Date: Thu, 11 Mar 2010 18:08:20 GMT From: Alexey Netrebin <crazyalexnt@inbox.ru> To: freebsd-gnats-submit@FreeBSD.org Subject: ports/144661: Smplayer unmotivated takes time CPU. Message-ID: <201003111808.o2BI8KvR020631@www.freebsd.org> Resent-Message-ID: <201003111810.o2BIA4FW059623@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 144661 >Category: ports >Synopsis: Smplayer unmotivated takes time CPU. >Confidential: no >Severity: critical >Priority: medium >Responsible: freebsd-ports-bugs >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Thu Mar 11 18:10:04 UTC 2010 >Closed-Date: >Last-Modified: >Originator: Alexey Netrebin >Release: FreeBSD 8.0-RELEASE-p2 >Organization: Atlantis >Environment: FreeBSD crazy1.tagil.net 8.0-RELEASE-p2 FreeBSD 8.0-RELEASE-p2 #0: Wed Feb 24 17:56:34 YEKT 2010 alex@crazy1.tagil.net:/usr/src/sys/i386/compile/ALEX_HOME i386 >Description: Smplayer (/usr/ports/multimedia/smplayer) unmotivated takes time CPU. top last pid: 3636; load averages: 0.31, 0.17, 0.10 up 0+00:32:44 23:06:19 57 processes: 3 running, 54 sleeping CPU 0: 13.5% user, 0.0% nice, 8.2% system, 3.0% interrupt, 75.3% idle CPU 1: 28.6% user, 0.0% nice, 66.2% system, 1.1% interrupt, 4.1% idle Mem: 241M Active, 278M Inact, 136M Wired, 636K Cache, 112M Buf, 1330M Free Swap: 4061M Total, 4061M Free PID USERNAME THR PRI NICE SIZE RES STATE C TIME WCPU COMMAND 3626 alex 2 50 0 34824K 21080K select 0 0:12 59.28% smplayer 3627 alex 1 50 0 57848K 45140K nanslp 1 0:01 7.18% mplayer 1176 root 1 46 0 99M 58100K select 0 1:29 2.88% Xorg .... dmesg Copyright (c) 1992-2009 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.0-RELEASE-p2 #0: Wed Feb 24 17:56:34 YEKT 2010 alex@crazy1.tagil.net:/usr/src/sys/i386/compile/ALEX_HOME Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 4000+ (2104.40-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x60fb1 Stepping = 1 Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=0x2001<SSE3,CX16> AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!> AMD Features2=0x11f<LAHF,CMP,SVM,ExtAPIC,CR8,Prefetch> real memory = 2147483648 (2048 MB) avail memory = 2077417472 (1981 MB) ACPI APIC Table: <Nvidia ASUSACPI> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0: Changing APIC ID to 2 ioapic0 <Version 1.1> irqs 0-23 on motherboard kbd1 at kbdmux0 acpi0: <Nvidia ASUSACPI> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, 7fdf0000 (3) failed Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0 acpi_hpet0: <High Precision Event Timer> iomem 0xfefff000-0xfefff3ff on acpi0 Timecounter "HPET" frequency 25000000 Hz quality 900 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: <memory, RAM> at device 0.0 (no driver attached) pci0: <memory, RAM> at device 0.1 (no driver attached) pci0: <memory, RAM> at device 0.2 (no driver attached) pci0: <memory, RAM> at device 0.3 (no driver attached) pci0: <memory, RAM> at device 0.4 (no driver attached) pci0: <memory, RAM> at device 0.5 (no driver attached) pci0: <memory, RAM> at device 0.6 (no driver attached) pci0: <memory, RAM> at device 0.7 (no driver attached) pcib1: <ACPI PCI-PCI bridge> at device 4.0 on pci0 pci1: <ACPI PCI bus> on pcib1 vgapci0: <VGA-compatible display> port 0xac00-0xac7f mem 0xfa000000-0xfaffffff,0xd0000000-0xdfffffff,0xfb000000-0xfbffffff irq 16 at device 0.0 on pci1 nvidia0: <GeForce 7600 GS> on vgapci0 vgapci0: child nvidia0 requested pci_enable_busmaster vgapci0: child nvidia0 requested pci_enable_io vgapci0: child nvidia0 requested pci_enable_io nvidia0: [GIANT-LOCKED] nvidia0: [ITHREAD] pci0: <memory, RAM> at device 9.0 (no driver attached) isab0: <PCI-ISA bridge> at device 10.0 on pci0 isa0: <ISA bus> on isab0 nfsmb0: <nForce2/3/4 MCP SMBus Controller> port 0x4c00-0x4c3f,0x4c40-0x4c7f at device 10.1 on pci0 smbus0: <System Management Bus> on nfsmb0 nfsmb1: <nForce2/3/4 MCP SMBus Controller> on nfsmb0 smbus1: <System Management Bus> on nfsmb1 pci0: <memory, RAM> at device 10.2 (no driver attached) ohci0: <OHCI (generic) USB controller> mem 0xfe02f000-0xfe02ffff at device 11.0 on pci0 ohci0: [ITHREAD] usbus0: <OHCI (generic) USB controller> on ohci0 ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe02e000-0xfe02e0ff at device 11.1 on pci0 ehci0: [ITHREAD] usbus1: EHCI version 1.0 usbus1: <EHCI (generic) USB 2.0 controller> on ehci0 atapci0: <nVidia nForce MCP51 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf400-0xf40f at device 13.0 on pci0 ata0: <ATA channel 0> on atapci0 ata0: [ITHREAD] ata1: <ATA channel 1> on atapci0 ata1: [ITHREAD] atapci1: <nVidia nForce MCP51 SATA300 controller> port 0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xe000-0xe00f mem 0xfe02d000-0xfe02dfff irq 20 at device 14.0 on pci0 atapci1: [ITHREAD] ata2: <ATA channel 0> on atapci1 ata2: [ITHREAD] ata3: <ATA channel 1> on atapci1 ata3: [ITHREAD] atapci2: <nVidia nForce MCP51 SATA300 controller> port 0x9e0-0x9e7,0xbe0-0xbe3,0x960-0x967,0xb60-0xb63,0xcc00-0xcc0f mem 0xfe02c000-0xfe02cfff irq 21 at device 15.0 on pci0 atapci2: [ITHREAD] ata4: <ATA channel 0> on atapci2 ata4: [ITHREAD] ata5: <ATA channel 1> on atapci2 ata5: [ITHREAD] pcib2: <ACPI PCI-PCI bridge> at device 16.0 on pci0 pci2: <ACPI PCI bus> on pcib2 rl0: <RealTek 8139 10/100BaseTX> port 0xbc00-0xbcff mem 0xfdeff000-0xfdeff0ff irq 17 at device 9.0 on pci2 miibus0: <MII bus> on rl0 rlphy0: <RealTek internal media interface> PHY 0 on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl0: Ethernet address: 00:c0:df:13:4a:77 rl0: [ITHREAD] pci0: <multimedia, HDA> at device 16.1 (no driver attached) nfe0: <NVIDIA nForce 430 MCP13 Networking Adapter> port 0xc800-0xc807 mem 0xfe02b000-0xfe02bfff irq 23 at device 20.0 on pci0 miibus1: <MII bus> on nfe0 e1000phy0: <Marvell 88E1116 Gigabit PHY> PHY 1 on miibus1 e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto nfe0: Ethernet address: 00:1a:92:7c:06:8d nfe0: [FILTER] acpi_tz0: <Thermal Zone> on acpi0 atrtc0: <AT realtime clock> port 0x70-0x73 on acpi0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 uart0: [FILTER] uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 uart1: [FILTER] ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode ppc0: [ITHREAD] ppbus0: <Parallel port bus> on ppc0 ppbus0: IEEE1284 device found /NIBBLE ppbus0: Probing for PnP devices: ppbus0: <Hewlett-Packard HP LaserJet 6L/0101.01> PRINTER HP ENHANCED PCL5,PJL plip0: <PLIP network interface> on ppbus0 plip0: [ITHREAD] lpt0: <Printer> on ppbus0 lpt0: [ITHREAD] lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model IntelliMouse, device ID 3 cpu0: <ACPI CPU> on acpi0 powernow0: <PowerNow! K8> on cpu0 device_attach: powernow0 attach returned 6 cpu1: <ACPI CPU> on acpi0 powernow1: <PowerNow! K8> on cpu1 device_attach: powernow1 attach returned 6 pmtimer0 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 1.000 msec ipfw2 (+ipv6) initialized, divert loadable, nat loadable, rule-based forwarding disabled, default to deny, logging disabled usbus0: 12Mbps Full Speed USB v1.0 usbus1: 480Mbps High Speed USB v2.0 ad0: 114473MB <Seagate ST3120026A 3.06> at ata0-master UDMA100 ugen0.1: <nVidia> at usbus0 uhub0: <nVidia OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <nVidia> at usbus1 uhub1: <nVidia EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 acd0: DVDR <PLEXTOR DVDR PX-755A/1.07> at ata1-slave UDMA66 ad4: 76319MB <SAMSUNG HD082GJ JE100-19> at ata2-master SATA300 ad6: 715404MB <Seagate ST3750330AS SD15> at ata3-master SATA300 uhub0: 8 ports with 8 removable, self powered uhub1: 8 ports with 8 removable, self powered acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 (probe0:ata1:0:1:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 (probe0:ata1:0:1:0): CAM Status: SCSI Status Error (probe0:ata1:0:1:0): SCSI Status: Check Condition (probe0:ata1:0:1:0): NOT READY asc:3a,1 (probe0:ata1:0:1:0): Medium not present - tray closed (probe0:ata1:0:1:0): Unretryable error acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 cd0 at ata1 bus 0 target 1 lun 0 cd0: <PLEXTOR DVDR PX-755A 1.07> Removable CD-ROM SCSI-0 device cd0: 66.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed SMP: AP CPU #1 Launched! Trying to mount root from ufs:/dev/ad0s1a rl0: link state changed to UP nfe0: link state changed to UP hdac0: <NVidia MCP51 High Definition Audio Controller> mem 0xfe024000-0xfe027fff irq 22 at device 16.1 on pci0 hdac0: HDA Driver Revision: 20090624_0136 hdac0: [ITHREAD] hdac0: HDA Codec #0: Analog Devices AD1986A hdac0: hdac_widget_connection_parse: nid=18 WARNING: zero cnid entnum=4 j=2 index=0 entries=8 found=2 res=0x21002211 pcm0: <HDA Analog Devices AD1986A PCM #0 Analog> at cad 0 nid 1 on hdac0 pcm1: <HDA Analog Devices AD1986A PCM #1 Digital> at cad 0 nid 1 on hdac0 >How-To-Repeat: >Fix: >Release-Note: >Audit-Trail: >Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201003111808.o2BI8KvR020631>