Date: Wed, 17 May 2006 10:45:22 -0700 From: John-Mark Gurney <gurney_j@resnet.uoregon.edu> To: sfp <mosfet@planet.eon.net> Cc: freebsd-net@FreeBSD.ORG, olli@lurza.secnetix.de Subject: Re: disable kernel driver at boot? Message-ID: <20060517174522.GC782@funkthat.com> In-Reply-To: <002a01c67969$8108c380$6f3010ac@ephialtes> References: <200605161242.k4GCgmS8006842@lurza.secnetix.de> <002a01c67969$8108c380$6f3010ac@ephialtes>
next in thread | previous in thread | raw e-mail | index | archive | help
sfp wrote this message on Tue, May 16, 2006 at 22:22 -0600: > From: "Oliver Fromme" <olli@lurza.secnetix.de> > > > sfp <mosfet@planet.eon.net> wrote: > > > Is it possible to disable a driver compiled into a 4.10 kernel at > > > boot time by feeding a (set?) command to the loader? > > > > > > In this case I want to turf the EM(4) driver that was compiled into > > > the kernel I've inherited and substitute it with a new if_em.ko using > > > kldload. > > > > That's not possible. You might disable a driver through > > loader variables (or kernel hints, or whatever), but the > > driver will still be present in the kernel image, so you > > cannot load a module that uses the same symbols. > > I may have answered my own question. Compiled em-4.1.6, replaced if_em.ko > & loaded it from /boot/loader.conf. > > The reason I need this is 4.10 enumerates the Pro/1000 GT (PWLA8391GT, > 82541PI chipset) as unknown. Need a newer driver to support the hardware. > > I'd still like to find a way to suppress the driver in the kernel entirely > though :P Since the kernel driver it's attaching, you could always rename the em module that you compile... just a few things to change, and you have a different name, and no conflicts w/ the kernel... -- John-Mark Gurney Voice: +1 415 225 5579 "All that I will do, has been done, All that I have, has not."
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20060517174522.GC782>