Date: Mon, 20 Jan 2003 15:22:49 -0500 (EST) From: Setient <setient@reva.sixgirls.org> To: freebsd-alpha@freebsd.org Subject: Re: 433au Message-ID: <Pine.NEB.4.51.0301201521090.18498@reva.sixgirls.org> In-Reply-To: <20030120163746.GA72385@just.puresimplicity.net> References: <Pine.NEB.4.51.0301200348430.13424@reva.sixgirls.org> <20030120090000.GA71173@just.puresimplicity.net> <Pine.NEB.4.51.0301200433540.13659@reva.sixgirls.org> <20030120163746.GA72385@just.puresimplicity.net>
next in thread | previous in thread | raw e-mail | index | archive | help
it kinda freezes on me that is the problem and X will not work with the card that is in there which is a Jan 20 03:54:12 ekleptex /kernel: pci0: <Cirrus Logic GD5430 SVGA controller> at 11.0 Jan 20 03:54:12 ekleptex /kernel: pci0: <unknown card> (vendor=0x1091, dev=0x00e4) at 12.0 irq 8 On Mon, 20 Jan 2003, Josh Tolbert wrote: > Date: Mon, 20 Jan 2003 10:37:46 -0600 > From: Josh Tolbert <hemi@puresimplicity.net> > To: Setient <setient@reva.sixgirls.org> > Subject: Re: 433au > > Hi, > > On Mon, Jan 20, 2003 at 04:34:31AM -0500, Setient wrote: > > i had umm issues with booting while it was in there it kept freezing is > > oyur pc164lx newer? mine is a pci version btw and did you have to do > > anything freaky to the srm? > > On Mon, 20 Jan 2003, Josh Tolbert wrote: > > > > > Date: Mon, 20 Jan 2003 03:00:00 -0600 > > > From: Josh Tolbert <hemi@puresimplicity.net> > > > To: Setient <setient@reva.sixgirls.org> > > > Subject: Re: 433au > > > > > > Hi, > > > > > > On Mon, Jan 20, 2003 at 03:49:01AM -0500, Setient wrote: > > > > will a 433 au support a pci 3dfx voodoo 3 2000 card? > > > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > > > with "unsubscribe freebsd-alpha" in the body of the message > > > > > > My PC164LX supports that exact card quite nicely, so I'd assume your 433au would as well. > > > DRI doesn't work yet, but I've been pestering anholt about it. The big hold-up is GLide. > > > > > > Thanks, > > > Josh > > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > with "unsubscribe freebsd-alpha" in the body of the message > > No, not a problem whatsoever. FWIW, an ATI Rage Pro PCI, Matrox Millennium II and just about any other PCI card I've thrown at the PC164LX have worked fine. I haven't had to do anything odd to the SRM, either. One thing that annoys me is if I shut the machine off I generally have to turn it off and on two or three times to get it going, but once it's running again everything works fine. > > Thanks, > Josh > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-alpha" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.NEB.4.51.0301201521090.18498>