Date: Fri, 15 Jun 2007 08:28:16 -0500 (CDT) From: mrspock@esfm.ipn.mx To: "Kevin Downey" <redchin@gmail.com> Cc: freebsd-questions@freebsd.org Subject: Re: beryl/agpgart/i810/Intel 950 GMA Message-ID: <1073.189.142.9.240.1181914096.squirrel@mail.esfm.ipn.mx> In-Reply-To: <1d3ed48c0706141121u1997a58bodb81c1e3cd617588@mail.gmail.com> References: <20070613203225.A10064@Gina.esfm.ipn.mx> <46713E55.4050403@cs.okstate.edu> <1d3ed48c0706140932m6870e41fsb13bf052de07efd4@mail.gmail.com> <46716F58.3060800@cs.okstate.edu> <1d3ed48c0706141121u1997a58bodb81c1e3cd617588@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Thank you, guys. My system has been updated to 6.2-STABLE and now I can see my /dev/agpgart perfectly. I think it is important to notice that 6.2-RELEASE does not handle my video card: 950 GMA. Thank you Reid, thanks list. Eduardo. > On 6/14/07, Reid Linnemann <lreid@cs.okstate.edu> wrote: >> Written by Kevin Downey on 06/14/07 11:32>> >> > On 6/14/07, Reid Linnemann <lreid@cs.okstate.edu> wrote: >> >> Written by Eduardo Viruena Silva on 06/13/07 21:07>> >> >> > >> >> > Hello Guys, >> >> > >> >> > I have an Intel 950 GMA video card, >> >> > built-in in my computer's motherboard. >> >> > My motherboard is D945NT. >> >> > >> >> > I installed FreeBSD-6.2-RELEASE, and cvsupdated >> >> > it to FreeBSD-6.2-RELEASE-p5. >> >> > >> >> > Installed my ports and cvsupdated them. >> >> > >> >> > I found "beryl" in /usr/ports/x11-wm, it >> >> > seemed to depend on Xorg-7.2 >> >> > >> >> > I successfully upgrade Xorg-6.9 to Xorg-7.2. >> >> > I also compiled beryl, everything seems to be ok. >> >> > >> >> > ..and I have tried to make it work, I give up. >> >> > >> >> > The problem seems to be that X is >> >> > trying to find /dev/agpgart, according >> >> > to my /var/log/Xorg.0.log: >> >> > >> >> > (II) I810(0): VESA VBE OEM Vendor: Intel Corporation >> >> > (II) I810(0): VESA VBE OEM Product: Intel(r) 82945G Chipset Family >> >> > Graphics Controller >> >> > (II) I810(0): VESA VBE OEM Product Rev: Hardware Version 0.0 >> >> > (II) I810(0): Integrated Graphics Chipset: Intel(R) 945G >> >> > (--) I810(0): Chipset: "945G" >> >> > (--) I810(0): Linear framebuffer at 0x40000000 >> >> > (--) I810(0): IO registers at addr 0x50100000 >> >> > (==) I810(0): Write-combining range (0x50100000,0x80000) was >> already >> >> clear >> >> > (II) I810(0): 2 display pipes available. >> >> > (II) I810(0): detected 7932 kB stolen memory. >> >> > (EE) GARTInit: Unable to open /dev/agpgart (No such file or >> directory) >> >> > (WW) I810(0): /dev/agpgart is either not available, or no memory is >> >> > available >> >> > for allocation. Using pre-allocated memory only. >> >> > (--) I810(0): Pre-allocated VideoRAM: 7932 kByte >> >> > >> >> > I have seen beryl working on Gentoo Linux, >> >> > /dev/agpgart is present in an identical system, >> >> > and it seems to me that it is not a problem >> >> > of memory allocation. >> >> > >> >> > so... >> >> > >> >> > What do I have to do to create /dev/agpgart? >> >> > >> >> > My kernel has >> >> > >> >> > device agp >> >> > >> >> > present. >> >> > >> >> > Thank you in advance. >> >> > >> >> > Eduardo. >> >> > >> >> > _______________________________________________ >> >> > freebsd-questions@freebsd.org mailing list >> >> > http://lists.freebsd.org/mailman/listinfo/freebsd-questions >> >> > To unsubscribe, send any mail to >> >> > "freebsd-questions-unsubscribe@freebsd.org" >> >> >> >> It looks to me like you don't have working dri/drm. You have to have >> >> direct rendering working before you can get beryl working. AFAIK, drm >> >> support for your chipset is not available in 6.1-RELEASE, and the drm >> >> module is what provides the agpgart device. >> >> >> >> sys/dev/drm/drm_pciids.h on 6-STABLE from about February shows this: >> >> >> >> #define i915_PCI_IDS \ >> >> {0x8086, 0x3577, 0, "Intel i830M GMCH"}, \ >> >> {0x8086, 0x2562, 0, "Intel i845G GMCH"}, \ >> >> {0x8086, 0x3582, 0, "Intel i852GM/i855GM GMCH"}, \ >> >> {0x8086, 0x2572, 0, "Intel i865G GMCH"}, \ >> >> {0x8086, 0x2582, 0, "Intel i915G"}, \ >> >> {0x8086, 0x2592, 0, "Intel i915GM"}, \ >> >> {0x8086, 0x2772, 0, "Intel i945G"}, \ >> >> {0x8086, 0x27A2, 0, "Intel i945GM"}, \ >> >> {0, 0, 0, NULL} >> >> >> >> So you have to have the i915 module loaded to use this chipset. >> Though >> >> the i915 driver was ported for 6.1-RELEASE there was no Makefile >> >> included, and it never really worked until after 6.2-RELEASE. >> >> Personally, I'm tracking 6-STABLE and I've had drm working with an >> i845G >> >> since February of this year when anholt MFC'd a load of i915 drm >> >> changes. See this log for more info: >> > >> > http://anholt.livejournal.com/34566.html >> > in an email on may 19th anholt indicated that there is no working >> > support for the 965G >> > >> >> Thanks for the link to anholt's journal. This doesn't affect the 945G, >> though, right? >> > > Truth is best determined by examination of reality. If your 945G is > working then I would say it is unaffected. > > -- > i'll unhook my oily pink mini-kimono, you kill him in honolulu -- > www.thelastcitadel.com > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to > "freebsd-questions-unsubscribe@freebsd.org" >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1073.189.142.9.240.1181914096.squirrel>