Date: Fri, 18 Jun 2004 14:16:23 GMT From: "coadmin@hostings.pl" <coadmin@hostings.pl> To: freebsd-gnats-submit@FreeBSD.org Subject: i386/68080: interrupt was seen but timeout fired (ata) Message-ID: <200406181416.i5IEGN9c096752@www.freebsd.org> Resent-Message-ID: <200406181420.i5IEKOgO009576@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 68080
>Category: i386
>Synopsis: interrupt was seen but timeout fired (ata)
>Confidential: no
>Severity: serious
>Priority: high
>Responsible: freebsd-i386
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Fri Jun 18 14:20:24 GMT 2004
>Closed-Date:
>Last-Modified:
>Originator: coadmin@hostings.pl
>Release: 5.2.1-p5
>Organization:
>Environment:
# uname -a
FreeBSD server.foo 5.2.1-RELEASE-p5 FreeBSD 5.2.1-RELEASE-p5 #0: Sun Jun 13 00:01:33 CEST 2004 root@server.foo:/usr/src/sys/i386/compile/SERVER i386
dmesg:
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2.1-RELEASE-p5 #0: Sun Jun 13 00:01:33 CEST 2004
root@server.foo:/usr/src/sys/i386/compile/SERVER
Preloaded elf kernel "/boot/kernel/kernel" at 0xc07b5000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc07b5294.
ACPI APIC Table: <DELL PE400SC>
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 2.80GHz (2793.02-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf29 Stepping = 9
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH
,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Hyperthreading: 2 logical CPUs
real memory = 1073168384 (1023 MB)
avail memory = 1037201408 (989 MB)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0: Changing APIC ID to 2
ioapic0 <Version 2.0> irqs 0-23 on motherboard
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <DELL PE400SC> on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 8 entries at 0xc00feae0
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_cpu1: <CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82875P host to AGP bridge> mem 0xf0000000-0xf7ffffff at device 0.0 on pci0
pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xff80-0xff9f irq 16 at device 29.0 on pci0
usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xff60-0xff7f irq 19 at device 29.1 on pci0
usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xff40-0xff5f irq 18 at device 29.2 on pci0
usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0xff20-0xff3f irq 16 at device 29.3 on pci0
usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pci2: <display, VGA> at device 0.0 (no driver attached)
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.19> port 0xddc0-0xddff mem 0xfe9e0000-0xfe9
fffff irq 18 at device 12.0 on pci2
em0: Speed:N/A Duplex:N/A
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH5 UDMA100 controller> port 0xffa0-0xffaf,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0
-0x1f7 mem 0xfebffc00-0xfebfffff irq 18 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
atapci1: <Intel ICH5 SATA150 controller> port 0xfea0-0xfeaf,0xfe30-0xfe33,0xfe20-0xfe27,0xfe10-0xfe13
,0xfe00-0xfe07 irq 18 at device 31.2 on pci0
atapci1: [MPSAFE]
ata2: at 0xfe00 on atapci1
ata2: [MPSAFE]
ata3: at 0xfe20 on atapci1
ata3: [MPSAFE]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pci0: <multimedia, audio> at device 31.5 (no driver attached)
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on a
cpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0 port 0x778-0x77f,0x378-0x37f irq 7 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
ppi0: <Parallel I/O> on ppbus0
pmtimer0 on isa0
orm0: <Option ROMs> at iomem 0xc9800-0xcbfff,0xc8000-0xc97ff,0xc0000-0xc7fff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
ipfw2 initialized, divert disabled, rule-based forwarding enabled, default to accept, logging unlimit
ed
GEOM: create disk ad0 dp=0xc76f2c60
ad0: 76293MB <ST380011A> [155009/16/63] at ata0-master UDMA100
acd0: CDROM <Lite-On LTN486S 48x Max> at ata1-master PIO4
SMP: AP CPU #1 Launched!
Mounting root from ufs:/dev/ad0s1a
em0: Link is up 10 Mbps Full Duplex
>Description:
I've timeouts on at0:
Jun 18 13:46:21 server kernel: ad0: WARNING - READ_DMA interrupt was seen but timeout fired LBA=110474079
Jun 18 13:46:48 server kernel: ad0: WARNING - WRITE_DMA interrupt was seen but timeout fired LBA=31849151
Jun 18 13:54:17 server kernel: ad0: WARNING - WRITE_DMA interrupt was seen but timeout fired LBA=32242191
Jun 18 15:21:52 server kernel: ad0: WARNING - WRITE_DMA interrupt was seen but timeout fired LBA=31770663
hdd is good. ata cable too. I have such errors on two freebsd 5.2.1 machines (second one is 5.2.1-p8 also affeceted).
>How-To-Repeat:
don't know
>Fix:
don't know
>Release-Note:
>Audit-Trail:
>Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200406181416.i5IEGN9c096752>