Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 26 Mar 2008 20:31:26 -0700
From:      Predrag Punosevac <punosevac@math.arizona.edu>
To:        Isaac Mushinsky <itz@mushinsky.net>
Cc:        freebsd-questions@freebsd.org
Subject:   Re: hplip setup problems
Message-ID:  <47EB150E.6080007@math.arizona.edu>
In-Reply-To: <200803262215.14727.itz@mushinsky.net>
References:  <200803260021.12249.itz@mushinsky.net> <200803262215.14727.itz@mushinsky.net>

next in thread | previous in thread | raw e-mail | index | archive | help
Isaac Mushinsky wrote:
> On Wednesday 26 March 2008 00:21:12 Isaac Mushinsky wrote:
>   
>> I am close to assasinating my HP Photosmart C4280 in frustration.
>>
>> 1. This is an all-in-one device. (I did not try the scanner setup yet)
>> 2. ulpt, umass, uscanner modules are not in kernel and not kld-loaded.
>> 3. Machine is FreeBSD 7-stable/amd64.
>> 4. hplip is 2.8.2
>>
>> $ usbdevs
>> addr 1: UHCI root hub, Intel
>> addr 1: UHCI root hub, Intel
>> addr 1: UHCI root hub, Intel
>> addr 1: EHCI root hub, Intel
>>  addr 2: Photosmart C4200 series, HP
>> addr 1: UHCI root hub, Intel
>> addr 1: UHCI root hub, Intel
>> addr 1: UHCI root hub, Intel
>> addr 1: EHCI root hub, Intel
>>
>> There is a ppd file for these series with the hplip distribution.
>>
>> hpssd, cups started in the order needed. hp-setup detects the printer, and
>> then says 'Unable to create queue'. CUPS web interface actually adds the
>> printer, but then cannot print test page to it. cups user runs hpssd (I
>> tried root too).
>>
>> /var/log/messages has:
>> Mar 25 23:57:56 omsk python: io/hpmud/musb.c 135: unable
>> get_string_descriptor -5: Input/output error Mar 25 23:57:56 omsk python:
>> io/hpmud/musb.c 1951: invalid serial id string ret=-5
>>
>> Here is all relevant output:
>> http://omsk.mushinsky.net/hplip-trouble
>>
>> Any help is appreciated. Thanks.
>>
>>
>> _______________________________________________
>> freebsd-questions@freebsd.org mailing list
>> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
>> To unsubscribe, send any mail to
>> "freebsd-questions-unsubscribe@freebsd.org"
>>     
>
> final piece of information: sane cannot open the HP all-in-one as a scanner 
> with same error (getting serial id). However, my Nikon LS40-ED (a 35mm film 
> scanner) works fine. So the problem is apparently not my installation or 
> libusb.
>
>   
I would not bet my life on it. There are two ways on which sane-backend 
talk to scanners. Libusb is one of the ways.
I have two Epson scanners. One of them does use libusb one of them 
doesn't not. How do I know. Well in OpenBSD when the scanner uses libusb 
you have to remove uscanner driver from the kernel in order to use it.

Cheers,
Predrag


> ~> sane-find-scanner 
>
>   # sane-find-scanner will now attempt to detect your scanner. If the
>   # result is different from what you expected, first make sure your
>   # scanner is powered up and properly connected to your computer.
>
>   # No SCSI scanners found. If you expected something different, make sure 
> that
>   # you have loaded a kernel SCSI driver for your SCSI adapter.
>
> found USB scanner (vendor=0x04b0 [Nikon], product=0x4000 [LS-40 ED]) at 
> libusb:/dev/usb2:/dev/ugen1
> found USB scanner (vendor=0x03f0 [HP], product=0x5c11 [Photosmart C4200 
> series]) at libusb:/dev/usb3:/dev/ugen0
>   # Your USB scanner was (probably) detected. It may or may not be supported 
> by
>   # SANE. Try scanimage -L and read the backend's manpage.
>
>   # Not checking for parallel port scanners.
>
>   # Most Scanners connected to the parallel port or other proprietary ports
>   # can't be detected by this program.
>
>   # You may want to run this program as root to find all devices. Once you
>   # found the scanner devices, be sure to adjust access permissions as
>   # necessary.
>
> The Nikon scanner works, the HP device fails to return serial id as above.
> _______________________________________________
> freebsd-questions@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org"
>   




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?47EB150E.6080007>