Date: Sun, 11 Apr 1999 19:26:49 +0100 (BST) From: Doug Rabson <dfr@nlsystems.com> To: Hidetoshi Shimokawa <simokawa@sat.t.u-tokyo.ac.jp> Cc: gallatin@cs.duke.edu, freebsd-alpha@FreeBSD.ORG, obrien@NUXI.com Subject: Re: EGCS and Alpha builds Message-ID: <Pine.BSF.4.05.9904111926110.74823-100000@herring.nlsystems.com> In-Reply-To: <14093.49624.806904.69287I@ett.sat.t.u-tokyo.ac.jp>
next in thread | previous in thread | raw e-mail | index | archive | help
On Fri, 9 Apr 1999, Hidetoshi Shimokawa wrote: > At Thu, 8 Apr 1999 16:37:21 -0400 (EDT), > Andrew Gallatin <gallatin@cs.duke.edu> wrote: > > > > > > Hidetoshi Shimokawa writes: > > > At Thu, 08 Apr 1999 10:28:04 +0900, > > > Hidetoshi Shimokawa <simokawa@sat.t.u-tokyo.ac.jp> wrote: > > > > > > > > Hi, > > > > > > > > I have finally finished make world on alpha with egcs. > > > > Here is a fix. > > > > > > I have nasty problem with "make", which sometimes gets signal 11. > > > There may be some problem with libc.so. A workaround is to add > > > 'NOSHARED=YES' to /usr/src/usr.bin/make/Makefile. > > > > > > I don't know why... > > > > For what its worth, I've just survived 2 'make buildworld && make > > installworld; reboot' ... cycles without make crashing. I've also > > build a kernel from a clean compile directory (and checked in a quick > > fix for fp_emulate.c to get it building again under egcs). This is on > > a 500Mhz 21264 (I'm working on support for the xp1000). > > Good to hear it. > > > Is there anything in particular you need to do to cause make to crash? > > It turns out due to over clocking... > After change the clock from 666MHz to normal 600MHz, I can finish the > make world without crash. > (I changed SCSI card, removed video card and installed other PCI card > at the same time but they must not be the reason of the problem.) > > Sorry to bother you folks. > > Anyway, I think egcs on alpha fair enough now. I have done a few -j8 buildworlds now without problem too. > > I'm going to make world/kernel with '-Os -mcpu=ev56'. That might be interesting.. -- Doug Rabson Mail: dfr@nlsystems.com Nonlinear Systems Ltd. Phone: +44 181 442 9037 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-alpha" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.05.9904111926110.74823-100000>