Date: Sun, 23 Nov 2003 19:40:21 -0800 (PST) From: Dan Roberts <droberts@gwis.com> To: freebsd-bugs@FreeBSD.org Subject: Re: kern/54549: panic on install on Dell 600sc (fwd) Message-ID: <200311240340.hAO3eLjE031866@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
The following reply was made to PR kern/54549; it has been noted by GNATS.
From: Dan Roberts <droberts@gwis.com>
To: freebsd-gnats-submit@FreeBSD.org, kyle@stdio.com,
Kris Kennaway <kris@obsecurity.org>
Cc:
Subject: Re: kern/54549: panic on install on Dell 600sc (fwd)
Date: Sun, 23 Nov 2003 22:31:27 -0500 (EST)
Sorry for misspeaking.. didn't read far enough. I just now
stumbled upon the remote GDB feature. It'll take a while before
I get that done, but in the meantime, here is the full output of
the the device probe and subsequent error:
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.1-RELEASE #0: Thu Jun 5 02:55:42 GMT 2003
root@wv1u.btc.adaptec.com:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0b0c000.
Preloaded mfs_root "/boot/mfsroot" at 0xc0b0c204.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0b0c248.
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 2399335008 Hz
CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz (2399.34-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf27 Stepping = 7
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,>
real memory = 134152192 (127 MB)
avail memory = 118632448 (113 MB)
Pentium Pro MTRR support enabled
md0: Preloaded image </boot/mfsroot> 4423680 bytes at 0xc06877a4
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <DELL PE600SC > on motherboard
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-safe" frequency 3579545 Hz
pcibios: BIOS version 2.10
Using $PIR table, 7 entries at 0xc00fc320
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_cpu1: <CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
pci0: <ACPI PCI bus> on pcib0
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.5.31> port 0xecc0-0xecf0
em0: Speed:N/A Duplex:N/A
twe0: <3ware Storage Controller> port 0xecb0-0xecbf mem 0xfe000000-0xfe7fffff,00
twe0: 2 ports, Firmware FE7X 1.05.00.050, BIOS BE7X 1.08.00.046
sis0: <NatSemi DP83815 10/100BaseTX> port 0xe800-0xe8ff mem 0xfe922000-0xfe922f0
sis0: Ethernet address: 00:a0:cc:79:73:c9
miibus0: <MII bus> on sis0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: <display, VGA> at device 8.0 (no driver attached)
atapci0: <ServerWorks CSB6 UDMA66 controller> port 0x900-0x90f,0x36c-0x36f,0x160
ata2: at 0x1e8 on atapci0
ata3: simplex device, DMA on primary only
ata3: at 0x168 on atapci0
atapci1: <ServerWorks CSB6 UDMA100 controller> port 0x8b0-0x8bf,0x374-0x377,0x10
ata0: at 0x1f0 irq 14 on atapci1
ata1: at 0x170 irq 15 on atapci1
ohci0: <OHCI (generic) USB controller> mem 0xfe920000-0xfe920fff irq 3 at devic0
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
isab0: <PCI-ISA bridge> at device 15.3 on pci0
isa0: <ISA bus> on isab0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3 sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A, console
ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 1 on acpi0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
orm0: <Option ROMs> at iomem 0xec000-0xeffff,0xc8000-0xc8fff,0xc0000-0xc7fff on0pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
Fatal trap 12: page fault while in kernel mode
fault virtual address = 0x20
fault code = supervisor read, page not present
instruction pointer = 0x8:0xc01bf255
stack pointer = 0x10:0xc8805cc8
frame pointer = 0x10:0xc8805ce0
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, def32 1, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 25 (irq11: atapci0)
trap number = 12
panic: page fault
syncing disks, buffers remaining...
done
Uptime: 1s
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200311240340.hAO3eLjE031866>