Date: Mon, 30 Apr 2001 02:55:06 -0700 From: Mike Smith <msmith@freebsd.org> To: "Hartmann, O." <ohartman@klima.physik.uni-mainz.de> Cc: freebsd-smp@freebsd.org, freebsd-stable@freebsd.org Subject: Re: Unknown PCI device on TYAN Thunder 2500 w. AMI MegaRAID Message-ID: <200104300955.f3U9t7808786@mass.dis.org> In-Reply-To: Your message of "Mon, 30 Apr 2001 11:15:28 %2B0200." <Pine.BSF.4.33.0104301108160.88611-100000@klima.physik.uni-mainz.de>
next in thread | previous in thread | raw e-mail | index | archive | help
> Dear Sirs.
>
> Yesterday I posted a message about spontanous reboots on one of our
> TYAN 2500 based SMP machines. In one respind I was told that there is
> an unknown PCI device and I see, he was right.
>
> The unknown PCI device belongs to Q-Logic - and that is the vendor
> of the SCSI chipset on the AMI MegaRAID Enterprise 1600 we use.
This is harmless; it's a feature of the transparent PCI bridge used on
the Megaraid. Ignore the device; it's owned by the RAID controller.
> Here is the dmesg-output:
>
> opyright (c) 1992-2001 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> The Regents of the University of California. All rights reserved.
> FreeBSD 4.3-STABLE #76: Mon Apr 30 10:51:10 CEST 2001
> root@atmos.physik.uni-mainz.de:/usr/obj/usr/src/sys/ATMOS
> Timecounter "i8254" frequency 1193182 Hz
> CPU: Pentium III/Pentium III Xeon/Celeron (868.64-MHz 686-class CPU)
> Origin = "GenuineIntel" Id = 0x683 Stepping = 3
> Features=0x387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE>
> real memory = 2147483648 (2097152K bytes)
> avail memory = 2088067072 (2039128K bytes)
> Programming 16 pins in IOAPIC #0
> IOAPIC #0 intpin 2 -> irq 0
> Programming 16 pins in IOAPIC #1
> FreeBSD/SMP: Multiprocessor motherboard
> cpu0 (BSP): apic id: 1, version: 0x00040011, at 0xfee00000
> cpu1 (AP): apic id: 0, version: 0x00040011, at 0xfee00000
> io0 (APIC): apic id: 2, version: 0x000f0011, at 0xfec00000
> io1 (APIC): apic id: 3, version: 0x000f0011, at 0xfec01000
> Preloaded elf kernel "kernel" at 0xc0383000.
> Pentium Pro MTRR support enabled
> npx0: <math processor> on motherboard
> npx0: INT 16 interface
> pcib0: <Host to PCI bridge> on motherboard
> IOAPIC #1 intpin 13 -> irq 2
> IOAPIC #1 intpin 12 -> irq 16
> IOAPIC #1 intpin 7 -> irq 17
> pci0: <PCI bus> on pcib0
> pcib3: <PCI to PCI bridge (vendor=1166 device=0005)> at device 0.1 on pci0
> IOAPIC #1 intpin 1 -> irq 18
> pci1: <PCI bus> on pcib3
> pci1: <NVidia Riva TNT2 graphics accelerator> at 0.0 irq 18
> sym0: <896> port 0xf800-0xf8ff mem 0xfeafe000-0xfeafffff,0xfeafac00-0xfeafafff irq 2 at device 1.0 on pci0
> sym0: Symbios NVRAM, ID 7, Fast-40, LVD, parity checking
> sym0: open drain IRQ line driver, using on-chip SRAM
> sym0: using LOAD/STORE-based firmware.
> sym0: handling phase mismatch from SCRIPTS.
> sym1: <896> port 0xf400-0xf4ff mem 0xfeafc000-0xfeafdfff,0xfeafa800-0xfeafabff irq 16 at device 1.1 on pci0
> sym1: Symbios NVRAM, ID 7, Fast-40, SE, parity checking
> sym1: open drain IRQ line driver, using on-chip SRAM
> sym1: using LOAD/STORE-based firmware.
> sym1: handling phase mismatch from SCRIPTS.
> pcib5: <DEC 21154 PCI-PCI bridge> at device 3.0 on pci0
> IOAPIC #1 intpin 2 -> irq 19
> pci2: <PCI bus> on pcib5
> pcib6: <DEC 21154 PCI-PCI bridge> at device 0.0 on pci2
> IOAPIC #1 intpin 0 -> irq 20
> pci3: <PCI bus> on pcib6
> amr0: <AMI MegaRAID> mem 0xf4000000-0xf7ffffff irq 20 at device 0.0 on pci3
> amr0: <Series 471 40 Logical Drive Firmware> Firmware C158, BIOS 3.11, 64MB RAM
>
> ===>> pci2: <unknown card> (vendor=0x1077, dev=0x1216) at 1.0 irq 18
> ===>> pci2: <unknown card> (vendor=0x1077, dev=0x1216) at 2.0 irq 19
>
> fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xfcc0-0xfcff mem 0xfe900000-0xfe9fffff,0xfeaf9000-0xfeaf9fff irq 17 at device 7.0 on pci0
> fxp0: Ethernet address 00:e0:81:00:f0:d7
> isab0: <ServerWorks IB6566 PCI to ISA bridge> at device 15.0 on pci0
> isa0: <ISA bus> on isab0
> pci0: <Unknown PCI ATA controller> at 15.1
> pcib1: <ServerWorks NB6536 2.0HE host to PCI bridge> on motherboard
> pci4: <PCI bus> on pcib1
> pcib2: <ServerWorks host to PCI bridge> on motherboard
> pci5: <PCI bus> on pcib2
> pcib4: <ServerWorks host to PCI bridge> on motherboard
> pci6: <PCI bus> on pcib4
> atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> kbd0 at atkbd0
> psm0: <PS/2 Mouse> irq 12 on atkbdc0
> psm0: model IntelliMouse, device ID 3
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> sc0: <System console> on isa0
> sc0: VGA <8 virtual consoles, flags=0x200>
> fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
> fdc0: FIFO enabled, 8 bytes threshold
> fd0: <1440-KB 3.5" drive> on fdc0 drive 0
> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
> sio0: type 16550A
> sio1 at port 0x2f8-0x2ff irq 3 flags 0x10 on isa0
> sio1: type 16550A
> ppc0: <Parallel port> at port 0x378-0x37f irq 7 drq 1 flags 0x8 on isa0
> ppc0: SMC-like chipset (ECP-only) in ECP mode
> ppc0: FIFO with 16/16/8 bytes threshold
> lpt0: <Printer> on ppbus0
> lpt0: Interrupt-driven port
> APIC_IO: Testing 8254 interrupt delivery
> APIC_IO: Broken MP table detected: 8254 is not connected to IOAPIC #0 intpin 2
> APIC_IO: routing 8254 via 8259 and IOAPIC #0 intpin 0
> DUMMYNET initialized (010124)
> IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to deny, unlimited logging
> IPsec: Initialized Security Association Processing.
> Waiting 4 seconds for SCSI devices to settle
> (noperiph:sym0:0:-1:-1): SCSI BUS reset delivered.
> (noperiph:sym1:0:-1:-1): SCSI BUS reset delivered.
> amrd0: <MegaRAID logical drive> on amr0
> amrd0: 245014MB (501788672 sectors) RAID 5 (optimal)
> SMP: AP CPU #1 Launched!
> sa0 at sym1 bus 0 target 5 lun 0
> sa0: <HP C5713A H910> Removable Sequential Access SCSI-2 device
> sa0: 40.000MB/s transfers (20.000MHz, offset 31, 16bit)
> no devsw (majdev=0 bootdev=0xa0200000)
> Mounting root from ufs:/dev/amrd0s1a
> cd0 at sym1 bus 0 target 3 lun 0
> cd0: <TEAC CD-ROM CD-532S 1.0A> Removable CD-ROM SCSI-2 device
> cd0: 20.000MB/s transfers (20.000MHz, offset 16)
> cd0: cd present [329963 x 2048 byte records]
> ch0 at sym1 bus 0 target 5 lun 1
> ch0: <HP C5713A H910> Removable Changer SCSI-2 device
> ch0: 40.000MB/s transfers (20.000MHz, offset 31, 16bit)
> ch0: 6 slots, 1 drive, 0 pickers, 0 portals
> link_elf: symbol splash_register undefined
> fxp0: promiscuous mode enabled
>
>
> What the heck is that? I was told that the AMI MegaRAID controllers
> are supported, what's up with this?
>
> On another SMP machine based on ASUS CUA4X-D, we use the AMI Elite 1600,
> and there is no 'unknown' device.
>
> On the TYAN based machine, ATA is diasabled as well as USB and sound.
>
> Can some help please?
>
> --
> MfG
> O. Hartmann
>
> ohartman@klima.physik.uni-mainz.de
> ----------------------------------------------------------------
> IT-Administration des Institut fuer Physik der Atmosphaere (IPA)
> ----------------------------------------------------------------
> Johannes Gutenberg Universitaet Mainz
> Becherweg 21
> 55099 Mainz
>
> Tel: +496131/3924662 (Maschinensaal)
> Tel: +496131/3924144
> FAX: +496131/3923532
>
>
> To Unsubscribe: send mail to majordomo@FreeBSD.org
> with "unsubscribe freebsd-smp" in the body of the message
--
... every activity meets with opposition, everyone who acts has his
rivals and unfortunately opponents also. But not because people want
to be opponents, rather because the tasks and relationships force
people to take different points of view. [Dr. Fritz Todt]
V I C T O R Y N O T V E N G E A N C E
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200104300955.f3U9t7808786>