Date: Mon, 9 Sep 2002 23:01:41 -0400 From: Dan Hopkins <hop@nexthop.net> To: Scott Long <scott_long@btc.adaptec.com> Cc: Xride Xride <xride@hotmail.com>, freebsd-stable@FreeBSD.ORG Subject: Re: ESS soundcard not working Message-ID: <20020910030140.GA12954@rinzai.nexthop.net> In-Reply-To: <20020909154540.GA41972@hollin.btc.adaptec.com> References: <F53ur2iz2Mb1s7nlT2N00000088@hotmail.com> <20020909154540.GA41972@hollin.btc.adaptec.com>
next in thread | previous in thread | raw e-mail | index | archive | help
I am having a similar problem with my Compaq Armada M700
I have 'device pcm' in the kernel config.
After the new kernel (with 'device pcm') is installed, xmms and mpg321
report (visually) that they are working but no audio is heard.
Win2k tells me that the card is: "ESS Maestro2E PCI Audio Drive"
Location: "PCI bus 0, device 8, function 0"
Thanks in advance,
-hop
hydrogen:~$ sudo pciconf -l
chip0@pci0:0:0: class=0x060000 card=0xb1100e11 chip=0x71908086 rev=0x03 hdr=0x00
pcib1@pci0:1:0: class=0x060400 card=0x00000000 chip=0x71918086 rev=0x03 hdr=0x01
pcic0@pci0:4:0: class=0x060700 card=0xb1130e11 chip=0xac1b104c rev=0x03 hdr=0x02
pcic1@pci0:4:1: class=0x060700 card=0xb1130e11 chip=0xac1b104c rev=0x03 hdr=0x02
isab0@pci0:7:0: class=0x068000 card=0x00000000 chip=0x71108086 rev=0x02 hdr=0x00
atapci0@pci0:7:1: class=0x010180 card=0x00000000 chip=0x71118086 rev=0x01 hdr=0x00
uhci0@pci0:7:2: class=0x0c0300 card=0x00000000 chip=0x71128086 rev=0x01 hdr=0x00
chip1@pci0:7:3: class=0x068000 card=0x00000000 chip=0x71138086 rev=0x03 hdr=0x00
pcm0@pci0:8:0: class=0x040100 card=0xb1120e11 chip=0x1978125d rev=0x10 hdr=0x00
fxp0@pci0:9:0: class=0x020000 card=0x22038086 chip=0x12298086 rev=0x09 hdr=0x00
none0@pci0:9:1: class=0x070000 card=0x22038086 chip=0x044511c1 rev=0x00 hdr=0x00
none1@pci1:0:0: class=0x030000 card=0xb1110e11 chip=0x4c4d1002 rev=0x64 hdr=0x00
hydrogen:~$
hydrogen:~$ dmesg
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.7-PRERELEASE #1: Mon Sep 9 20:31:11 EDT 2002
root@hydrogen.somewhere.com:/usr/obj/usr/src/sys/HYDROGEN
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (696.84-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x686 Stepping = 6
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 268369920 (262080K bytes)
avail memory = 255705088 (249712K bytes)
Preloaded elf kernel "kernel" at 0xc054c000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 268435454 entries at 0xc00f0970
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <ATI Mobility-1 graphics accelerator> at 0.0 irq 11
pcic0: <TI PCI-1450 PCI-CardBus Bridge> mem 0x42080000-0x42080fff irq 11 at device 4.0 on pci0
pcic0: TI12XX PCI Config Reg: [speaker enable][pwr save][CSC serial isa irq]
pccard0: <PC Card bus (classic)> on pcic0
pcic1: <TI PCI-1450 PCI-CardBus Bridge> mem 0x42100000-0x42100fff irq 11 at device 4.1 on pci0
pcic1: TI12XX PCI Config Reg: [speaker enable][pwr save][CSC serial isa irq]
pccard1: <PC Card bus (classic)> on pcic1
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0x4010-0x401f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x4020-0x403f irq 11 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
chip1: <Intel 82371AB Power management controller> port 0x4000-0x400f at device 7.3 on pci0
pcm0: <ESS Technology Maestro-2E> port 0x4400-0x44ff irq 11 at device 8.0 on pci0
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x4040-0x407f mem 0x42000000-0x4201ffff,0x42180000-0x42180fff irq 11 at device 9.0 on pci0
fxp0: Ethernet address 00:d0:59:15:bd:16
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: <unknown card> (vendor=0x11c1, dev=0x0445) at 9.1 irq 11
orm0: <Option ROMs> at iomem 0xc0000-0xcffff,0xd0000-0xd17ff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ad0: DMA limited to UDMA33, non-ATA66 cable or device
pccard: card inserted, slot 1
pccard: card removed, slot 1
ad0: 11513MB <IBM-DARA-212000> [23392/16/63] at ata0-master UDMA33
acd0: DVD-ROM <Compaq DVD-ROM SD-C2402> at ata0-slave PIO4
Mounting root from ufs:/dev/ad0s2a
pccard: card inserted, slot 1
hydrogen:~$
hydrogen:~$ kldstat -v | grep snd
121 isa/snd_ad1816
122 isa/snd_es1888
123 sbc/snd_ess
125 isa/snd_gusc
126 isa/snd_mss
127 isa/snd_pnpmss
128 gusc/snd_guspcm
129 sbc/snd_sb16
130 sbc/snd_sb8
131 isa/snd_sbc
132 pci/snd_als4000
133 pci/snd_cmi
134 pci/snd_cs4281
135 pci/snd_csa
136 csa/snd_csapcm
137 pci/snd_ds1
138 pci/snd_emu10k1
140 pci/snd_es137x
141 pci/snd_fm801
142 pci/snd_ich
143 pci/snd_maestro
144 pci/snd_neomagic
145 pci/snd_solo
146 pci/snd_t4dwave
147 pci/snd_via8233
148 pci/snd_via82c686
149 pci/snd_vibes
162 snd_pcm
5 1 0xc176d000 14000 snd_pcm.ko
hydrogen:~$
hydrogen:~$ diff /usr/src/sys/i386/conf/GENERIC /usr/src/sys/i386/conf/HYDROGEN
70a71,72
> device pcm
>
128,133c130,135
< device aac # Adaptec FSA RAID, Dell PERC2/PERC3
< device aacp # SCSI passthrough for aac (requires CAM)
< device ida # Compaq Smart RAID
< device amr # AMI MegaRAID
< device mlx # Mylex DAC960 family
< device twe # 3ware Escalade
---
> #device aac # Adaptec FSA RAID, Dell PERC2/PERC3
> #device aacp # SCSI passthrough for aac (requires CAM)
> #device ida # Compaq Smart RAID
> #device amr # AMI MegaRAID
> #device mlx # Mylex DAC960 family
> #device twe # 3ware Escalade
hydrogen:~$
on Monday in the AM, Scott Long wrote:
> On Mon, Sep 09, 2002 at 07:53:04AM +0000, Xride Xride wrote:
> > Hi
> >
> > I have a compaq armada 7400 with an ESS soundcard buildin.
> > This card work with stable till 1-2 months ago and haven't worked
> > since. I have this in my kernel:
> > device pcm
> >
> > It is not even found during boot.
> > It is a PCI card, is there a way that I can see if the card is
> > dead or better get it to work again.
> >
> > Best regards Soren
>
> What kind of ESS sound card? Can you send us the output of 'dmesg'
> and 'pciconf -l'? Thanks.
>
> Scott
>
> To Unsubscribe: send mail to majordomo@FreeBSD.org
> with "unsubscribe freebsd-stable" in the body of the message
--
dan hopkins hop@nexthop.net
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020910030140.GA12954>