Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 1 Jun 2017 16:53:17 +0200
From:      Raimo Niskanen <raimo+freebsd@erix.ericsson.se>
To:        <freebsd-questions@freebsd.org>
Subject:   Re: Advice on kernel panics
Message-ID:  <20170601145317.GE2256@erix.ericsson.se>
In-Reply-To: <20170601235447.C98304@sola.nimnet.asn.au>
References:  <mailman.103.1496318402.46813.freebsd-questions@freebsd.org> <20170601235447.C98304@sola.nimnet.asn.au>

Next in thread | Previous in thread | Raw E-Mail | Index | Archive | Help
On Fri, Jun 02, 2017 at 12:34:43AM +1000, Ian Smith wrote:
> In freebsd-questions Digest, Vol 678, Issue 4, Message: 4
> On Thu, 1 Jun 2017 10:27:49 +0200 Raimo Niskanen <raimo+freebsd@erix.ericsson.se> wrote:
>  > On Thu, Jun 01, 2017 at 12:10:30AM -0500, Doug McIntyre wrote:
>  > > On Mon, May 29, 2017 at 11:20:43AM +0200, Raimo Niskanen wrote:
>  > > > I have a server that panics about every 3 days and need some advice on how
>  > > > to handle that.
>  > > 
>  > > I'd expect it is some sort of hardware failure, as I would expect
>  > > kernel panics more on the order of once a decade with FreeBSD. Ie.
>  > > I've seen one or two on my hundred or so servers, but its pretty rare.
>  > > 
>  > > Check and recheck your hardware items. 
>  > 
>  > I have removed one of four memory capsules - panicked again.  Will rotate
>  > through all of them...
>  > 
>  > > 
>  > > Runup memtest86+. Check your drive hardware, turn on SMART checking.
>  > 
>  > I have run memtest86+ over night - no errors found.
>  > 
>  > I have installed smartmontools - no errors found, short and long self tests
>  > on both disks run fine.  zpool scrub repaired 0 errors and has no known data
>  > errors.
> 
> Everyone's suggesting hardware problems, and it's certainly worthwhile 
> eliminating that possibility - but this could be a software/OS issue.
> 
> If it were me and hardware all checks out, I'd try posting the original 
> report - plus other details about the box and setup that you've since 
> mentioned - to freebsd-stable@, or maybe freebsd-fs@ since those fstat 
> reports seem to point to possible FS/zfs issues? at a wild guess ..
> 
> One other hardware tester you might try is sysutils/stress which can 
> pound CPU, I/O, VM, disk as hard and for as long as you like, without 
> having to bring the box down.  I've used this lots to generate heavy 
> loads.  Keep a close eye on system temperatures during longer tests.

Worth a try.

> 
> Ah, just before posting, I see your latest with dmesg.  Just on a quick 
> scan, I wonder if these are a bad indication?  Maybe just a side-issue, 
> but powerd might not work, so again heat might be something to watch:
> 
>  est0: <Enhanced SpeedStep Frequency Control> on cpu0
>  est: CPU supports Enhanced Speedstep, but is not recognized.

This I will definitely look into!

> 
> cheers, Ian

-- 

/ Raimo Niskanen, Erlang/OTP, Ericsson AB



Want to link to this message? Use this URL: <http://docs.FreeBSD.org/cgi/mid.cgi?20170601145317.GE2256>