Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 22 Sep 2009 09:16:44 +0200
From:      Hans Petter Selasky <hselasky@c2i.net>
To:        "Pierre-Luc Drouin" <pldrouin@pldrouin.net>
Cc:        ed@freebsd.org, freebsd-usb@freebsd.org
Subject:   Re: usb/138659: uftdi driver broken in RELENG_8/CURRENT
Message-ID:  <200909220916.46186.hselasky@c2i.net>
In-Reply-To: <4AB7CCE0.2000703@pldrouin.net>
References:  <4AB6DA79.7050209@pldrouin.net> <200909212045.20657.hselasky@c2i.net> <4AB7CCE0.2000703@pldrouin.net>

next in thread | previous in thread | raw e-mail | index | archive | help
On Monday 21 September 2009 20:58:40 Pierre-Luc Drouin wrote:
> Hans Petter Selasky wrote:
> > On Monday 21 September 2009 20:28:58 Pierre-Luc Drouin wrote:
> >> Hans Petter Selasky wrote:
> >>> On Monday 21 September 2009 19:52:13 Pierre-Luc Drouin wrote:
> >>>> Hans Petter Selasky wrote:
> >>>>> On Monday 21 September 2009 19:29:10 Pierre-Luc Drouin wrote:
> >>>>>> Hans Petter Selasky wrote:
> >>>>>>> On Monday 21 September 2009 03:44:25 Pierre-Luc Drouin wrote:
> >>>>>>>> Hi,
> >>>>>>>>
> >>>>>>>> I am also having troubles with the uftdi driver on 8.0-BETA4.
> >>>>>>>> I am trying to use a fan controller (mCubed bigNG) that uses a
> >>>>>>>> FT232BL chip and it does not seem to be responding on FreeBSD 8.0
> >>>>>>>> while the same code works perfectly on Linux (I have not tried the
> >>>>>>>> code on RELENG_7 yet but I could install it if necessary).
> >>>>>>>>
> >>>>>>>> Here is the very simple code I am using for testing:
> >>>>>>>> #include <termios.h>
> >>>>>>>> #include <fcntl.h>
> >>>>>>>> #include <string.h>
> >>>>>>>> #include <unistd.h>
> >>>>>>>> #include <stdio.h>
> >>>>>>>>
> >>>>>>>> int main();
> >>>>>>>>
> >>>>>>>> #define DEV "/dev/ttyU0"
> >>>>>>>>
> >>>>>>>> #define TBAN_SER_SOURCE1        0x05 /* Primary source */
> >>>>>>>> #define TBAN_SER_SOURCE2        0x06 /* Alternative source
> >>>>>>>> (miniNG...) */
> >>>>>>>>
> >>>>>>>> #define TBAN_SER_REQUEST        0x36
> >>>>>>>>
> >>>>>>>> int main()
> >>>>>>>> {
> >>>>>>>>   int fd;
> >>>>>>>>   int result;
> >>>>>>>>   struct termios oldtio, newtio;
> >>>>>>>>   unsigned char buf[285];
> >>>>>>>>
> >>>>>>>>   printf("Opening device\n");
> >>>>>>>>   fd=open(DEV, O_RDWR | O_NOCTTY);
> >>>>>>>>
> >>>>>>>>   if(fd<0) {
> >>>>>>>>     perror(DEV);
> >>>>>>>>     return 1;
> >>>>>>>>   }
> >>>>>>>>
> >>>>>>>>   result=tcgetattr(fd,&oldtio);
> >>>>>>>>   if(result<0) {
> >>>>>>>>     perror("tcgetattr");
> >>>>>>>>     return 1;
> >>>>>>>>   }
> >>>>>>>>
> >>>>>>>>   memcpy(&newtio,&oldtio,sizeof(struct termios));
> >>>>>>>>   newtio.c_cflag = B19200
> >>>>>>>>
> >>>>>>>>     | CRTSCTS
> >>>>>>>>     | CS8
> >>>>>>>>     | CREAD;
> >>>>>>>>
> >>>>>>>>   newtio.c_iflag     = IGNPAR;
> >>>>>>>>   newtio.c_oflag     = 0;
> >>>>>>>>   newtio.c_lflag     = 0;
> >>>>>>>>   newtio.c_cc[VMIN]  = 1;
> >>>>>>>>   newtio.c_cc[VTIME] = 0;
> >>>>>>>>
> >>>>>>>>   result=tcflush(fd, TCIFLUSH);
> >>>>>>>>   if(result<0) {
> >>>>>>>>     perror("tcflush");
> >>>>>>>>     return 1;
> >>>>>>>>   }
> >>>>>>>>
> >>>>>>>>   result=tcsetattr(fd,TCSANOW,&newtio);
> >>>>>>>>   if(result<0) {
> >>>>>>>>     perror("tcsetattr");
> >>>>>>>>     return 1;
> >>>>>>>>   }
> >>>>>>>>
> >>>>>>>>   sleep(1);
> >>>>>>>>
> >>>>>>>>   printf("Performing initial query\n");
> >>>>>>>>   buf[0]=TBAN_SER_SOURCE1;
> >>>>>>>>   buf[1]=TBAN_SER_REQUEST;
> >>>>>>>>
> >>>>>>>>   printf("Requesting status\n");
> >>>>>>>>   result=write(fd,buf,2);
> >>>>>>>>   if(result<0) {
> >>>>>>>>     perror("write");
> >>>>>>>>     return 1;
> >>>>>>>>   }
> >>>>>>>>
> >>>>>>>>   sleep(1);
> >>>>>>>>
> >>>>>>>>   printf("Reading status\n");
> >>>>>>>>   result=read(fd,buf,32);
> >>>>>>>>   if(result<0) {
> >>>>>>>>     perror("read");
> >>>>>>>>     return 1;
> >>>>>>>>   }
> >>>>>>>>
> >>>>>>>>   result=tcsetattr(fd,TCSANOW,&oldtio);
> >>>>>>>>   if(result<0) {
> >>>>>>>>     perror("tcsetattr");
> >>>>>>>>     return 1;
> >>>>>>>>   }
> >>>>>>>>
> >>>>>>>>   result=close(fd);
> >>>>>>>>   if(result<0) {
> >>>>>>>>     perror("close");
> >>>>>>>>     return 1;
> >>>>>>>>   }
> >>>>>>>>   return 0;
> >>>>>>>> }
> >>>>>>>>
> >>>>>>>> It hangs while reading independently of the number of bits I am
> >>>>>>>> reading.
> >>>>>>>>
> >>>>>>>> Here is the output from dmesg when I load the uftdi module:
> >>>>>>>> Sep 20 21:31:31 ldaemon kernel: uftdi0: <USB - Serial> on usbus6
> >>>>>>>> Sep 20 21:31:31 ldaemon kernel: ucom_attach_tty:317: tp =
> >>>>>>>> 0xffffff001f12b400, unit = 0 Sep 20 21:31:31 ldaemon kernel:
> >>>>>>>> ucom_attach_tty:346: ttycreate: U0 Sep 20 21:31:34 ldaemon root:
> >>>>>>>> Unknown USB device: vendor 0x051d product 0x0002 bus uhub0
> >>>>>>>>
> >>>>>>>> Here is the output in /var/log/messages when I enable the debug
> >>>>>>>> output for ucom and uftdi: Sep 20 21:33:30 ldaemon kernel:
> >>>>>>>> ucom_open:554: tp = 0xffffff001f12b400 Sep 20 21:33:30 ldaemon
> >>>>>>>> kernel: ucom_dtr:827: onoff = 1 Sep 20 21:33:30 ldaemon kernel:
> >>>>>>>> ucom_line_state:799: on=0x01, off=0x00 Sep 20 21:33:30 ldaemon
> >>>>>>>> kernel: ucom_rts:838: onoff = 1
> >>>>>>>> Sep 20 21:33:30 ldaemon kernel: ucom_line_state:799: on=0x02,
> >>>>>>>> off=0x00 Sep 20 21:33:30 ldaemon kernel: ucom_break:816: onoff = 0
> >>>>>>>> Sep 20 21:33:30 ldaemon kernel: ucom_line_state:799: on=0x00,
> >>>>>>>> off=0x04 Sep 20 21:33:30 ldaemon kernel: ucom_status_change:901:
> >>>>>>>> Sep 20 21:33:30 ldaemon kernel: ucom_param:950: sc =
> >>>>>>>> 0xffffff001f12ac58 Sep 20 21:33:30 ldaemon kernel:
> >>>>>>>> uftdi_pre_param:653:
> >>>>>>>> Sep 20 21:33:30 ldaemon kernel: ucom_dtr:827: onoff = 1
> >>>>>>>> Sep 20 21:33:30 ldaemon kernel: ucom_line_state:799: on=0x01,
> >>>>>>>> off=0x00 Sep 20 21:33:30 ldaemon kernel: ucom_rts:838: onoff = 1
> >>>>>>>> Sep 20 21:33:30 ldaemon kernel: ucom_line_state:799: on=0x02,
> >>>>>>>> off=0x00 Sep 20 21:33:30 ldaemon kernel: ucom_cfg_open:520:
> >>>>>>>> Sep 20 21:33:30 ldaemon kernel: uftdi_cfg_open:354:
> >>>>>>>> Sep 20 21:33:30 ldaemon kernel: uftdi_read_callback:459: status
> >>>>>>>> change msr=0xf0 (0x00) lsr=0x60 (0x00) Sep 20 21:33:30 ldaemon
> >>>>>>>> kernel: ucom_status_change:901:
> >>>>>>>> Sep 20 21:33:30 ldaemon kernel: uftdi_cfg_get_status:705: msr=0xf0
> >>>>>>>> lsr=0x60 Sep 20 21:33:30 ldaemon kernel:
> >>>>>>>> ucom_cfg_status_change:887: DCD changed to 1 Sep 20 21:33:30
> >>>>>>>> ldaemon kernel:
> >>>>>>>> uftdi_cfg_param:672: Sep 20 21:33:30 ldaemon kernel:
> >>>>>>>> ucom_ioctl:653: cmd = 0x402c7413 Sep 20 21:33:30 ldaemon kernel:
> >>>>>>>> ucom_ioctl:653: cmd = 0x80047410 Sep 20 21:33:30 ldaemon kernel:
> >>>>>>>> ucom_ioctl:653: cmd = 0x802c7414 Sep 20 21:33:30 ldaemon kernel:
> >>>>>>>> ucom_param:950: sc = 0xffffff001f12ac58 Sep 20 21:33:30 ldaemon
> >>>>>>>> kernel:
> >>>>>>>> uftdi_pre_param:653:
> >>>>>>>> Sep 20 21:33:30 ldaemon kernel: uftdi_cfg_get_status:705: msr=0xf0
> >>>>>>>> lsr=0x60 Sep 20 21:33:30 ldaemon kernel: uftdi_cfg_param:672:
> >>>>>>>> Sep 20 21:33:30 ldaemon kernel: ucom_get_data:1064: cnt=0
> >>>>>>>> Sep 20 21:33:31 ldaemon kernel: ucom_ioctl:653: cmd = 0x80047410
> >>>>>>>> Sep 20 21:33:32 ldaemon kernel: ucom_outwakeup:1009: sc =
> >>>>>>>> 0xffffff001f12ac58 Sep 20 21:33:32 ldaemon kernel:
> >>>>>>>> ucom_get_data:1064: cnt=2
> >>>>>>>> Sep 20 21:33:32 ldaemon kernel: ucom_get_data:1064: cnt=0
> >>>>>>>>
> >>>>>>>> I really need to get this working so I am ready to test things as
> >>>>>>>> much as I can...
> >>>>>>>
> >>>>>>> Hi,
> >>>>>>>
> >>>>>>> You need to set raw mode for the TTY device I think. Maybe Ed can
> >>>>>>> give you the function name you need to call to do that?
> >>>>>>>
> >>>>>>> --HPS
> >>>>>>
> >>>>>> Do I need to do something like that?
> >>>>>> ioctl(fileno(stdin), TIOCGETP, &tty_org);
> >>>>>> tty = tty_org;
> >>>>>>
> >>>>>> /* set terminal to raw mode ... */
> >>>>>> tty.sg_flags |= CRMOD;
> >>>>>> tty.sg_flags &= ~ECHO;
> >>>>>> tty.sg_flags &= ~XTABS;
> >>>>>> tty.sg_flags |= RAW;
> >>>>>>
> >>>>>> Thanks!
> >>>>>> Pierre-Luc Drouin
> >>>>>
> >>>>> Hi,
> >>>>>
> >>>>> You need to call this function:
> >>>>>
> >>>>>      void
> >>>>>      cfmakeraw(struct termios *t);
> >>>>>
> >>>>> --HPS
> >>>>
> >>>> Hi,
> >>>>
> >>>> it still does not work. I have added the line
> >>>> cfmakeraw(&newtio);
> >>>>
> >>>> just before the call to tcflush and I get the following output in
> >>>> /var/log/messages:
> >>>> Sep 21 13:38:46 ldaemon kernel: ucom_open:554: tp = 0xffffff001f12b400
> >>>> Sep 21 13:38:46 ldaemon kernel: ucom_dtr:827: onoff = 1
> >>>> Sep 21 13:38:46 ldaemon kernel: ucom_line_state:799: on=0x01, off=0x00
> >>>> Sep 21 13:38:46 ldaemon kernel: ucom_rts:838: onoff = 1
> >>>> Sep 21 13:38:46 ldaemon kernel: ucom_line_state:799: on=0x02, off=0x00
> >>>> Sep 21 13:38:46 ldaemon kernel: ucom_break:816: onoff = 0
> >>>> Sep 21 13:38:46 ldaemon kernel: ucom_line_state:799: on=0x00, off=0x04
> >>>> Sep 21 13:38:46 ldaemon kernel: ucom_status_change:901:
> >>>> Sep 21 13:38:46 ldaemon kernel: ucom_param:950: sc =
> >>>> 0xffffff001f12ac58 Sep 21 13:38:46 ldaemon kernel:
> >>>> uftdi_pre_param:653:
> >>>> Sep 21 13:38:46 ldaemon kernel: ucom_dtr:827: onoff = 1
> >>>> Sep 21 13:38:46 ldaemon kernel: ucom_line_state:799: on=0x01, off=0x00
> >>>> Sep 21 13:38:46 ldaemon kernel: ucom_rts:838: onoff = 1
> >>>> Sep 21 13:38:46 ldaemon kernel: ucom_line_state:799: on=0x02, off=0x00
> >>>> Sep 21 13:38:46 ldaemon kernel: ucom_cfg_open:520:
> >>>> Sep 21 13:38:46 ldaemon kernel: uftdi_cfg_open:354:
> >>>> uftdi_cfg_get_status:705: msr=0xf0 lsr=0x60
> >>>> Sep 21 13:38:46 ldaemon kernel: ucom_cfg_status_change:887: DCD
> >>>> changed to 1 Sep 21 13:38:46 ldaemon kernel: uftdi_cfg_param:672:
> >>>> Sep 21 13:38:46 ldaemon kernel: ucom_ioctl:653: cmd = 0x402c7413
> >>>> Sep 21 13:38:46 ldaemon kernel: ucom_ioctl:653: cmd = 0x80047410
> >>>> Sep 21 13:38:46 ldaemon kernel: ucom_ioctl:653: cmd = 0x802c7414
> >>>> Sep 21 13:38:46 ldaemon kernel: ucom_param:950: sc =
> >>>> 0xffffff001f12ac58 Sep 21 13:38:46 ldaemon kernel:
> >>>> uftdi_pre_param:653:
> >>>> Sep 21 13:38:46 ldaemon kernel: uftdi_cfg_param:672:
> >>>> Sep 21 13:38:46 ldaemon kernel: ucom_get_data:1064: cnt=0
> >>>> Sep 21 13:38:47 ldaemon kernel: ucom_ioctl:653: cmd = 0x80047410
> >>>> Sep 21 13:38:48 ldaemon kernel: ucom_outwakeup:1009: sc =
> >>>> 0xffffff001f12ac58 Sep 21 13:38:48 ldaemon kernel: ucom_get_data:1064:
> >>>> cnt=2
> >>>> Sep 21 13:38:48 ldaemon kernel: ucom_get_data:1064: cnt=0
> >>>
> >>> Can you try adding a delay after setting the baud rate?
> >>>
> >>> --HPS
> >>
> >> The code already sleeps for 1 second after I applying the baud rate (via
> >> tcsetattr(fd,TCSANOW,&newtio)). I am not sure to understand what you
> >> mean...
> >
> > Hi,
> >
> > I mean try adding some:
> >
> > usleep(1000000);
> >
> > To your code to see if that changes anything.
> >
> > Also try reading one byte instead of 32.
> >
> > Last, try adding a printout to:
> >
> > src/sys/dev/usb/serial/uftdi.c
> >
> > uftdi_read_callback()
> >
> > and printout the actlen variable.
> >
> > --HPS
>
> ok, so I added the usleep statement right after the existing sleep
> statement. I also tried reading a single byte. It did not make any
> difference... I added a print statement to print the value of actlen
> right after it is set via
> usbd_xfer_status(xfer, &actlen, NULL, NULL, NULL);
>
> Here is the new output in /var/log/messages:
> Sep 21 14:55:28 ldaemon kernel: ucom_open:554: tp = 0xffffff0139488800
> Sep 21 14:55:28 ldaemon kernel: ucom_dtr:827: onoff = 1
> Sep 21 14:55:28 ldaemon kernel: ucom_line_state:799: on=0x01, off=0x00
> Sep 21 14:55:28 ldaemon kernel: ucom_rts:838: onoff = 1
> Sep 21 14:55:28 ldaemon kernel: ucom_line_state:799: on=0x02, off=0x00
> Sep 21 14:55:28 ldaemon kernel: ucom_break:816: onoff = 0
> Sep 21 14:55:28 ldaemon kernel: ucom_line_state:799: on=0x00, off=0x04
> Sep 21 14:55:28 ldaemon kernel: ucom_status_change:901:
> Sep 21 14:55:28 ldaemon kernel: ucom_param:950: sc = 0xffffff013bcac458
> Sep 21 14:55:28 ldaemon kernel: ucom_dtr:827: onoff = 1
> Sep 21 14:55:28 ldaemon kernel: ucom_line_state:799: on=0x01, off=0x00
> Sep 21 14:55:28 ldaemon kernel: ucom_rts:838: onoff = 1
> Sep 21 14:55:28 ldaemon kernel: ucom_line_state:799: on=0x02, off=0x00
> Sep 21 14:55:28 ldaemon kernel: ucom_cfg_open:520:
> Sep 21 14:55:28 ldaemon kernel: actlen is 0
> Sep 21 14:55:28 ldaemon kernel: actlen is 2
> Sep 21 14:55:28 ldaemon kernel: actlen is 2
> Sep 21 14:55:28 ldaemon kernel: ucom_cfg_status_change:887: DCD changed to
> 1 Sep 21 14:55:28 ldaemon kernel: ucom_ioctl:653: cmd = 0x402c7413
> Sep 21 14:55:28 ldaemon kernel: ucom_ioctl:653: cmd = 0x80047410
> Sep 21 14:55:28 ldaemon kernel: ucom_ioctl:653: cmd = 0x802c7414
> Sep 21 14:55:28 ldaemon kernel: ucom_param:950: sc = 0xffffff013bcac458
> Sep 21 14:55:28 ldaemon kernel: actlen is 2
> Sep 21 14:55:28 ldaemon last message repeated 12 times
> Sep 21 14:55:28 ldaemon kernel: ucom_get_data:1064: cnt=0
> Sep 21 14:55:28 ldaemon kernel: actlen is 2
> Sep 21 14:55:30 ldaemon last message repeated 111 times
> Sep 21 14:55:30 ldaemon kernel: ucom_ioctl:653: cmd = 0x80047410
> Sep 21 14:55:30 ldaemon kernel: actlen is 2
> Sep 21 14:55:31 ldaemon last message repeated 62 times
> Sep 21 14:55:31 ldaemon kernel: ucom_outwakeup:1009: sc =
> 0xffffff013bcac458 Sep 21 14:55:31 ldaemon kernel: ucom_get_data:1064:
> cnt=2
> Sep 21 14:55:31 ldaemon kernel: ucom_get_data:1064: cnt=0
> Sep 21 14:55:31 ldaemon kernel: actlen is 2

If actlen is 2 then no modem data is transferred from the device.

--HPS



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200909220916.46186.hselasky>