull_intr_sdio(void *xsc);
+static void mmcnull_poll(struct cam_sim *);
+
+static void
+mmcnull_identify(driver_t *driver, device_t parent)
+{
+	device_t child;
+
+	if (resource_disabled("mmcnull", 0))
+		return;
+
+	if (device_get_unit(parent) != 0)
+		return;
+
+	/* Avoid duplicates. */
+	if (device_find_child(parent, "mmcnull", -1))
+		return;
+
+	child = BUS_ADD_CHILD(parent, 20, "mmcnull", 0);
+	if (child == NULL) {
+		device_printf(parent, "add MMCNULL child failed\n");
+		return;
+	}
+}
+
+
+static int
+mmcnull_probe(device_t dev)
+{
+	device_set_desc(dev, "Emulated MMC controller");
+	return (BUS_PROBE_DEFAULT);
+}
+
+static int
+mmcnull_attach(device_t dev)
+{
+	struct mmcnull_softc *sc;
+	sim_action_func action_func;
+
+	sc = device_get_softc(dev);
+	sc->dev = dev;
+
+	mtx_init(&sc->sc_mtx, "mmcnullmtx", NULL, MTX_DEF);
+
+	if ((sc->devq = cam_simq_alloc(1)) == NULL)
+		return (ENOMEM);
+
+	if (is_sdio_mode)
+		action_func = mmcnull_action_sdio;
+	else
+		action_func = mmcnull_action_sd;
+	sc->sim = cam_sim_alloc(action_func, mmcnull_poll, "mmcnull", sc,
+				device_get_unit(dev), &sc->sc_mtx, 1, 1,
+				sc->devq);
+
+	if (sc->sim == NULL) {
+		cam_simq_free(sc->devq);
+		device_printf(dev, "cannot allocate CAM SIM\n");
+		return (EINVAL);
+	}
+
+	mtx_lock(&sc->sc_mtx);
+	if (xpt_bus_register(sc->sim, dev, 0) != 0) {
+		device_printf(dev,
+			      "cannot register SCSI pass-through bus\n");
+		cam_sim_free(sc->sim, FALSE);
+		cam_simq_free(sc->devq);
+		mtx_unlock(&sc->sc_mtx);
+		return (EINVAL);
+	}
+	mtx_unlock(&sc->sc_mtx);
+
+	callout_init_mtx(&sc->tick, &sc->sc_mtx, 0);	/* Callout to emulate interrupts */
+
+	device_printf(dev, "attached OK\n");
+
+	return (0);
+}
+
+static int
+mmcnull_detach(device_t dev)
+{
+	struct mmcnull_softc *sc;
+
+	sc = device_get_softc(dev);
+
+	if (sc == NULL)
+		return (EINVAL);
+
+	if (sc->sim != NULL) {
+		mtx_lock(&sc->sc_mtx);
+		xpt_bus_deregister(cam_sim_path(sc->sim));
+		cam_sim_free(sc->sim, FALSE);
+		mtx_unlock(&sc->sc_mtx);
+	}
+
+	if (sc->devq != NULL)
+		cam_simq_free(sc->devq);
+
+	callout_drain(&sc->tick);
+	mtx_destroy(&sc->sc_mtx);
+
+	device_printf(dev, "detached OK\n");
+	return (0);
+}
+
+/*
+ * The interrupt handler
+ * This implementation calls it via callout(9)
+ * with the mutex already taken
+ */
+static void
+mmcnull_intr_sd(void *xsc) {
+	struct mmcnull_softc *sc;
+	union ccb *ccb;
+	struct ccb_mmcio *mmcio;
+
+	sc = (struct mmcnull_softc *) xsc;
+	mtx_assert(&sc->sc_mtx, MA_OWNED);
+
+	ccb = sc->cur_ccb;
+	mmcio = &ccb->mmcio;
+	device_printf(sc->dev, "mmcnull_intr: MMC command = %d\n",
+		      mmcio->cmd.opcode);
+
+	switch (mmcio->cmd.opcode) {
+	case MMC_GO_IDLE_STATE:
+		device_printf(sc->dev, "Reset device\n");
+		break;
+	case SD_SEND_IF_COND:
+		mmcio->cmd.resp[0] = 0x1AA; // To match mmc_xpt expectations :-)
+		break;
+	case MMC_APP_CMD:
+		mmcio->cmd.resp[0] = R1_APP_CMD;
+		break;
+	case SD_SEND_RELATIVE_ADDR:
+	case MMC_SELECT_CARD:
+		mmcio->cmd.resp[0] = 0x1 << 16;
+		break;
+	case ACMD_SD_SEND_OP_COND:
+		mmcio->cmd.resp[0] = 0xc0ff8000;
+		mmcio->cmd.resp[0] |= MMC_OCR_CARD_BUSY;
+		break;
+	case MMC_ALL_SEND_CID:
+		/* Note: this is a real CID from Wandboard int mmc */
+		mmcio->cmd.resp[0] = 0x1b534d30;
+		mmcio->cmd.resp[1] = 0x30303030;
+		mmcio->cmd.resp[2] = 0x10842806;
+		mmcio->cmd.resp[3] = 0x5700e900;
+		break;
+	case MMC_SEND_CSD:
+		/* Note: this is a real CSD from Wandboard int mmc */
+		mmcio->cmd.resp[0] = 0x400e0032;
+		mmcio->cmd.resp[1] = 0x5b590000;
+		mmcio->cmd.resp[2] = 0x751f7f80;
+		mmcio->cmd.resp[3] = 0x0a404000;
+		break;
+	case MMC_READ_SINGLE_BLOCK:
+	case MMC_READ_MULTIPLE_BLOCK:
+		strcpy(mmcio->cmd.data->data, "WTF?!");
+		break;
+	default:
+		device_printf(sc->dev, "mmcnull_intr_sd: unknown command\n");
+		mmcio->cmd.error = 1;
+	}
+	ccb->ccb_h.status = CAM_REQ_CMP;
+
+	sc->cur_ccb = NULL;
+	xpt_done(ccb);
+}
+
+static void
+mmcnull_intr_sdio_newintr(void *xsc) {
+	struct mmcnull_softc *sc;
+	struct cam_path *dpath;
+
+	sc = (struct mmcnull_softc *) xsc;
+	mtx_assert(&sc->sc_mtx, MA_OWNED);
+	device_printf(sc->dev, "mmcnull_intr_sdio_newintr()\n");
+
+	/* Our path */
+	if (xpt_create_path(&dpath, NULL, cam_sim_path(sc->sim), 0, 0) != CAM_REQ_CMP) {
+		device_printf(sc->dev, "mmcnull_intr_sdio_newintr(): cannot create path\n");
+		return;
+	}
+	xpt_async(AC_UNIT_ATTENTION, dpath, NULL);
+	xpt_free_path(dpath);
+}
+
+static void
+mmcnull_intr_sdio(void *xsc) {
+	struct mmcnull_softc *sc;
+	union ccb *ccb;
+	struct ccb_mmcio *mmcio;
+
+	sc = (struct mmcnull_softc *) xsc;
+	mtx_assert(&sc->sc_mtx, MA_OWNED);
+
+	ccb = sc->cur_ccb;
+	mmcio = &ccb->mmcio;
+	device_printf(sc->dev, "mmcnull_intr: MMC command = %d\n",
+		      mmcio->cmd.opcode);
+
+	switch (mmcio->cmd.opcode) {
+	case MMC_GO_IDLE_STATE:
+		device_printf(sc->dev, "Reset device\n");
+		break;
+	case SD_SEND_IF_COND:
+		mmcio->cmd.resp[0] = 0x1AA; // To match mmc_xpt expectations :-)
+		break;
+	case MMC_APP_CMD:
+		mmcio->cmd.resp[0] = R1_APP_CMD;
+		break;
+	case IO_SEND_OP_COND:
+		mmcio->cmd.resp[0] = 0x12345678;
+		mmcio->cmd.resp[0] |= ~ R4_IO_MEM_PRESENT;
+		break;
+	case SD_SEND_RELATIVE_ADDR:
+	case MMC_SELECT_CARD:
+		mmcio->cmd.resp[0] = 0x1 << 16;
+		break;
+	case ACMD_SD_SEND_OP_COND:
+		/* TODO: steal valid OCR from somewhere :-) */
+		mmcio->cmd.resp[0] = 0x123;
+		mmcio->cmd.resp[0] |= MMC_OCR_CARD_BUSY;
+		break;
+	case MMC_ALL_SEND_CID:
+		mmcio->cmd.resp[0] = 0x1234;
+		mmcio->cmd.resp[1] = 0x5678;
+		mmcio->cmd.resp[2] = 0x9ABC;
+		mmcio->cmd.resp[3] = 0xDEF0;
+		break;
+	case MMC_READ_SINGLE_BLOCK:
+	case MMC_READ_MULTIPLE_BLOCK:
+		strcpy(mmcio->cmd.data->data, "WTF?!");
+		break;
+	case SD_IO_RW_DIRECT:
+		device_printf(sc->dev, "Scheduling interrupt generation...\n");
+		callout_reset(&sc->tick, hz / 10, mmcnull_intr_sdio_newintr, sc);
+		break;
+	default:
+		device_printf(sc->dev, "mmcnull_intr_sdio: unknown command\n");
+	}
+	ccb->ccb_h.status = CAM_REQ_CMP;
+
+	sc->cur_ccb = NULL;
+	xpt_done(ccb);
+}
+
+/*
+ * This is a MMC IO handler
+ * It extracts MMC command from CCB and sends it
+ * to the h/w
+ */
+static void
+mmcnull_handle_mmcio(struct cam_sim *sim, union ccb *ccb)
+{
+	struct mmcnull_softc *sc;
+	struct ccb_mmcio *mmcio;
+
+	sc = cam_sim_softc(sim);
+	mmcio = &ccb->mmcio;
+	ccb->ccb_h.status = CAM_REQ_INPROG;
+	sc->cur_ccb = ccb;
+
+	/* Real h/w will wait for the interrupt */
+	if (is_sdio_mode)
+		callout_reset(&sc->tick, hz / 10, mmcnull_intr_sdio, sc);
+	else
+		callout_reset(&sc->tick, hz / 10, mmcnull_intr_sd, sc);
+}
+
+static void
+mmcnull_action_sd(struct cam_sim *sim, union ccb *ccb)
+{
+	struct mmcnull_softc *sc;
+
+	sc = cam_sim_softc(sim);
+	if (sc == NULL) {
+		ccb->ccb_h.status = CAM_SEL_TIMEOUT;
+		xpt_done(ccb);
+		return;
+	}
+
+	mtx_assert(&sc->sc_mtx, MA_OWNED);
+
+	device_printf(sc->dev, "action: func_code %0x\n", ccb->ccb_h.func_code);
+
+	switch (ccb->ccb_h.func_code) {
+	case XPT_PATH_INQ:
+	{
+		struct ccb_pathinq *cpi;
+
+		cpi = &ccb->cpi;
+		cpi->version_num = 1;
+		cpi->hba_inquiry = PI_SDTR_ABLE | PI_TAG_ABLE | PI_WIDE_16;
+		cpi->target_sprt = 0;
+		cpi->hba_misc = PIM_NOBUSRESET | PIM_SEQSCAN;
+		cpi->hba_eng_cnt = 0;
+		cpi->max_target = 0;
+		cpi->max_lun = 0;
+		cpi->initiator_id = 1;
+		strncpy(cpi->sim_vid, "FreeBSD", SIM_IDLEN);
+		strncpy(cpi->hba_vid, "FreeBSD Foundation", HBA_IDLEN);
+		strncpy(cpi->dev_name, cam_sim_name(sim), DEV_IDLEN);
+		cpi->unit_number = cam_sim_unit(sim);
+		cpi->bus_id = cam_sim_bus(sim);
+		cpi->base_transfer_speed = 100; /* XXX WTF? */
+		cpi->protocol = PROTO_MMCSD;
+		cpi->protocol_version = SCSI_REV_0;
+		cpi->transport = XPORT_MMCSD;
+		cpi->transport_version = 0;
+
+		cpi->ccb_h.status = CAM_REQ_CMP;
+		break;
+	}
+	case XPT_GET_TRAN_SETTINGS:
+	{
+		struct ccb_trans_settings *cts = &ccb->cts;
+		struct ccb_trans_settings_mmc *mcts;
+		mcts = &ccb->cts.proto_specific.mmc;
+
+                device_printf(sc->dev, "Got XPT_GET_TRAN_SETTINGS\n");
+
+                cts->protocol = PROTO_MMCSD;
+                cts->protocol_version = 0;
+                cts->transport = XPORT_MMCSD;
+                cts->transport_version = 0;
+                cts->xport_specific.valid = 0;
+		mcts->host_f_max = 12000000;
+		mcts->host_f_min = 200000;
+		mcts->host_ocr = 1; /* Fix this */
+                ccb->ccb_h.status = CAM_REQ_CMP;
+                break;
+        }
+	case XPT_SET_TRAN_SETTINGS:
+		device_printf(sc->dev, "Got XPT_SET_TRAN_SETTINGS, should update IOS...\n");
+		ccb->ccb_h.status = CAM_REQ_CMP;
+		break;
+	case XPT_RESET_BUS:
+		device_printf(sc->dev, "Got XPT_RESET_BUS, ACK it...\n");
+		ccb->ccb_h.status = CAM_REQ_CMP;
+                break;
+	case XPT_MMC_IO:
+		/*
+                 * Here is the HW-dependent part of
+		 * sending the command to the underlying h/w
+		 * At some point in the future an interrupt comes.
+		 * Then the request will be marked as completed.
+		 */
+		device_printf(sc->dev, "Got XPT_MMC_IO\n");
+		mmcnull_handle_mmcio(sim, ccb);
+		return;
+		break;
+        case XPT_RESET_DEV:
+                /* This is sent by `camcontrol reset`*/
+                device_printf(sc->dev, "Got XPT_RESET_DEV\n");
+		ccb->ccb_h.status = CAM_REQ_CMP;
+                break;
+	default:
+		device_printf(sc->dev, "Func code %d is unknown\n", ccb->ccb_h.func_code);
+		ccb->ccb_h.status = CAM_REQ_INVALID;
+		break;
+	}
+	xpt_done(ccb);
+	return;
+}
+
+static void
+mmcnull_action_sdio(struct cam_sim *sim, union ccb *ccb) {
+	mmcnull_action_sd(sim, ccb);
+}
+
+static void
+mmcnull_poll(struct cam_sim *sim)
+{
+	return;
+}
+
+
+static device_method_t mmcnull_methods[] = {
+	/* Device interface */
+	DEVMETHOD(device_identify,      mmcnull_identify),
+	DEVMETHOD(device_probe,         mmcnull_probe),
+	DEVMETHOD(device_attach,        mmcnull_attach),
+	DEVMETHOD(device_detach,        mmcnull_detach),
+	DEVMETHOD_END
+};
+
+static driver_t mmcnull_driver = {
+	"mmcnull", mmcnull_methods, sizeof(struct mmcnull_softc)
+};
+
+static devclass_t mmcnull_devclass;
+
+DRIVER_MODULE(mmcnull, isa, mmcnull_driver, mmcnull_devclass, 0, 0);

Added: head/sys/modules/mmcnull/Makefile
==============================================================================
--- /dev/null	00:00:00 1970	(empty, because file is newly added)
+++ head/sys/modules/mmcnull/Makefile	Sun Jul  9 17:02:47 2017	(r320845)
@@ -0,0 +1,8 @@
+# $FreeBSD$
+
+.PATH: ${.CURDIR}/../../dev/mmcnull
+
+KMOD=	mmcnull
+SRCS=	mmcnull.c device_if.h bus_if.h
+
+.include <bsd.kmod.mk>



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201707091702.v69H2lOf000852>