Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 12 Dec 2020 23:53:12 +0100
From:      Daniel Engberg <daniel.engberg.lists@pyret.net>
To:        freebsd-arm@freebsd.org
Subject:   Re: FreeBSD-13.0-CURRENT-arm64-aarch64-ROCKPRO64-20201210-7578a4862f0 broken ?
Message-ID:  <a9fca4d433dadbe2d1ca490bff3b189a@pyret.net>

next in thread | raw e-mail | index | archive | help
Hi,

While I haven't tried the exact version you're referring to I have a 
slightly older image that I compiled myself and it runs fine. The only 
difference I can tell is that the memory (RAM) seems to be configure 
different on your device. I can provide a copy of the image if you want.

U-Boot TPL 2020.10 (Dec 02 2020 - 23:00:31)
Channel 0: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB
Channel 1: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB
256B stride
lpddr4_set_rate: change freq to 400000000 mhz 0, 1
lpddr4_set_rate: change freq to 800000000 mhz 1, 0
Trying to boot from BOOTROM
Returning to boot ROM...

U-Boot SPL 2020.10 (Dec 02 2020 - 23:00:31 +0000)
Trying to boot from MMC1


U-Boot 2020.10 (Dec 02 2020 - 23:00:31 +0000)

SoC: Rockchip rk3399
Reset cause: POR
Model: Pine64 RockPro64 v2.1
DRAM:  3.9 GiB
PMIC:  RK808
MMC:   mmc@fe310000: 2, mmc@fe320000: 1, sdhci@fe330000: 0
Loading Environment from SPIFlash... SF: Detected gd25q128 with page 
size 256 Bytes, erase size 4 KiB, total 16 MiB
*** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
Model: Pine64 RockPro64 v2.1
Net:   eth0: ethernet@fe300000
starting USB...
Bus usb@fe380000: USB EHCI 1.00
Bus usb@fe3a0000: USB OHCI 1.0
Bus usb@fe3c0000: USB EHCI 1.00
Bus usb@fe3e0000: USB OHCI 1.0
Bus dwc3: usb maximum-speed not found
Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.10
scanning bus usb@fe380000 for devices... 1 USB Device(s) found
scanning bus usb@fe3a0000 for devices... ERROR:  USB-error: 
DEVICENOTRESPONDING: Device did not respond to token (IN) or did
not provide a handshake (OUT) (5)
ERROR: USB-error: DEVICENOTRESPONDING: Device did not respond to token 
(IN) or did
not provide a handshake (OUT) (5)
unable to get device descriptor (error=-1)
1 USB Device(s) found
scanning bus usb@fe3c0000 for devices... 1 USB Device(s) found
scanning bus usb@fe3e0000 for devices... 1 USB Device(s) found
scanning bus dwc3 for devices... 2 USB Device(s) found
        scanning usb for storage devices... 1 Storage Device(s) found
Hit any key to stop autoboot:  0
Card did not respond to voltage select!
switch to partitions #0, OK
mmc1 is current device
Scanning mmc 1:1...
76003 bytes read in 9 ms (8.1 MiB/s)
Found EFI removable media binary efi/boot/bootaa64.efi
Card did not respond to voltage select!
Scanning disk mmc@fe310000.blk...
Disk mmc@fe310000.blk not ready
Scanning disk mmc@fe320000.blk...
** Unrecognized filesystem type **
Card did not respond to voltage select!
Scanning disk sdhci@fe330000.blk...
Disk sdhci@fe330000.blk not ready
Scanning disk usb_mass_storage.lun0...
** Unrecognized filesystem type **
** Unrecognized filesystem type **
** Unrecognized filesystem type **
** Unrecognized filesystem type **
** Unrecognized filesystem type **
Found 9 disks
** Unable to read file ubootefi.var **
Failed to load EFI variables
BootOrder not defined
EFI boot manager: Cannot load any image
1179528 bytes read in 55 ms (20.5 MiB/s)
Booting /efi\boot\bootaa64.efi
Consoles: EFI console
     Reading loader env vars from /efi/freebsd/loader.env
Setting currdev to disk0p1:
FreeBSD/arm64 EFI loader, Revision 1.1
(Thu Dec  3 00:33:36 UTC 2020 diizzy@devbox-fbsd13-hyperv.pyret.net)

    Command line arguments: loader.efi
    Image base: 0xf0de1000
    EFI version: 2.80
    EFI Firmware: Das U-Boot (rev 8224.4096)
    Console: comconsole (0)
    Load Path: /efi\boot\bootaa64.efi
    Load Device: 
/VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/SD(1)/SD(0)/HD(1,GPT,a66e2bd7-3501-11eb-95ef-00155d01f202,0x8000,0x19000)
Trying ESP: 
/VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/SD(1)/SD(0)/HD(1,GPT,a66e2bd7-3501-11eb-95ef-00155d01f202,0x8000,0x19000)
Setting currdev to disk0p1:
Trying: 
/VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/SD(1)/SD(0)/HD(2,GPT,a66e2bd7-3501-11eb-95ef-00155d01f202,0x21000,0x5def80)
Setting currdev to disk0p2:
Loading /boot/defaults/loader.conf
Loading /boot/defaults/loader.conf
Loading /boot/device.hints
Loading /boot/loader.conf
Loading /boot/loader.conf.local
-
Loading kernel...
/boot/kernel/kernel text=0x2a8 text=0x92abb4 text=0x1b7194 data=0x199040 
data=0x0+0x4a3cbe syms=[0x8+0x112b90+0x8+0x137a5a]
Loading configured modules...
/boot/kernel/umodem.ko text=0x1c00 text=0xfb0 data=0x618+0x8 
syms=[0x8+0xcc0+0x8+0xabf]
loading required module 'ucom'
/boot/kernel/ucom.ko text=0x1d38 text=0x2c18 data=0x820+0x850 
syms=[0x8+0xfc0+0x8+0xafc]
can't find '/etc/hostid'
can't find '/boot/entropy'

Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [/boot/kernel/kernel]...
Using DTB provided by EFI at 0x80ea000.
---<<BOOT>>---
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2020 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
         The Regents of the University of California. All rights 
reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.0-CURRENT #0 9dce7b41255-c273310(master): Thu Dec  3 00:50:51 
UTC 2020
     
diizzy@devbox-fbsd13-hyperv.pyret.net:/usr/obj/usr/src/arm64.aarch64/sys/GENERIC-NODEBUG 
arm64
FreeBSD clang version 11.0.0 (git@github.com:llvm/llvm-project.git 
llvmorg-11.0.0-0-g176249bd673)
VT: init without driver.
module firmware already present!
real memory  = 4158332928 (3965 MB)
avail memory = 4031787008 (3845 MB)
Starting CPU 1 (1)
Starting CPU 2 (2)
Starting CPU 3 (3)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
arc4random: WARNING: initial seeding bypassed the cryptographic random 
device because it was not yet seeded and the knob 
'bypass_before_seeding' was enabled.
random: entropy device external interface
MAP f0f07000 mode 2 pages 1
MAP f0f0b000 mode 2 pages 3
MAP f0f0f000 mode 2 pages 4
MAP f3f40000 mode 2 pages 16
WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 
13.0.
kbd0 at kbdmux0
WARNING: Device "openfirm" is Giant locked and may be deleted before 
FreeBSD 13.0.
ofwbus0: <Open Firmware Device Tree>
clk_fixed0: <Fixed clock> on ofwbus0
simplebus0: <Flattened device tree simple bus> on ofwbus0
rk_grf0: <RockChip General Register Files> mem 0xff320000-0xff320fff on 
ofwbus0
rk3399_pmucru0: <Rockchip RK3399 PMU Clock and Reset Unit> mem 
0xff750000-0xff750fff on ofwbus0
rk3399_cru0: <Rockchip RK3399 Clock and Reset Unit> mem 
0xff760000-0xff760fff on ofwbus0
rk_grf1: <RockChip General Register Files> mem 0xff770000-0xff77ffff on 
ofwbus0
clk_fixed1: <Fixed clock> on ofwbus0
regfix0: <Fixed Regulator> on ofwbus0
regfix1: <Fixed Regulator> on ofwbus0
regfix2: <Fixed Regulator> on ofwbus0
regfix3: <Fixed Regulator> on ofwbus0
regfix4: <Fixed Regulator> on ofwbus0
regfix5: <Fixed Regulator> on ofwbus0
regfix6: <Fixed Regulator> on ofwbus0
regfix7: <Fixed Regulator> on ofwbus0
regfix8: <Fixed Regulator> on ofwbus0
simple_mfd0: <Simple MFD (Multi-Functions Device)> mem 
0xff310000-0xff310fff on ofwbus0
psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0
gic0: <ARM Generic Interrupt Controller v3.0> mem 
0xfee00000-0xfee0ffff,0xfef00000-0xfefbffff,0xfff00000-0xfff0ffff,0xfff10000-0xfff1ffff,0xfff20000-0xfff2ffff 
irq 18 on ofwbus0
its0: <ARM GIC Interrupt Translation Service> mem 0xfee20000-0xfee3ffff 
on gic0
rk_iodomain0: <RockChip IO Voltage Domain> mem 0xff320000-0xff320fff on 
rk_grf0
rk_iodomain1: <RockChip IO Voltage Domain> mem 0-0xff76ffff,0-0xffff on 
rk_grf1
rk_pinctrl0: <RockChip Pinctrl controller> on ofwbus0
gpio0: <RockChip GPIO Bank controller> mem 0xff720000-0xff7200ff irq 71 
on rk_pinctrl0
gpiobus0: <OFW GPIO bus> on gpio0
gpio1: <RockChip GPIO Bank controller> mem 0xff730000-0xff7300ff irq 72 
on rk_pinctrl0
gpiobus1: <OFW GPIO bus> on gpio1
gpio2: <RockChip GPIO Bank controller> mem 0xff780000-0xff7800ff irq 73 
on rk_pinctrl0
gpiobus2: <OFW GPIO bus> on gpio2
gpio3: <RockChip GPIO Bank controller> mem 0xff788000-0xff7880ff irq 74 
on rk_pinctrl0
gpiobus3: <OFW GPIO bus> on gpio3
gpio4: <RockChip GPIO Bank controller> mem 0xff790000-0xff7900ff irq 75 
on rk_pinctrl0
gpiobus4: <OFW GPIO bus> on gpio4
rk_i2c0: <RockChip I2C> mem 0xff110000-0xff110fff irq 20 on ofwbus0
iicbus0: <OFW I2C bus> on rk_i2c0
rk_i2c1: <RockChip I2C> mem 0xff130000-0xff130fff irq 22 on ofwbus0
iicbus1: <OFW I2C bus> on rk_i2c1
rk_i2c2: <RockChip I2C> mem 0xff3c0000-0xff3c0fff irq 38 on ofwbus0
iicbus2: <OFW I2C bus> on rk_i2c2
syr8270: <Silergy SYR827 regulator> at addr 0x80 on iicbus2
rk_i2c3: <RockChip I2C> mem 0xff3d0000-0xff3d0fff irq 39 on ofwbus0
iicbus3: <OFW I2C bus> on rk_i2c3
rk805_pmu0: <RockChip RK805 PMIC> at addr 0x36 irq 76 on iicbus2
generic_timer0: <ARMv8 Generic Timer> irq 2,3,4,5 on ofwbus0
Timecounter "ARM MPCore Timecounter" frequency 24000000 Hz quality 1000
Event timer "ARM MPCore Eventtimer" frequency 24000000 Hz quality 1000
rk_tsadc0: <RockChip temperature sensors> mem 0xff260000-0xff2600ff irq 
35 on ofwbus0
rk_usb2phy0: <Rockchip RK3399 USB2PHY> mem 0-0xff76ffff,0-0xffff on 
rk_grf1
rk_usb2phy1: <Rockchip RK3399 USB2PHY> mem 0-0xff76ffff,0-0xffff on 
rk_grf1
rk_emmcphy0: <Rockchip RK3399 eMMC PHY> mem 0-0xff76ffff,0-0xffff on 
rk_grf1
rk_pcie_phy0: <Rockchip RK3399 PCIe PHY> mem 0-0xff76ffff,0-0xffff on 
rk_grf1
rk_typec_phy0: <Rockchip RK3399 PHY TYPEC> mem 0xff7c0000-0xff7fffff on 
ofwbus0
rk_typec_phy1: <Rockchip RK3399 PHY TYPEC> mem 0xff800000-0xff83ffff on 
ofwbus0
cpulist0: <Open Firmware CPU Group> on ofwbus0
cpu0: <Open Firmware CPU> on cpulist0
cpufreq_dt0: <Generic cpufreq driver> on cpu0
cpu1: <Open Firmware CPU> on cpulist0
cpufreq_dt1: <Generic cpufreq driver> on cpu1
cpu2: <Open Firmware CPU> on cpulist0
cpufreq_dt2: <Generic cpufreq driver> on cpu2
cpu3: <Open Firmware CPU> on cpulist0
cpufreq_dt3: <Generic cpufreq driver> on cpu3
cpu4: <Open Firmware CPU> on cpulist0
cpufreq_dt4: <Generic cpufreq driver> on cpu4
cpufreq_dt4: Not attaching as cpu is not present
device_attach: cpufreq_dt4 attach returned 6
cpu5: <Open Firmware CPU> on cpulist0
cpufreq_dt5: <Generic cpufreq driver> on cpu5
cpufreq_dt5: Not attaching as cpu is not present
device_attach: cpufreq_dt5 attach returned 6
pcib0: <Rockchip PCIe controller> mem 
0xf8000000-0xf9ffffff,0xfd000000-0xfdffffff irq 6,7,8 on ofwbus0
pci0: <PCI bus> on pcib0
pcib1: <PCI-PCI bridge> at device 0.0 on pci0
pcib0: failed to reserve resource for pcib1
pcib1: failed to allocate initial memory window: 0-0xfffff
pci1: <PCI bus> on pcib1
pcib0: route pin 1 for device 0.0 to 78
pcib0: route pin 2 for device 0.0 to 79
igb0: <Intel(R) PRO/1000 PCI-Express Network Driver> irq 78 at device 
0.0 on pci1
igb0: Using 1024 TX descriptors and 1024 RX descriptors
igb0: Unable to map MSI-X table
igb0: Using an MSI interrupt
igb0: Ethernet address: 00:19:99:ec:17:09
igb1: <Intel(R) PRO/1000 PCI-Express Network Driver> irq 79 at device 
0.1 on pci1
igb1: Using 1024 TX descriptors and 1024 RX descriptors
igb1: Unable to map MSI-X table
igb1: Using an MSI interrupt
igb1: Ethernet address: 00:19:99:ec:17:0a
dwc0: <Rockchip Gigabit Ethernet Controller> mem 0xfe300000-0xfe30ffff 
irq 9 on ofwbus0
miibus0: <MII bus> on dwc0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 0 on 
miibus0
rgephy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 
1000baseT-FDX, 1000baseT-FDX-master, auto
rgephy1: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on 
miibus0
rgephy1:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 
1000baseT-FDX, 1000baseT-FDX-master, auto
dwc0: Ethernet address: 2a:23:f0:90:f3:ae
rockchip_dwmmc0: <Synopsys DesignWare Mobile Storage Host Controller 
(RockChip)> mem 0xfe310000-0xfe313fff irq 10 on ofwbus0
rockchip_dwmmc0: Hardware version ID is 270a
rockchip_dwmmc1: <Synopsys DesignWare Mobile Storage Host Controller 
(RockChip)> mem 0xfe320000-0xfe323fff irq 11 on ofwbus0
rockchip_dwmmc1: Hardware version ID is 270a
mmc0: <MMC/SD bus> on rockchip_dwmmc1
sdhci_fdt0: <Rockchip RK3399 fdt SDHCI controller> mem 
0xfe330000-0xfe33ffff irq 12 on ofwbus0
rk_emmcphy0: got emmcclk clock
sdhci_fdt0-slot0: Hardware doesn't specify timeout clock frequency, 
setting BROKEN_TIMEOUT quirk.
sdhci_fdt0: 1 slot(s) allocated
mmc1: <MMC/SD bus> on sdhci_fdt0
ehci0: <Generic EHCI Controller> mem 0xfe380000-0xfe39ffff irq 13 on 
ofwbus0
usbus0: EHCI version 1.0
usbus0 on ehci0
ohci0: <Generic OHCI Controller> mem 0xfe3a0000-0xfe3bffff irq 14 on 
ofwbus0
usbus1 on ohci0
ehci1: <Generic EHCI Controller> mem 0xfe3c0000-0xfe3dffff irq 15 on 
ofwbus0
usbus2: EHCI version 1.0
usbus2 on ehci1
ohci1: <Generic OHCI Controller> mem 0xfe3e0000-0xfe3fffff irq 16 on 
ofwbus0
usbus3 on ohci1
rk_dwc30: <Rockchip RK3399 DWC3> on ofwbus0
xhci0: Only host mode is supported
xhci0: Only host mode is supported
rk_dwc31: <Rockchip RK3399 DWC3> on ofwbus0
xhci0: <Synopsys Designware DWC3> mem 0xfe900000-0xfe9fffff irq 83 on 
rk_dwc31
xhci0: 64 bytes context size, 32-bit DMA
usbus4: trying to attach
usbus4 on xhci0
iicbus0: <unknown card> at addr 0x22
iic0: <I2C generic I/O> on iicbus0
iic1: <I2C generic I/O> on iicbus1
uart0: <16750 or compatible> mem 0xff180000-0xff1800ff irq 26 on ofwbus0
uart1: <16750 or compatible> mem 0xff1a0000-0xff1a00ff irq 28 on ofwbus0
uart1: console (1500000,n,8,1)
spi0: <Rockchip SPI> mem 0xff1d0000-0xff1d0fff irq 31 on ofwbus0
spibus0: <OFW SPI bus> on spi0
spibus0: <unknown card> at cs 0 mode 0
iicbus2: <unknown card> at addr 0x82
iic2: <I2C generic I/O> on iicbus2
iicbus3: <unknown card> at addr 0x44
iic3: <I2C generic I/O> on iicbus3
pwm0: <Rockchip PWM> mem 0xff420000-0xff42000f on ofwbus0
pwmbus0: <OFW PWM bus> on pwm0
pwmc0: <PWM Control> channel 0 on pwmbus0
pwm1: <Rockchip PWM> mem 0xff420010-0xff42001f on ofwbus0
pwmbus1: <OFW PWM bus> on pwm1
pwmc1: <PWM Control> channel 0 on pwmbus1
pwm2: <Rockchip PWM> mem 0xff420020-0xff42002f on ofwbus0
pwmbus2: <OFW PWM bus> on pwm2
pwmc2: <PWM Control> channel 0 on pwmbus2
gpioc0: <GPIO controller> on gpio0
gpioc1: <GPIO controller> on gpio1
gpioc2: <GPIO controller> on gpio2
gpioc3: <GPIO controller> on gpio3
gpioc4: <GPIO controller> on gpio4
gpioled0: <GPIO LEDs> on ofwbus0
cryptosoft0: <software crypto>
cpufreq_dt4: <Generic cpufreq driver> on cpu4
cpufreq_dt4: Not attaching as cpu is not present
device_attach: cpufreq_dt4 attach returned 6
cpufreq_dt5: <Generic cpufreq driver> on cpu5
cpufreq_dt5: Not attaching as cpu is not present
device_attach: cpufreq_dt5 attach returned 6
Timecounters tick every 1.000 msec
usbus0: 480Mbps High Speed USB v2.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 480Mbps High Speed USB v2.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 5.0Gbps Super Speed USB v3.0
ugen2.1: <Generic EHCI root HUB> at usbus2
uhub0 on usbus2
uhub0: <Generic EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on 
usbus2
ugen1.1: <Generic OHCI root HUB> at usbus1
uhub1 on usbus1
uhub1: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on 
usbus1
ugen4.1: <Synopsys XHCI root HUB> at usbus4
uhub2 on usbus4
uhub2: <Synopsys XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on 
usbus4
ugen3.1: <Generic OHCI root HUB> at usbus3
uhub3 on usbus3
uhub3: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on 
usbus3
ugen0.1: <Generic EHCI root HUB> at usbus0
uhub4 on usbus0
uhub4: <Generic EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on 
usbus0
mmcsd0: 63GB <SDHC 00000 1.0 SN FDF704CD MFG 12/2013 by 27 SM> at mmc0 
50.0MHz/4bit/2048-block
mmc1: No compatible cards found on bus
Release APs...done
CPU  0: ARM Cortex-A53 r0p4 affinity:  0
                    Cache Type = <64 byte D-cacheline,64 byte 
I-cacheline,VIPT ICache,64 byte ERG,64 byte CWG>
Trying to mount root from ufs:/dev/ufs/rootfs [rw]...
  Instruction Set Attributes 0 = <CRC32,SHA2,SHA1,AES+PMULL>
  Instruction Set Attributes 1 = <>
          Processor Features 0 = <GIC,AdvSIMD,FP,EL3 32,EL2 32,EL1 32,EL0 
32>
          Processor Features 1 = <>
       Memory Model Features 0 = <TGran4,TGran64,SNSMem,BigEnd,16bit 
ASID,1TB PA>
       Memory Model Features 1 = <8bit VMID>
       Memory Model Features 2 = <32bit CCIDX,48bit VA>
              Debug Features 0 = <2 CTX BKPTs,4 Watchpoints,6 
Breakpoints,PMUv3,Debugv8>
              Debug Features 1 = <>
          Auxiliary Features 0 = <>
          Auxiliary Features 1 = <>
CPU  1: ARM Cortex-A53 r0p4 affinity:  1
CPU  2: ARM Cortex-A53 r0p4 affinity:  2
CPU  3: ARM Cortex-A53 r0p4 affinity:  3
Warning: no time-of-day clock registered, system time will not be set 
accurately
Dual Console: Serial Primary, Video Secondary
uhub1: 1 port with 1 removable, self powered
uhub3: 1 port with 1 removable, self powered
uhub2: 2 ports with 2 removable, self powered
Growing root partition to fill device
random: randomdev_wait_until_seeded unblock wait
uhub0: 1 port with 1 removable, self powered
uhub4: 1 port with 1 removable, self powered
ugen1.2: <Apple, Inc. USB-C to 3.5mm Headphone Jack Adapter> at usbus1
ugen4.2: <Ugreen Ugreen Storage Device> at usbus4
umass0 on uhub2
umass0: <Ugreen Ugreen Storage Device, class 0/0, rev 3.00/1.00, addr 1> 
on usbus4
da0 at umass-sim0 bus 0 scbus0 target 0 lun 0
da0: <Hitachi HTS543232A7A384 0> Fixed Direct Access SPC-4 SCSI device
da0: Serial Number 022009027113
da0: 400.000MB/s transfers
da0: 305245MB (625142448 512 byte sectors)
da0: quirks=0x2<NO_6_BYTE>
random: randomdev_wait_until_seeded unblock wait
random: unblocking device.
mmcsd0 recovering is not needed
mmcsd0p2 resized
gpart: arg0 'ufs/rootfs': Invalid argument
super-block backups (for fsck_ffs -b #) at:
  6402432, 7682880, 8963328, 10243776, 11524224, 12804672, 14085120, 
15365568,
  16646016, 17926464, 19206912, 20487360, 21767808, 23048256, 24328704,
  25609152, 26889600, 28170048, 29450496, 30730944, 32011392, 33291840,
  34572288, 35852736, 37133184, 38413632, 39694080, 40974528, 42254976,
  43535424, 44815872, 46096320, 47376768, 48657216, 49937664, 51218112,
  52498560, 53779008, 55059456, 56339904, 57620352, 58900800, 60181248,
  61461696, 62742144, 64022592, 65303040, 66583488, 67863936, 69144384,
  70424832, 71705280, 72985728, 74266176, 75546624, 76827072, 78107520,
  79387968, 80668416, 81948864, 83229312, 84509760, 85790208, 87070656,
  88351104, 89631552, 90912000, 92192448, 93472896, 94753344, 96033792,
  97314240, 98594688, 99875136, 101155584, 102436032, 103716480, 
104996928,
  106277376, 107557824, 108838272, 110118720, 111399168, 112679616, 
113960064,
  115240512, 116520960, 117801408, 119081856, 120362304, 121642752
No suitable dump device was found.
Setting hostuuid: 35303730-3963-6534-3738-363339366662.
Setting hostid: 0xe60aab1a.
Starting file system checks:
/dev/ufs/rootfs: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ufs/rootfs: clean, 14653957 free (109 frags, 1831731 blocks, 0.0% 
fragmentation)
Mounting local filesystems:.
Setting hostname: generic-nodebug.
Setting up harvesting: 
[UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,[NET_ETHER],NET_TUN,MOUSE,KEYBOARD,ATTACH,CACHED
Feeding entropy: .
Building /boot/kernel/linker.hints
ELF ldconfig path: /lib /usr/lib /usr/lib/compat
lo0: link state changed to UP
dwc0: link state changed to DOWN
Starting Network: lo0 igb0 igb1 dwc0.
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
         options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
         inet6 ::1 prefixlen 128
         inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4
         inet 127.0.0.1 netmask 0xff000000
         groups: lo
         nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
igb0: flags=8863<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 
1500
         
options=4e527bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,WOL_MAGIC,VLAN_HWFILTER,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6,NOMAP>
         ether 00:19:99:ec:17:09
         media: Ethernet autoselect
         status: no carrier
         nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
igb1: flags=8863<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 
1500
         
options=4e507bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,VLAN_HWFILTER,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6,NOMAP>
         ether 00:19:99:ec:17:0a
         media: Ethernet autoselect
         status: no carrier
         nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
dwc0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 
1500
         options=8000b<RXCSUM,TXCSUM,VLAN_MTU,LINKSTATE>
         ether 2a:23:f0:90:f3:ae
         media: Ethernet autoselect (none)
         status: no carrier
         nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
Starting devd.
igb0: link state changed to UP
Autoloading module: mx25l.ko
mx25l0: <M25Pxx Flash Family> at cs 0 mode 0 on spibus0
mx25l0: device type gd25q128, size 16384K in 256 sectors of 64K, erase 
size 4K
Autoloading module: snd_uaudio.ko
uaudio0 on uhub1
uaudio0: <Apple, Inc. USB-C to 3.5mm Headphone Jack Adapter, class 
239/2, rev 2.01/26.11, addr 2> on usbus1
Autoloading module: uhid.ko
Autoloading module: wmt.ko
Autoloading module: uhid.ko
Autoloading module: wmt.ko
uaudio0: Play[0]: 48000 Hz, 2 ch, 24-bit S-LE PCM format, 2x8ms buffer.
uaudio0: Play[0]: 44100 Hz, 2 ch, 24-bit S-LE PCM format, 2x8ms buffer.
uaudio0: No recording.
uaudio0: No MIDI sequencer.
pcm0: <USB audio> on uaudio0
uaudio0: HID volume keys found.
uhid0 on uhub1
uhid0: <Apple, Inc. USB-C to 3.5mm Headphone Jack Adapter, class 239/2, 
rev 2.01/26.11, addr 2> on usbus1
Starting dhclient.
DHCPDISCOVER on igb0 to 255.255.255.255 port 67 interval 7
DHCPOFFER from 192.168.1.1
DHCPREQUEST on igb0 to 255.255.255.255 port 67
DHCPACK from 192.168.1.1
bound to 192.168.1.235 -- renewal in 41400 seconds.
add host 127.0.0.1: gateway lo0 fib 0: route already in table
add host ::1: gateway lo0 fib 0: route already in table
add net fe80::: gateway ::1
add net ff02::: gateway ::1
add net ::ffff:0.0.0.0: gateway ::1
add net ::0.0.0.0: gateway ::1
Creating and/or trimming log files.
Updating motd:.
Updating /var/run/os-release done.
Starting syslogd.
Clearing /tmp (X related).
Mounting late filesystems:.
Generating RSA host key.
2048 SHA256:Cw4937xzG/Rn5zwrLfhSyFkiEPJrns3rJrbVmrSyB8Q 
root@generic-nodebug (RSA)
Generating ECDSA host key.
256 SHA256:xXYWKHDYD8vPEjLrZero3/bDF+WEjh0GMQvFUeWANxo 
root@generic-nodebug (ECDSA)
Generating ED25519 host key.
256 SHA256:zodq+Jyrpot8kwhpQgsR5KZhV+N3djxGWZ5Tc1YnS5s 
root@generic-nodebug (ED25519)
Performing sanity check on sshd configuration.
Starting sshd.
Starting cron.
Starting background file system checks in 60 seconds.

Thu Dec  3 00:59:23 UTC 2020

FreeBSD/arm64 (generic-nodebug) (ttyu1)

Best regards,
Daniel



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?a9fca4d433dadbe2d1ca490bff3b189a>