Date: Tue, 7 Mar 2017 14:36:11 -0500 From: Mike Tancsa <mike@sentex.net> To: "freebsd-net@freebsd.org" <freebsd-net@freebsd.org> Subject: Chelsio netmap support ? (RELENG_11) Message-ID: <93e10699-ecc7-c062-bf85-a26de0de9633@sentex.net>
next in thread | raw e-mail | index | archive | help
I have a Chelsio T520 NIC that I have been trying to get netmap working
with. I see reference to the ncxl# vs cxl# interface on the lists, but I
never see ncxl come up. The man pages dont say anything about having to
specifically enable anything that I can see. I am using RELENG11 as of
today (r314848).
---Mike
t5nex0@pci0:2:0:4: class=0x020000 card=0x00001425 chip=0x54071425
rev=0x00 hdr=0x00
vendor = 'Chelsio Communications Inc'
device = 'T520-SO Unified Wire Ethernet Controller'
class = network
subclass = ethernet
bar [10] = type Memory, range 64, base 0xdd300000, size 524288,
enabled
bar [18] = type Memory, range 64, base 0xdc000000, size 16777216,
enabled
bar [20] = type Memory, range 64, base 0xdd884000, size 8192, enabled
cap 01[40] = powerspec 3 supports D0 D3 current D0
cap 05[50] = MSI supports 32 messages, 64 bit, vector masks
cap 10[70] = PCI-Express 2 endpoint max data 256(2048) FLR RO NS
link x8(x8) speed 8.0(8.0)
cap 11[b0] = MSI-X supports 256 messages, enabled
Table in map 0x20[0x0], PBA in map 0x20[0x1000]
cap 03[d0] = VPD
ecap 0001[100] = AER 2 0 fatal 0 non-fatal 1 corrected
ecap 0003[170] = Serial 1 0000000000000000
ecap 000e[190] = ARI 1
ecap 0019[1a0] = PCIe Sec 1 lane errors 0
ecap 0010[1c0] = SR-IOV 1 IOV disabled, Memory Space disabled, ARI
disabled
0 VFs configured out of 0 supported
First VF RID Offset 0x0008, VF RID Stride 0x0004
VF Device ID 0x5807
Page Sizes: 4096 (enabled), 8192, 65536, 262144,
1048576, 4194304
ecap 0017[200] = TPH Requester 1
netmap seems to activate on the onboard igb NICs.
# dmesg | grep -i netma
netmap: loaded module
igb0: netmap queues/slots: TX 4/1024, RX 4/1024
igb1: netmap queues/slots: TX 4/1024, RX 4/1024
# ifconfig cxl1
cxl1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=ec07bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,VLAN_HWTSO,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
ether 00:07:43:39:9d:b8
inet 10.151.10.1 netmask 0xffffff00 broadcast 10.151.10.255
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
media: Ethernet 10Gbase-Twinax <full-duplex>
status: active
plugged: SFP/SFP+/SFP28 Unknown (Copper pigtail)
vendor: CISCO-TYCO PN: 1-2053783-2 SN: TED1605BGWC DATE: 2016-02-01
---Mike
--
-------------------
Mike Tancsa, tel +1 519 651 3400
Sentex Communications, mike@sentex.net
Providing Internet services since 1994 www.sentex.net
Cambridge, Ontario Canada http://www.tancsa.com/
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?93e10699-ecc7-c062-bf85-a26de0de9633>