Date: Mon, 15 Apr 1996 13:50:53 -0700 (PDT) From: Doug White <dwhite@riley-net170-164.uoregon.edu> To: MansurKhan@aol.com Cc: questions@freebsd.org Subject: Re: CD-ROM Message-ID: <Pine.BSF.3.91.960415134922.4632B-100000@riley-net170-164.uoregon.edu> In-Reply-To: <960415121758_470258011@mail06>
next in thread | previous in thread | raw e-mail | index | archive | help
On Mon, 15 Apr 1996 MansurKhan@aol.com wrote: > I have a Gateway 2000 DX2-50 system with an Acculogic EIDE card (sIDE-2/VL). > The card supports four IDE devices on a primary and secondary port. > Currently it is setup with an IRQ of 14 and adress of 1F0 for the primary > and an IRQ of 15 and an address of 170 for the secondary. I have two hard > drives on the primary port and a Sony CSD 760E CD-ROM on the secondary port. You are using the wrong device. Although this is made by Sony, if it hooks into your IDE controller it does not use the Sony proprietary interface, which is what scd supports. Use the ATAPI.FLP as the boot floppy image. That floppy contains the IDE CDROM support. Doug White | University of Oregon Internet: dwhite@resnet.uoregon.edu | Residence Networking Assistant http://gladstone.uoregon.edu/~dwhite | Computer Science Major
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.3.91.960415134922.4632B-100000>