Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 15 Apr 2003 15:08:34 -0700
From:      "steven r. eastlake" <seastlake@gci.net>
To:        freebsd-questions@FreeBSD.ORG
Subject:   tech support
Message-ID:  <5.2.0.9.0.20030415144222.00a54120@mail.gci.net>

next in thread | raw e-mail | index | archive | help
i am setting up freebsd 5.0 and would like to attempt to "wake up" my 
generic sound
card and also wacom usb tablet mouse/pen

1. MAKEDEV not in /dev and not executable, found in /usr/src/etc, move to /,
     cannot move to /dev, then permission executable
2. MAKEDEV fails numerous ways attempting snd and uhid, review online dialogs
     for these failures and try to correct my problems to no avail
3. attempt mknod sndstat c 30 6 root:operator gives "no such file or 
directory", an error
     message i have seen previously

i suspect this may be an easy fix for those with knowledge...

following are setenv, dmesg, which may help...

thanks for support...

setenv setenv setenv setenv

TERM=cons25
PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/games:/usr/local/sbin:/usr/local/bin:/usr/X11R6/bin:/root/bin
MAIL=/var/mail/root
BLOCKSIZE=K
FTP_PASSIVE_MODE=YES
SHELL=/bin/csh
HOME=/root
LOGNAME=root
USER=root
HOSTTYPE=FreeBSD
VENDOR=intel
OSTYPE=FreeBSD
MACHTYPE=i386
SHLVL=1
PWD=/root
GROUP=wheel
HOST=
EDITOR=vi
PAGER=more

dmesg dmesg dmesg dmesg

Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
         The Regents of the University of California. All rights reserved.
FreeBSD 5.0-RELEASE #0: Wed Apr  9 16:40:57 AKDT 2003
     root@:/usr/src/sys/i386/compile/SREX
Preloaded elf kernel "/boot/kernel/kernel" at 0xc04a7000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc04a70a8.
Timecounter "i8254"  frequency 1193182 Hz
Timecounter "TSC"  frequency 900038103 Hz
CPU: AMD Athlon(tm) processor (900.04-MHz 686-class CPU)
   Origin = "AuthenticAMD"  Id = 0x642  Stepping = 2
   Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
   AMD Features=0xffffffffc0440000<RSVD,AMIE,DSP,3DNow!>
real memory  = 805240832 (767 MB)
avail memory = 777211904 (741 MB)
Initializing GEOMetry subsystem
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <VT8371 AWRDACPI> on motherboard
     ACPI-0625: *** Info: GPE Block0 defined as GPE0 to GPE15
Using $PIR table, 9 entries at 0xc00fdee0
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-fast"  frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 
0x6000-0x607f,0x5000-0x500f,0x4080-0x40ff,0x4000-0x407f,0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <VIA 82C8363 (Apollo KT133A) host to PCI bridge> mem 
0xe8000000-0xebffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA100 controller> port 0xd000-0xd00f at device 7.1 on 
pci0
atapci0: Correcting VIA config for southbridge data corruption bug
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 12 at device 7.2 
on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ums0: WACOM ET-0405A-UV2.0-3, rev 1.10/2.03, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
uhci1: <VIA 83C572 USB controller> port 0xd800-0xd81f irq 12 at device 7.3 
on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pci0: <bridge, PCI-unknown> at device 7.4 (no driver attached)
pci0: <serial bus, FireWire> at device 13.0 (no driver attached)
sio0: <3COM PCI FaxModem> port 0xe000-0xe007 irq 10 at device 15.0 on pci0
sio0: moving to sio4
sio4: type 16550A
pci0: <multimedia, audio> at device 17.0 (no driver attached)
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 
0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0 port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: IEEE1284 device found /NIBBLE
Probing for PnP devices on ppbus0:
ppbus0: <NEC SuperScript 150C (Monochrome)> PCL III+
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
orm0: <Option ROM> at iomem 0xc0000-0xca7ff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
acpi_cpu: CPU throttling enabled, 2 steps from 100% to 50.0%
ad0: 8063MB <FUJITSU MPD3084AT> [16383/16/63] at ata0-master UDMA66
ad2: 114473MB <WDC WD1200BB-00CAA0> [232581/16/63] at ata1-master UDMA100
ad3: 12971MB <WDC WD136AA-35BAA0> [26354/16/63] at ata1-slave UDMA66
acd0: CD-RW <SONY CD-RW CRX0811> at ata0-slave PIO4
Mounting root from ufs:/dev/ad3s1a 



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?5.2.0.9.0.20030415144222.00a54120>