Date: Tue, 18 Sep 2001 11:35:53 +0300 (EEST) From: Olexander Kunytsa <kunia@istc.kiev.ua> To: <current@freebsd.org> Subject: problems with floppy Message-ID: <Pine.LNX.4.33.0109181135320.29554-100000@wolf.istc.kiev.ua>
next in thread | raw e-mail | index | archive | help
My floppy fails to probe for about last 2 weeks. It worked early
with my current-box, and it works on windoze.
dmesg of my mashine:
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #1: Sun Sep 9 17:07:13 EEST 2001
root@enigma.x-telecom.net:/usr/obj/usr/src/sys/CURRENT
Timecounter "i8254" frequency 1193346 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (501.21-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x665 Stepping = 5
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 134152192 (131008K bytes)
avail memory = 126377984 (123416K bytes)
Preloaded elf kernel "kernel" at 0xc0408000.
Preloaded elf module "snd_es137x.ko" at 0xc040809c.
Preloaded elf module "snd_pcm.ko" at 0xc0408140.
Pentium Pro MTRR support enabled
VESA: v3.0, 4096k memory, flags:0x1, mode table:0xc036e402 (1000022)
VESA: NVidia
Using $PIR table, 7 entries at 0xc00fdf00
apm0: <APM BIOS> on motherboard
apm0: found APM BIOS v1.2, connected at v1.2
acpi0: <soltek AWRDACPI> on motherboard
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI" frequency 3579545 Hz
can't fetch resources for \\_SB_.PCI0.ISA_.FDC0 - AE_AML_UNINITIALIZED_LOCAL
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_tz0: <thermal zone> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_pcib0: <Host-PCI bridge> port 0x5000-0x500f,0x4000-0x4041,0xcf8-0xcff on acpi0
pci0: <PCI bus> on acpi_pcib0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xf000-0xf00f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xe000-0xe01f irq 10 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
intpm0: <Intel 82371AB Power management controller> port 0x5000-0x500f irq 9 at device 7.3 on pci0
intpm0: I/O mapped 5000
intpm0: intr IRQ 9 enabled revision 0
smbus0: <System Management Bus> on intsmb0
smb0: <SMBus general purpose I/O> on smbus0
intpm0: PM I/O mapped 4000
pcm0: <AudioPCI ES1373-8> port 0xe400-0xe43f irq 9 at device 9.0 on pci0
rl0: <RealTek 8139 10/100BaseTX> port 0xe800-0xe8ff mem 0xd4800000-0xd48000ff irq 9 at device 10.0 on pci0
rl0: Realtek 8139B detected. Warning, this may be unstable in autoselect mode
rl0: Ethernet address: 00:00:21:fa:e4:be
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
atspeaker0 port 0x61 on acpi0
fdc0: cannot reserve I/O port range (1 ports)
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
fdc0: cannot reserve I/O port range (1 ports)
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
npx0: <math processor> on motherboard
npx0: INT 16 interface
orm0: <Option ROM> at iomem 0xc0000-0xcffff on isa0
fdc0: cannot reserve I/O port range (6 ports)
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
linprocfs registered
acpi_cpu0: set speed to 100.0%
acpi_cpu: CPU throttling enabled, 2 steps from 100% to 50.0%
ad0: DMA limited to UDMA33, non-ATA66 compliant cable
ad0: 9773MB <FUJITSU MPE3102AT> [19857/16/63] at ata0-master UDMA33
ad2: 26105MB <WDC WD273BA> [53040/16/63] at ata1-master UDMA33
acd0: CD-RW <YAMAHA CRW8424E> at ata0-slave PIO4
acd1: CDROM <CREATIVE CD5230E> at ata1-slave PIO4
Mounting root from ufs:/dev/ad0s3a
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.LNX.4.33.0109181135320.29554-100000>